1gdal_edit(1) General Commands Manual gdal_edit(1)
2
6 gdal_editEdit in place various information of an existing GDAL dataset.
7
9 gdal_edit [--help-general] [-ro] [-a_srs srs_def] [-a_ullr ulx uly lrx lry]
10 [-tr xres yres] [-unsetgt] [-a_nodata value] [-unsetnodata]
11 [-unsetstats] [-stats] [-approx_stats]
12 [-scale value] [-offset value]
13 [-colorinterp_X red|green|blue|alpha|gray|undefined]*
14 [-gcp pixel line easting northing [elevation]]*
15 [-unsetmd] [-oo NAME=VALUE]* [-mo "META-TAG=VALUE"]* datasetname
16
18 The gdal_edit.py script can be used to edit in place various
19 information of an existing GDAL dataset (projection, geotransform,
20 nodata, metadata).
21 It works only with raster formats that support update access to
23 existing datasets.
24 CAUTION: depending on the format, older values of the updated
26 information might still be found in the file in a 'ghost' state, even
27 if no longer accessible through the GDAL API. This is for example the
28 case of the GTiff format (this is not a exhaustive list)
29 --help-general:
31 Gives a brief usage message for the generic GDAL commandline
32 options and exit.
33 -ro:
35 (GDAL >= 1.11) Open the dataset in read-only. Might be useful for
36 drivers refusing to use the dataset in update-mode. In which case,
37 updated information will go into PAM .aux.xml files.
38 -a_srs srs_def:
40 Defines the target coordinate system. This coordinate system will be
42 written to the dataset. If the empty string or None is specified, then
43 the existing coordinate system will be removed (for TIFF/GeoTIFF, might
44 not be well supported besides that).
45 -a_ullr ulx uly lrx lry:
47 Assign/override the georeferenced bounds of the dataset.
48 -tr xres yres :
50 Set target resolution. The values must be expressed in
51 georeferenced units. Both must be positive values.
52 -unsetgt:
54 Remove the georeference information.
55 -unsetstats:
57 (GDAL >= 2.0) Remove band statistics information.
58 -stats:
60 (GDAL >= 2.0) Calculate and store band statistics.
61 -approx_stats:
63 (GDAL >= 2.0) Calculate and store approximate band statistics.
64 -a_nodata value:
66 Assign a specified nodata value to output bands.
67 -unsetnodata:
69 (GDAL >= 2.1) Remove existing nodata values.
70 -scale value:
72 (GDAL >= 2.2) Assign a specified scale value to output bands. If no
73 scale is needed, it it recommended to set the value to 1. Scale and
74 Offset are generally used together. For example, scale and offset
75 might be used to store elevations in a unsigned 16bit integer file
76 with a precision of 0.1, and starting from -100. True values would
77 be calculated as: true_value = (pixel_value * scale) + offset Note:
78 these values can be applied using -unscale during a gdal_translate
79 run.
80 -offset value:
82 (GDAL >= 2.2) Assign a specified offset value to output bands. If
83 no offset is needed, it recommended to set the value to 0. For more
84 see scale.
85 -colorinterp_X red|green|blue|alpha|gray|undefined:
87 (GDAL >= 2.3) Change the color interpretation of band X (where X is
88 a valid band number, starting at 1)
89 -gcp pixel line easting northing [elevation]:
91 Add the indicated ground control point to the dataset. This option
92 may be provided multiple times to provide a set of GCPs.
93 -unsetmd:
95 (GDAL >= 2.0) Remove existing metadata (in the default metadata
96 domain). Can be combined with -mo.
97 -mo 'META-TAG=VALUE':
99 Passes a metadata key and value to set on the output dataset if
100 possible. This metadata is added to the existing metadata items,
101 unless -unsetmd is also specified.
102 -oo 'NAME=VALUE':
104 (GDAL >= 2.0) Open option (format specific).
105 -a_ullr, -tr and -unsetgt options are exclusive.
107 -unsetstats and either -stats or -approx_stats options are exclusive.
109
111 gdal_edit -mo DATUM=WGS84 -mo PROJ=GEODETIC -a_ullr 7 47 8 46 test.ecw
112
114 Even Rouault <even dot rouault at mines dash paris dot org>
115GDAL Thu Jul 25 2019 gdal_edit(1)