1constant::defer(3)    User Contributed Perl Documentation   constant::defer(3)
2
3
4

NAME

6       constant::defer -- constant subs with deferred value calculation
7

SYNOPSIS

9        use constant::defer FOO => sub { return $some + $thing; },
10                            BAR => sub { return $an * $other; };
11
12        use constant::defer MYOBJ => sub { require My::Class;
13                                           return My::Class->new_thing; }
14

DESCRIPTION

16       "constant::defer" creates a subroutine which on the first call runs
17       given code to calculate its value, and on any subsequent calls just
18       returns that value, like a constant.  The value code is discarded once
19       run, allowing it to be garbage collected.
20
21       Deferring a calculation is good if it might take a lot of work or
22       produce a big result but is only needed sometimes or only well into a
23       program run.  If it's never needed then the value code never runs.
24
25       A deferred constant is generally not inlined or folded (see "Constant
26       Folding" in perlop) since it's not a single scalar value.  In the
27       current implementation a deferred constant becomes a plain constant
28       after the first use, so may inline etc in code compiled after that (see
29       "IMPLEMENTATION" below).
30
31       See examples/simple.pl in the constant-defer source code for a complete
32       sample program.
33
34   Uses
35       Here are some typical uses.
36
37       ·   A big value or slow calculation only sometimes needed,
38
39               use constant::defer SLOWVALUE => sub {
40                                     long calculation ...;
41                                     return $result;
42                                   };
43
44               if ($option) {
45                 print "s=", SLOWVALUE, "\n";
46               }
47
48       ·   A shared object instance created when needed then re-used,
49
50               use constant::defer FORMATTER =>
51                     sub { return My::Formatter->new };
52
53               if ($something) {
54                 FORMATTER()->format ...
55               }
56
57       ·   The value code might load requisite modules too, again deferring
58           that until actually needed,
59
60               use constant::defer big => sub {
61                 require Some::Big::Module;
62                 return Some::Big::Module->create_something(...);
63               };
64
65       ·   Once-only setup code can be created with no return value.  The code
66           is garbage collected after the first run and becomes a do-nothing.
67           Remember to have an empty or "undef" return value so as not to keep
68           the last expression result alive forever.
69
70               use constant::defer MY_INIT => sub {
71                 many lines of setup code ...;
72                 return;
73               };
74
75               sub new {
76                 MY_INIT();
77                 ...
78               }
79

IMPORTS

81       There are no functions as such, everything works through the "use"
82       import.
83
84       "use constant::defer NAME1=>SUB1, NAME2=>SUB2, ...;"
85           The parameters are name/subroutine pairs.  For each one a sub
86           called "NAME" is created, running the given "SUB" the first time
87           its value is needed.
88
89           "NAME" defaults to the caller's package, or a fully qualified name
90           can be given.  Remember that bareword stringizing of "=>" doesn't
91           act on a fully qualified name, so add quotes in that case.
92
93               use constant::defer 'Other::Package::BAR' => sub { ... };
94
95           For compatibility with the "constant" module a hash of name/sub
96           arguments is accepted too.  But "constant::defer" doesn't need this
97           style since there's only ever one thing (a sub) following each
98           name.
99
100               use constant::defer { FOO => sub { ... },
101                                     BAR => sub { ... } };
102
103               # works without the hashref too
104               use constant::defer FOO => sub { ... },
105                                   BAR => sub { ... };
106

MULTIPLE VALUES

108       The value sub can return multiple values to make an array style
109       constant sub.
110
111           use constant::defer NUMS => sub { return ('one', 'two') };
112
113           foreach (NUMS) {
114              print $_,"\n";
115           }
116
117       The value sub is always run in array context, for consistency,
118       irrespective how the constant is used.  The return from the new
119       constant sub is an array style
120
121           sub () { return @result }
122
123       If the value sub was a list-style return like "NUMS" shown above, then
124       this array-style return is slightly different.  In scalar context a
125       list return means the last value (like a comma operator), but an array
126       return in scalar context means the number of elements.  A multi-value
127       constant won't normally be used in scalar context, so the difference
128       shouldn't arise.  The array style is easier for "constant::defer" to
129       implement and is the same as the plain "constant" module does.
130

ARGUMENTS

132       If the constant is called with arguments then they're passed on to the
133       value sub.  This can be good for constants used as object or class
134       methods.  Passing anything to plain constants would be unusual.
135
136       A cute use for a class method style is to make a "singleton" instance
137       of the class.  See examples/instance.pl in the constant-defer source
138       code for a complete program.
139
140           package My::Class;
141           use constant::defer INSTANCE => sub { my ($class) = @_;
142                                                 return $class->new };
143           package main;
144           $obj = My::Class->INSTANCE;
145
146       Some care might be needed if letting a subclass object become the
147       parent "INSTANCE", though if a program only ever used the subclass then
148       that might in fact be desirable.
149
150       Subs created by "constant::defer" always have prototype "()", ensuring
151       they always parse the same way.  The prototype has no effect when
152       called as a method like above, but if you want to make a plain call
153       with arguments then use "&" to bypass the prototype (see perlsub).
154
155           &MYCONST ('Some value');
156

IMPLEMENTATION

158       Currently "constant::defer" creates a sub under the requested name and
159       when called it replaces that with a new constant sub the same as "use
160       constant" would make.  This is compact and means that later loaded code
161       might be able to inline it.
162
163       It's fine to keep a reference to the initial sub and in fact that
164       happens quite normally if importing into another module (with the usual
165       "Exporter"), or an explicit "\&foo", or a "$package->can('foo')".  The
166       initial sub changes itself to jump to the new constant, it doesn't re-
167       run the value code.
168
169       The jump is currently done by a "goto" to the new coderef, so it's a
170       touch slower than the new constant sub directly.  A spot of XS would no
171       doubt make the difference negligible, perhaps to the point where
172       there'd be no need for a new sub, just have the initial transform
173       itself.  If the new form looked enough like a plain constant it might
174       inline in later loaded code.
175
176       For reference, "Package::Constants" (as of its version 0.06) considers
177       "constant::defer" subrs as constants, both before and after the first
178       call which runs the value code.  "Package::Constants" just looks for
179       prototype "sub foo () { }" functions, so any such subr rates as a
180       constant.
181

OTHER WAYS TO DO IT

183       There's many ways to do "deferred" or "lazy" calculations.
184
185       ·   "Memoize" makes a function repeat its return.  Results are cached
186           against the arguments, so it keeps the original code, whereas
187           "constant::defer" discards after the first run.
188
189       ·   "Class::Singleton" and its friends make a create-once
190           "My::Class->instance" method.  "constant::defer" can go close with
191           the fakery shown under "ARGUMENTS" above, though without a
192           "has_instance()" to query.
193
194       ·   "Sub::Become" offers some syntactic sugar for redefining the
195           running subroutine, including to a constant.
196
197       ·   "Sub::SingletonBuilder" can create an instance function for a
198           class.  It's designed for objects and so doesn't allow 0 or "undef"
199           as the return value.
200
201       ·   "Sub::StopCalls" mangles the code in its caller to put a value as a
202           constant there.  The effect is to run a function just once at each
203           caller location, replacing it with the return value, though the
204           function can also choose to constant-ize only sometimes, based on
205           circumstances, arguments, etc.
206
207       ·   A $foo scalar variable can be rigged up to run code on its first
208           access.  "Data::Lazy" uses a "tie".  "Scalar::Defer" and
209           "Scalar::Lazy" use "overload" on an object.  "Data::Thunk"
210           optimizes out the object from "Scalar::Defer" after the first run.
211           "Variable::Lazy" uses XS magic (removed after the first fetch) and
212           some parsing for syntactic sugar.
213
214           The advantage of a variable is that it interpolates in strings.
215           The disadvantages are it won't inline in later loaded code; bad XS
216           code might bypass the magic; and package variables aren't very
217           friendly when subclassing.
218
219       ·   "Object::Lazy" and "Object::Trampoline" rig up an object wrapper to
220           load and create an actual object only when a method is called,
221           dispatching to it and replacing the caller's $_[0].  The advantage
222           is you can pass the wrapper object around, etc, deferring creation
223           to an even later time than a sub or scalar can.
224
225       ·   "Object::Realize::Later", "Class::LazyObject" and
226           "Class::LazyFactory" help make a defer class which transforms lazy
227           stub objects to real ones when a method call is made.  A separate
228           defer class is required for each real class.
229
230       ·   "once.pm" sets up a run-once code block, but with no particular
231           return value and not discarding the code after run.
232
233       ·   "Class::LazyLoad" and "deferred.pm" load code on a class method
234           call such as object creation.  They're mainly to defer module
235           loading rather than calculation of a particular value.
236
237       ·   "Tie::LazyList" and "Tie::Array::Lazy" makes array elements
238           calculated on-demand from a generator function.  "Hash::Lazy" does
239           a similar thing for hashes.  "Tie::LazyFunction" hides a function
240           behind a scalar; its laziness is in the arguments which are not
241           evaluated until used.
242

SEE ALSO

244       constant, perlsub, constant::lexical
245
246       Memoize, Attribute::Memoize, Memoize::Attrs, Class::Singleton,
247       Data::Lazy, Scalar::Defer, Scalar::Lazy, Data::Thunk, Variable::Lazy,
248       Sub::Become, Sub::SingletonBuilder, Sub::StopCalls, Object::Lazy,
249       Object::Trampoline, Object::Realize::Later, once, Class::LazyLoad,
250       deferred
251

HOME PAGE

253       http://user42.tuxfamily.org/constant-defer/index.html
254
256       Copyright 2009, 2010, 2011, 2012, 2015 Kevin Ryde
257
258       constant-defer is free software; you can redistribute it and/or modify
259       it under the terms of the GNU General Public License as published by
260       the Free Software Foundation; either version 3, or (at your option) any
261       later version.
262
263       constant-defer is distributed in the hope that it will be useful, but
264       WITHOUT ANY WARRANTY; without even the implied warranty of
265       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
266       General Public License for more details.
267
268       You should have received a copy of the GNU General Public License along
269       with constant-defer.  If not, see <http://www.gnu.org/licenses/>.
270
271
272
273perl v5.28.1                      2015-02-14                constant::defer(3)
Impressum