1xenconsoled_selinux(8) SELinux Policy xenconsoled xenconsoled_selinux(8)
2
6 xenconsoled_selinux - Security Enhanced Linux Policy for the xencon‐
7 soled processes
8
10 Security-Enhanced Linux secures the xenconsoled processes via flexible
11 mandatory access control.
12 The xenconsoled processes execute with the xenconsoled_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep xenconsoled_t
20
24 The xenconsoled_t SELinux type can be entered via the xencon‐
25 soled_exec_t file type.
26 The default entrypoint paths for the xenconsoled_t domain are the fol‐
28 lowing:
29 /usr/sbin/xenconsoled
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 xenconsoled policy is very flexible allowing users to setup their xen‐
40 consoled processes in as secure a method as possible.
41 The following process types are defined for xenconsoled:
43 xenconsoled_t
45 Note: semanage permissive -a xenconsoled_t can be used to make the
47 process type xenconsoled_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. xencon‐
54 soled policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run xenconsoled with the tightest
56 access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type xenconsoled_t can manage files labeled with
69 the following file types. The paths listed are the default paths for
70 these file types. Note the processes UID still need to have DAC per‐
71 missions.
72 cluster_conf_t
74 /etc/cluster(/.*)?
76 cluster_var_lib_t
78 /var/lib/pcsd(/.*)?
80 /var/lib/cluster(/.*)?
81 /var/lib/openais(/.*)?
82 /var/lib/pengine(/.*)?
83 /var/lib/corosync(/.*)?
84 /usr/lib/heartbeat(/.*)?
85 /var/lib/heartbeat(/.*)?
86 /var/lib/pacemaker(/.*)?
87 cluster_var_run_t
89 /var/run/crm(/.*)?
91 /var/run/cman_.*
92 /var/run/rsctmp(/.*)?
93 /var/run/aisexec.*
94 /var/run/heartbeat(/.*)?
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101 root_t
103 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
105 /
106 /initrd
107 sysfs_t
109 /sys(/.*)?
111 xenconsoled_var_run_t
113 /var/run/xenconsoled.pid
115 xend_var_log_t
117 /var/log/xen(/.*)?
119 /var/log/xend.log.*
120 /var/log/xend-debug.log.*
121 /var/log/xen-hotplug.log.*
122 xenfs_t
124
128 SELinux requires files to have an extended attribute to define the file
129 type.
130 You can see the context of a file using the -Z option to ls
132 Policy governs the access confined processes have to these files.
134 SELinux xenconsoled policy is very flexible allowing users to setup
135 their xenconsoled processes in as secure a method as possible.
136 STANDARD FILE CONTEXT
138 SELinux defines the file context types for the xenconsoled, if you
140 wanted to store files with these types in a diffent paths, you need to
141 execute the semanage command to sepecify alternate labeling and then
142 use restorecon to put the labels on disk.
143 semanage fcontext -a -t xenconsoled_var_run_t '/srv/myxenconsoled_con‐
145 tent(/.*)?'
146 restorecon -R -v /srv/myxenconsoled_content
147 Note: SELinux often uses regular expressions to specify labels that
149 match multiple files.
150 The following file types are defined for xenconsoled:
152 xenconsoled_exec_t
156 - Set files with the xenconsoled_exec_t type, if you want to transition
158 an executable to the xenconsoled_t domain.
159 xenconsoled_var_run_t
163 - Set files with the xenconsoled_var_run_t type, if you want to store
165 the xenconsoled files under the /run or /var/run directory.
166 Note: File context can be temporarily modified with the chcon command.
170 If you want to permanently change the file context you need to use the
171 semanage fcontext command. This will modify the SELinux labeling data‐
172 base. You will need to use restorecon to apply the labels.
173
176 semanage fcontext can also be used to manipulate default file context
177 mappings.
178 semanage permissive can also be used to manipulate whether or not a
180 process type is permissive.
181 semanage module can also be used to enable/disable/install/remove pol‐
183 icy modules.
184 semanage boolean can also be used to manipulate the booleans
186 system-config-selinux is a GUI tool available to customize SELinux pol‐
189 icy settings.
190
193 This manual page was auto-generated using sepolicy manpage .
194
197 selinux(8), xenconsoled(8), semanage(8), restorecon(8), chcon(1),
198 sepolicy(8), setsebool(8)
199xenconsoled 19-06-18 xenconsoled_selinux(8)