1SNMP-COMMUNITY-MIB(7) MIB SNMP-COMMUNITY-MIB(7)
2SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN
6IMPORTS
8 IpAddress
9 FROM RFC1155-SMI
10 MODULE-IDENTITY,
11 OBJECT-TYPE,
12 Integer32,
13 snmpModules
14 FROM SNMPv2-SMI
15 RowStatus,
16 TestAndIncr,
17 StorageType
18 FROM SNMPv2-TC
19 SnmpAdminString,
20 SnmpEngineID
21 FROM SNMP-FRAMEWORK-MIB
22 SnmpTagValue,
23 snmpTargetAddrEntry
24 FROM SNMP-TARGET-MIB
25 MODULE-COMPLIANCE,
26 OBJECT-GROUP
27 FROM SNMPv2-CONF;
28snmpCommunityMIB MODULE-IDENTITY
30 LAST-UPDATED "9805110000Z" -- 11 May 1998, midnight
31 ORGANIZATION "SNMPv3 Working Group"
32 CONTACT-INFO "WG-email: snmpv3@tis.com
33 Subscribe: majordomo@tis.com
34 In msg body: subscribe snmpv3
35 Chair: Russ Mundy
37 Trusted Information Systems
38 postal: 3060 Washington Rd
39 Glenwood MD 21738
40 USA
41 email: mundy@tis.com
42 phone: +1-301-854-6889
43 Co-editor: Rob Frye
45 MCI Communications Corp.
46 Postal: 2100 Reston Parkway, Suite 600
47 Reston, VA 20191
48 USA
49 E-mail: Rob.Frye@mci.com
50 Phone: +1 703 715 7225
51 Co-editor: David B. Levi
53 SNMP Research, Inc.
54 Postal: 3001 Kimberlin Heights Road
55 Knoxville, TN 37920-9716
56 E-mail: levi@snmp.com
57 Phone: +1 423 573 1434
58 Co-editor: Shawn A. Routhier
60 Integrated Systems Inc.
61 Postal: 333 North Ave 4th Floor
62 Wakefield, MA 01880
63 E-mail: sar@epilogue.com
64 Phone: +1 781 245 0804
65 Co-editor: Bert Wijnen
67 IBM T. J. Watson Research
68 postal: Schagen 33
69 3461 GL Linschoten
70 Netherlands
71 email: wijnen@vnet.ibm.com
72 phone: +31-348-432-794
73 "
74 DESCRIPTION
76 "This MIB module defines objects to help support coexistence
77 between SNMPv1, SNMPv2, and SNMPv3."
78 ::= { snmpModules 18 }
79-- Administrative assignments ****************************************
81snmpCommunityMIBObjects OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 }
83snmpCommunityMIBConformance OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 }
84--
86-- The snmpCommunityTable contains a database of community strings.
87-- This table provides mappings between community strings, and the
88-- parameters required for View-based Access Control.
89--
90snmpCommunityTable OBJECT-TYPE
92 SYNTAX SEQUENCE OF SnmpCommunityEntry
93 MAX-ACCESS not-accessible
94 STATUS current
95 DESCRIPTION
96 "The table of community strings configured in the SNMP
97 engine's Local Configuration Datastore (LCD)."
98 ::= { snmpCommunityMIBObjects 1 }
99snmpCommunityEntry OBJECT-TYPE
101 SYNTAX SnmpCommunityEntry
102 MAX-ACCESS not-accessible
103 STATUS current
104 DESCRIPTION
105 "Information about a particular community string."
106 INDEX { IMPLIED snmpCommunityIndex }
107 ::= { snmpCommunityTable 1 }
108SnmpCommunityEntry ::= SEQUENCE {
110 snmpCommunityIndex SnmpAdminString,
111 snmpCommunityName OCTET STRING,
112 snmpCommunitySecurityName SnmpAdminString,
113 snmpCommunityContextEngineID SnmpEngineID,
114 snmpCommunityContextName SnmpAdminString,
115 snmpCommunityTransportTag SnmpTagValue,
116 snmpCommunityStorageType StorageType,
117 snmpCommunityStatus RowStatus
118}
119snmpCommunityIndex OBJECT-TYPE
121 SYNTAX SnmpAdminString (SIZE(1..32))
122 MAX-ACCESS not-accessible
123 STATUS current
124 DESCRIPTION
125 "The unique index value of a row in this table."
126 ::= { snmpCommunityEntry 1 }
127snmpCommunityName OBJECT-TYPE
129 SYNTAX OCTET STRING (SIZE(1..64))
130 MAX-ACCESS read-create
131 STATUS current
132 DESCRIPTION
133 "The community string for which a row in this table
134 represents a configuration."
135 ::= { snmpCommunityEntry 2 }
136snmpCommunitySecurityName OBJECT-TYPE
138 SYNTAX SnmpAdminString
139 MAX-ACCESS read-create
140 STATUS current
141 DESCRIPTION
142 "A human readable string representing the corresponding
143 value of snmpCommunityName in a Security Model
144 independent format."
145 ::= { snmpCommunityEntry 3 }
146snmpCommunityContextEngineID OBJECT-TYPE
148 SYNTAX SnmpEngineID
149 MAX-ACCESS read-create
150 STATUS current
151 DESCRIPTION
152 "The contextEngineID indicating the location of the
153 context in which management information is accessed
154 when using the community string specified by the
155 corresponding instance of snmpCommunityName.
156 The default value is the snmpEngineID of the entity in
158 which this object is instantiated."
159 ::= { snmpCommunityEntry 4 }
160snmpCommunityContextName OBJECT-TYPE
162 SYNTAX SnmpAdminString
163 MAX-ACCESS read-create
164 STATUS current
165 DESCRIPTION
166 "The context in which management information is accessed
167 when using the community string specified by the corresponding
168 instance of snmpCommunityName."
169 DEFVAL { ''H } -- the empty string
170 ::= { snmpCommunityEntry 5 }
171snmpCommunityTransportTag OBJECT-TYPE
173 SYNTAX SnmpTagValue
174 MAX-ACCESS read-create
175 STATUS current
176 DESCRIPTION
177 "This object specifies a set of transport endpoints
178 from which an agent will accept management requests.
179 If a management request containing this community
180 is received on a transport endpoint other than the
181 transport endpoints identified by this object, the
182 request is deemed unauthentic.
183 The transports identified by this object are specified
185 in the snmpTargetAddrTable. Entries in that table
186 whose snmpTargetAddrTagList contains this tag value
187 are identified.
188 If the value of this object has zero-length, transport
190 endpoints are not checked when authenticating messages
191 containing this community string."
192 DEFVAL { ''H } -- the empty string
193 ::= { snmpCommunityEntry 6 }
194snmpCommunityStorageType OBJECT-TYPE
196 SYNTAX StorageType
197 MAX-ACCESS read-create
198 STATUS current
199 DESCRIPTION
200 "The storage type for this conceptual row in the
201 snmpCommunityTable. Conceptual rows having the value
202 'permanent' need not allow write-access to any
203 columnar object in the row."
204 ::= { snmpCommunityEntry 7 }
205snmpCommunityStatus OBJECT-TYPE
207 SYNTAX RowStatus
208 MAX-ACCESS read-create
209 STATUS current
210 DESCRIPTION
211 "The status of this conceptual row in the snmpCommunityTable.
212 An entry in this table is not qualified for activation
214 until instances of all corresponding columns have been
215 initialized, either through default values, or through
216 Set operations. The snmpCommunityName and
217 snmpCommunitySecurityName objects must be explicitly set."
218 ::= { snmpCommunityEntry 8 }
219--
221-- The snmpTargetAddrExtTable augments the snmpTargetAddrTable with
222-- a transport address mask value and a maximum message size value.
223-- The transport address mask allows entries in the
224-- snmpTargetAddrTable to define a set of addresses instead of just
225-- a single address. The maximum message size value allows the
226-- maximum message size of another SNMP entity to be configured
227-- for use in SNMPv1 (and SNMPv2c) transactions, where the message
228-- format does not specify a maximum message size.
229--
230snmpTargetAddrExtTable OBJECT-TYPE
232 SYNTAX SEQUENCE OF SnmpTargetAddrExtEntry
233 MAX-ACCESS not-accessible
234 STATUS current
235 DESCRIPTION
236 "The table of mask and mms values associated with the
237 snmpTargetAddrTable."
238 ::= { snmpCommunityMIBObjects 2 }
239snmpTargetAddrExtEntry OBJECT-TYPE
241 SYNTAX SnmpTargetAddrExtEntry
242 MAX-ACCESS not-accessible
243 STATUS current
244 DESCRIPTION
245 "Information about a particular mask and mms value."
246 AUGMENTS { snmpTargetAddrEntry }
247 ::= { snmpTargetAddrExtTable 1 }
248SnmpTargetAddrExtEntry ::= SEQUENCE {
250 snmpTargetAddrTMask OCTET STRING,
251 snmpTargetAddrMMS Integer32
252}
253snmpTargetAddrTMask OBJECT-TYPE
255 SYNTAX OCTET STRING (SIZE (0..255))
256 MAX-ACCESS read-create
257 STATUS current
258 DESCRIPTION
259 "The mask value associated with an entry in the
260 snmpTargetAddrTable. The value of this object must
261 have the same length as the corresponding instance of
262 snmpTargetAddrTAddress, or must have length 0."
263 DEFVAL { ''H }
264 ::= { snmpTargetAddrExtEntry 1 }
265snmpTargetAddrMMS OBJECT-TYPE
267 SYNTAX Integer32 (484..65535)
268 MAX-ACCESS read-create
269 STATUS current
270 DESCRIPTION
271 "The maximum message size value associated with an entry
272 in the snmpTargetAddrTable."
273 DEFVAL { 2048 }
274 ::= { snmpTargetAddrExtEntry 2 }
275--
277-- The snmpTrapAddress and snmpTrapCommunity objects are included
278-- in notifications that are forwarded by a proxy, which were
279-- originally received as SNMPv1 Trap messages.
280--
281snmpTrapAddress OBJECT-TYPE
283 SYNTAX IpAddress
284 MAX-ACCESS accessible-for-notify
285 STATUS current
286 DESCRIPTION
287 "The value of the agent-addr field of a Trap PDU which
288 is forwarded by a proxy forwarder application using
289 an SNMP version other than SNMPv1. The value of this
290 object SHOULD contain the value of the agent-addr field
291 from the original Trap PDU as generated by an SNMPv1
292 agent."
293 ::= { snmpCommunityMIBObjects 3 }
294snmpTrapCommunity OBJECT-TYPE
296 SYNTAX OCTET STRING
297 MAX-ACCESS accessible-for-notify
298 STATUS current
299 DESCRIPTION
300 "The value of the community string field of an SNMPv1
301 message containing a Trap PDU which is forwarded by a
302 a proxy forwarder application using an SNMP version
303 other than SNMPv1. The value of this object SHOULD
304 contain the value of the community string field from
305 the original SNMPv1 message containing a Trap PDU as
306 generated by an SNMPv1 agent."
307 ::= { snmpCommunityMIBObjects 4 }
308-- Conformance Information *******************************************
310snmpCommunityMIBCompliances OBJECT IDENTIFIER
312 ::= { snmpCommunityMIBConformance 1 }
313snmpCommunityMIBGroups OBJECT IDENTIFIER
314 ::= { snmpCommunityMIBConformance 2 }
315-- Compliance statements
317snmpCommunityMIBCompliance MODULE-COMPLIANCE
319 STATUS current
320 DESCRIPTION
321 "The compliance statement for SNMP engines which
322 implement the SNMP-COMMUNITY-MIB."
323 MODULE -- this module
325 MANDATORY-GROUPS { snmpCommunityGroup }
326 OBJECT snmpCommunityName
328 MIN-ACCESS read-only
329 DESCRIPTION "Write access is not required."
330 OBJECT snmpCommunitySecurityName
332 MIN-ACCESS read-only
333 DESCRIPTION "Write access is not required."
334 OBJECT snmpCommunitySecurityLevel
336 MIN-ACCESS read-only
337 DESCRIPTION "Write access is not required."
338 OBJECT snmpCommunityContextEngineID
340 MIN-ACCESS read-only
341 DESCRIPTION "Write access is not required."
342 OBJECT snmpCommunityContextName
344 MIN-ACCESS read-only
345 DESCRIPTION "Write access is not required."
346 OBJECT snmpCommunityTransportTag
348 MIN-ACCESS read-only
349 DESCRIPTION "Write access is not required."
350 OBJECT snmpCommunityStorageType
352 MIN-ACCESS read-only
353 DESCRIPTION "Write access is not required."
354 OBJECT snmpCommunityStatus
356 MIN-ACCESS read-only
357 DESCRIPTION "Write access is not required."
358 ::= { snmpCommunityMIBCompliances 1 }
360snmpCommunityGroup OBJECT-GROUP
362 OBJECTS {
363 snmpCommunityName,
364 snmpCommunitySecurityName,
365 snmpCommunityContextEngineID,
366 snmpCommunityContextName,
367 snmpCommunityTransportTag,
368 snmpCommunityStorageType,
369 snmpCommunityStatus,
370 snmpTargetAddrTMask,
371 snmpTargetAddrMMS,
372 snmpTrapCommunity,
373 snmpTrapAddress
374 }
375 STATUS current
376 DESCRIPTION
377 "A collection of objects providing for configuration
378 of community strings for SNMPv1 (and SNMPv2c) usage."
379 ::= { snmpCommunityMIBGroups 1 }
380END
382Erlang/OTP SNMP SNMP-COMMUNITY-MIB(7)