1VGEXTEND(8)                 System Manager's Manual                VGEXTEND(8)
2
3
4

NAME

6       vgextend - Add physical volumes to a volume group
7

SYNOPSIS

9       vgextend position_args
10           [ option_args ]
11

DESCRIPTION

13       vgextend  adds one or more PVs to a VG. This increases the space avail‐
14       able for LVs in the VG.
15
16       Also, PVs that have gone missing and then returned, e.g. due to a tran‐
17       sient device failure, can be added back to the VG without re-initializ‐
18       ing them (see --restoremissing).
19
20       If the specified PVs have not yet been initialized with pvcreate, vgex‐
21       tend  will  initialize them. In this case pvcreate options can be used,
22       e.g.  --labelsector,  --metadatasize,  --metadataignore,  --pvmetadata‐
23       copies, --dataalignment, --dataalignmentoffset.
24

USAGE

26       vgextend VG PV ...
27           [ -A|--autobackup y|n ]
28           [ -f|--force ]
29           [ -Z|--zero y|n ]
30           [ -M|--metadatatype lvm2 ]
31           [    --labelsector Number ]
32           [    --metadatasize Size[m|UNIT] ]
33           [    --pvmetadatacopies 0|1|2 ]
34           [    --metadataignore y|n ]
35           [    --dataalignment Size[k|UNIT] ]
36           [    --dataalignmentoffset Size[k|UNIT] ]
37           [    --reportformat basic|json ]
38           [    --restoremissing ]
39           [ COMMON_OPTIONS ]
40
41       Common options for lvm:
42           [ -d|--debug ]
43           [ -h|--help ]
44           [ -q|--quiet ]
45           [ -t|--test ]
46           [ -v|--verbose ]
47           [ -y|--yes ]
48           [    --commandprofile String ]
49           [    --config String ]
50           [    --driverloaded y|n ]
51           [    --lockopt String ]
52           [    --longhelp ]
53           [    --profile String ]
54           [    --version ]
55

OPTIONS

57       -A|--autobackup y|n
58              Specifies if metadata should be backed up automatically after a
59              change.  Enabling this is strongly advised! See vgcfgbackup(8)
60              for more information.
61
62       --commandprofile String
63              The command profile to use for command configuration.  See
64              lvm.conf(5) for more information about profiles.
65
66       --config String
67              Config settings for the command. These override lvm.conf set‐
68              tings.  The String arg uses the same format as lvm.conf, or may
69              use section/field syntax.  See lvm.conf(5) for more information
70              about config.
71
72       --dataalignment Size[k|UNIT]
73              Align the start of the data to a multiple of this number.  Also
74              specify an appropriate Physical Extent size when creating a VG.
75              To see the location of the first Physical Extent of an existing
76              PV, use pvs -o +pe_start. In addition, it may be shifted by an
77              alignment offset.  See lvm.conf/data_alignment_offset_detection
78              and --dataalignmentoffset.
79
80       --dataalignmentoffset Size[k|UNIT]
81              Shift the start of the data area by this additional offset.
82
83       -d|--debug ...
84              Set debug level. Repeat from 1 to 6 times to increase the detail
85              of messages sent to the log file and/or syslog (if configured).
86
87       --driverloaded y|n
88              If set to no, the command will not attempt to use device-mapper.
89              For testing and debugging.
90
91       -f|--force ...
92              Override various checks, confirmations and protections.  Use
93              with extreme caution.
94
95       -h|--help
96              Display help text.
97
98       --labelsector Number
99              By default the PV is labelled with an LVM2 identifier in its
100              second sector (sector 1). This lets you use a different sector
101              near the start of the disk (between 0 and 3 inclusive - see
102              LABEL_SCAN_SECTORS in the source). Use with care.
103
104       --lockopt String
105              Used to pass options for special cases to lvmlockd.  See lvm‐
106              lockd(8) for more information.
107
108       --longhelp
109              Display long help text.
110
111       --metadataignore y|n
112              Specifies the metadataignore property of a PV.  If yes, metadata
113              areas on the PV are ignored, and lvm will not store metadata in
114              the metadata areas of the PV.  If no, lvm will store metadata on
115              the PV.
116
117       --metadatasize Size[m|UNIT]
118              The approximate amount of space used for each VG metadata area.
119              The size may be rounded.
120
121       -M|--metadatatype lvm2
122              Specifies the type of on-disk metadata to use.  lvm2 (or just 2)
123              is the current, standard format.  lvm1 (or just 1) is no longer
124              used.
125
126       --profile String
127              An alias for --commandprofile or --metadataprofile, depending on
128              the command.
129
130       --pvmetadatacopies 0|1|2
131              The number of metadata areas to set aside on a PV for storing VG
132              metadata.  When 2, one copy of the VG metadata is stored at the
133              front of the PV and a second copy is stored at the end.  When 1,
134              one copy of the VG metadata is stored at the front of the PV
135              (starting in the 5th sector).  When 0, no copies of the VG meta‐
136              data are stored on the given PV.  This may be useful in VGs con‐
137              taining many PVs (this places limitations on the ability to use
138              vgsplit later.)
139
140       -q|--quiet ...
141              Suppress output and log messages. Overrides --debug and --ver‐
142              bose.  Repeat once to also suppress any prompts with answer
143              'no'.
144
145       --reportformat basic|json
146              Overrides current output format for reports which is defined
147              globally by the report/output_format setting in lvm.conf.  basic
148              is the original format with columns and rows.  If there is more
149              than one report per command, each report is prefixed with the
150              report name for identification. json produces report output in
151              JSON format. See lvmreport(7) for more information.
152
153       --restoremissing
154              Add a PV back into a VG after the PV was missing and then
155              returned, e.g. due to a transient failure. The PV is not reini‐
156              tialized.
157
158       -t|--test
159              Run in test mode. Commands will not update metadata.  This is
160              implemented by disabling all metadata writing but nevertheless
161              returning success to the calling function. This may lead to
162              unusual error messages in multi-stage operations if a tool
163              relies on reading back metadata it believes has changed but
164              hasn't.
165
166       -v|--verbose ...
167              Set verbose level. Repeat from 1 to 4 times to increase the
168              detail of messages sent to stdout and stderr.
169
170       --version
171              Display version information.
172
173       -y|--yes
174              Do not prompt for confirmation interactively but always assume
175              the answer yes. Use with extreme caution.  (For automatic no,
176              see -qq.)
177
178       -Z|--zero y|n
179              Controls if the first 4 sectors (2048 bytes) of the device are
180              wiped.  The default is to wipe these sectors unless either or
181              both of --restorefile or --uuid are specified.
182

VARIABLES

184       VG
185              Volume Group name.  See lvm(8) for valid names.
186
187       PV
188              Physical Volume name, a device path under  /dev.   For  commands
189              managing physical extents, a PV positional arg generally accepts
190              a suffix indicating a range (or  multiple  ranges)  of  physical
191              extents  (PEs). When the first PE is omitted, it defaults to the
192              start of the device, and when the last PE is omitted it defaults
193              to  end.   Start and end range (inclusive): PV[:PE-PE]...  Start
194              and length range (counting from 0): PV[:PE+PE]...
195
196       String
197              See the option description for information about the string con‐
198              tent.
199
200       Size[UNIT]
201              Size  is  an  input number that accepts an optional unit.  Input
202              units are always treated as base two values, regardless of capi‐
203              talization,  e.g.  'k'  and 'K' both refer to 1024.  The default
204              input unit is specified by letter, followed by |UNIT.  UNIT rep‐
205              resents  other  possible  input units: bBsSkKmMgGtTpPeE.  b|B is
206              bytes, s|S is sectors of 512 bytes, k|K  is  kilobytes,  m|M  is
207              megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
208              e|E is exabytes.  (This should not be confused with  the  output
209              control --units, where capital letters mean multiple of 1000.)
210

ENVIRONMENT VARIABLES

212       See  lvm(8)  for  information  about environment variables used by lvm.
213       For example, LVM_VG_NAME can generally be substituted for a required VG
214       parameter.
215

EXAMPLES

217       Add two PVs to a VG.
218       vgextend vg00 /dev/sda4 /dev/sdn1
219

SEE ALSO

221       lvm(8) lvm.conf(5) lvmconfig(8)
222
223       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8)  pvmove(8)  pvremove(8)
224       pvresize(8) pvs(8) pvscan(8)
225
226       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8)  vgcreate(8)  vgcon‐
227       vert(8)  vgdisplay(8)  vgexport(8)  vgextend(8)  vgimport(8)  vgimport‐
228       clone(8) vgmerge(8) vgmknodes(8)  vgreduce(8)  vgremove(8)  vgrename(8)
229       vgs(8) vgscan(8) vgsplit(8)
230
231       lvcreate(8)  lvchange(8)  lvconvert(8)  lvdisplay(8)  lvextend(8) lvre‐
232       duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
233
234       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti‐
235       vate(8) lvmdump(8)
236
237       dmeventd(8)  lvmetad(8)  lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
238       cmirrord(8) lvmdbusd(8)
239
240       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
241
242
243
244Red Hat, Inc.         LVM TOOLS 2.02.183(2) (2018-12-07)           VGEXTEND(8)
Impressum