1IBV_CREATE_QP_EX(3) Libibverbs Programmer's Manual IBV_CREATE_QP_EX(3)
2
6 ibv_create_qp_ex, ibv_destroy_qp - create or destroy a queue pair (QP)
7
9 #include <infiniband/verbs.h>
10 struct ibv_qp *ibv_create_qp_ex(struct ibv_context *context,
12 struct ibv_qp_init_attr_ex *qp_init_attr);
13 int ibv_destroy_qp(struct ibv_qp *qp);
15
17 ibv_create_qp_ex() creates a queue pair (QP) associated with the pro‐
18 tection domain pd. The argument qp_init_attr_ex is an
19 ibv_qp_init_attr_ex struct, as defined in <infiniband/verbs.h>.
20 struct ibv_qp_init_attr_ex {
22 void *qp_context; /* Associated context of the QP */
23 struct ibv_cq *send_cq; /* CQ to be associated with the Send Queue (SQ) */
24 struct ibv_cq *recv_cq; /* CQ to be associated with the Receive Queue (RQ) */
25 struct ibv_srq *srq; /* SRQ handle if QP is to be associated with an SRQ, otherwise NULL */
26 struct ibv_qp_cap cap; /* QP capabilities */
27 enum ibv_qp_type qp_type; /* QP Transport Service Type: IBV_QPT_RC, IBV_QPT_UC, IBV_QPT_UD, IBV_QPT_RAW_PACKET or IBV_QPT_DRIVER */
28 int sq_sig_all; /* If set, each Work Request (WR) submitted to the SQ generates a completion entry */
29 uint32_t comp_mask; /* Identifies valid fields */
30 struct ibv_pd *pd; /* PD to be associated with the QP */
31 struct ibv_xrcd *xrcd; /* XRC domain to be associated with the target QP */
32 enum ibv_qp_create_flags create_flags; /* Creation flags for this QP */
33 uint16_t max_tso_header; /* Maximum TSO header size */
34 struct ibv_rwq_ind_table *rwq_ind_tbl; /* Indirection table to be associated with the QP */
35 struct ibv_rx_hash_conf rx_hash_conf; /* RX hash configuration to be used */
36 uint32_t source_qpn; /* Source QP number, creation flag IBV_QP_CREATE_SOURCE_QPN should be set, few NOTEs below */
37 };
38 struct ibv_qp_cap {
40 uint32_t max_send_wr; /* Requested max number of outstanding WRs in the SQ */
41 uint32_t max_recv_wr; /* Requested max number of outstanding WRs in the RQ */
42 uint32_t max_send_sge; /* Requested max number of scatter/gather (s/g) elements in a WR in the SQ */
43 uint32_t max_recv_sge; /* Requested max number of s/g elements in a WR in the SQ */
44 uint32_t max_inline_data;/* Requested max number of data (bytes) that can be posted inline to the SQ, otherwise 0 */
45 };
46 enum ibv_qp_create_flags {
47 IBV_QP_CREATE_BLOCK_SELF_MCAST_LB = 1 << 1, /* Prevent self multicast loopback */
48 IBV_QP_CREATE_SCATTER_FCS = 1 << 8, /* FCS field will be scattered to host memory */
49 IBV_QP_CREATE_CVLAN_STRIPPING = 1 << 9, /* CVLAN field will be stripped from incoming packets */
50 IBV_QP_CREATE_SOURCE_QPN = 1 << 10, /* The created QP will use the source_qpn as its wire QP number */
51 IBV_QP_CREATE_PCI_WRITE_END_PADDING = 1 << 11, /* Incoming packets will be padded to cacheline size */
52 };
53 struct ibv_rx_hash_conf {
54 uint8_t rx_hash_function; /* RX hash function, use enum ibv_rx_hash_function_flags */
55 uint8_t rx_hash_key_len; /* RX hash key length */
56 uint8_t *rx_hash_key; /* RX hash key data */
57 uint64_t rx_hash_fields_mask; /* RX fields that should participate in the hashing, use enum ibv_rx_hash_fields */
58 };
59 enum ibv_rx_hash_fields {
61 IBV_RX_HASH_SRC_IPV4 = 1 << 0,
62 IBV_RX_HASH_DST_IPV4 = 1 << 1,
63 IBV_RX_HASH_SRC_IPV6 = 1 << 2,
64 IBV_RX_HASH_DST_IPV6 = 1 << 3,
65 IBV_RX_HASH_SRC_PORT_TCP = 1 << 4,
66 IBV_RX_HASH_DST_PORT_TCP = 1 << 5,
67 IBV_RX_HASH_SRC_PORT_UDP = 1 << 6,
68 IBV_RX_HASH_DST_PORT_UDP = 1 << 7,
69 IBV_RX_HASH_IPSEC_SPI = 1 << 8,
70 /* When using tunneling protocol, e.g. VXLAN, then we have an inner (encapsulated packet) and outer.
71 * For applying RSS on the inner packet, then the following field should be set with one of the L3/L4 fields.
72 */
73 IBV_RX_HASH_INNER = (1UL << 31),
74 };
75 The function ibv_create_qp_ex() will update the qp_init_attr_ex->cap
78 struct with the actual QP values of the QP that was created; the values
79 will be greater than or equal to the values requested.
80 ibv_destroy_qp() destroys the QP qp.
82
84 ibv_create_qp_ex() returns a pointer to the created QP, or NULL if the
85 request fails. Check the QP number (qp_num) in the returned QP.
86 ibv_destroy_qp() returns 0 on success, or the value of errno on failure
88 (which indicates the failure reason).
89
91 The attributes max_recv_wr and max_recv_sge are ignored by ibv_cre‐
92 ate_qp_ex() if the QP is to be associated with an SRQ.
93 The attribute source_qpn is supported only on UD QP, without flow
95 steering RX should not be possible.
96 ibv_destroy_qp() fails if the QP is attached to a multicast group.
98 IBV_QPT_DRIVER does not represent a specific service and is used for
100 vendor specific QP logic.
101
103 ibv_alloc_pd(3), ibv_modify_qp(3), ibv_query_qp(3), ibv_cre‐
104 ate_rwq_ind_table(3)
105
107 Yishai Hadas <yishaih@mellanox.com>
108libibverbs 2013-06-26 IBV_CREATE_QP_EX(3)