1Smokeping_probes_EchoPingSmtp(3) SmokePing Smokeping_probes_EchoPingSmtp(3)
2
3
4
6 Smokeping::probes::EchoPingSmtp - an echoping(1) probe for SmokePing
7
9 Measures SMTP roundtrip times (mail servers) for SmokePing.
10
12 *** Probes ***
13
14 +EchoPingSmtp
15
16 binary = /usr/bin/echoping
17 forks = 5
18 offset = 50%
19 step = 300
20
21 # The following variables can be overridden in each target section
22 extraopts = -some-letter-the-author-did-not-think-of
23 ipversion = 4
24 pings = 5
25 priority = 6
26 timeout = 1
27 tos = 0xa0
28 waittime = 1
29
30 # [...]
31
32 *** Targets ***
33
34 probe = EchoPingSmtp # if this should be the default probe
35
36 # [...]
37
38 + mytarget
39 # probe = EchoPingSmtp # if the default probe is something else
40 host = my.host
41 extraopts = -some-letter-the-author-did-not-think-of
42 ipversion = 4
43 pings = 5
44 priority = 6
45 timeout = 1
46 tos = 0xa0
47 waittime = 1
48
50 Supported probe-specific variables:
51
52 binary
53 The location of your echoping binary.
54
55 Default value: /usr/bin/echoping
56
57 forks
58 Run this many concurrent processes at maximum
59
60 Example value: 5
61
62 Default value: 5
63
64 offset
65 If you run many probes concurrently you may want to prevent them
66 from hitting your network all at the same time. Using the probe-
67 specific offset parameter you can change the point in time when
68 each probe will be run. Offset is specified in % of total interval,
69 or alternatively as 'random', and the offset from the 'General'
70 section is used if nothing is specified here. Note that this does
71 NOT influence the rrds itself, it is just a matter of when data
72 acqusition is initiated. (This variable is only applicable if the
73 variable 'concurrentprobes' is set in the 'General' section.)
74
75 Example value: 50%
76
77 step
78 Duration of the base interval that this probe should use, if
79 different from the one specified in the 'Database' section. Note
80 that the step in the RRD files is fixed when they are originally
81 generated, and if you change the step parameter afterwards, you'll
82 have to delete the old RRD files or somehow convert them. (This
83 variable is only applicable if the variable 'concurrentprobes' is
84 set in the 'General' section.)
85
86 Example value: 300
87
88 Supported target-specific variables:
89
90 extraopts
91 Any extra options specified here will be passed unmodified to
92 echoping(1).
93
94 Example value: -some-letter-the-author-did-not-think-of
95
96 ipversion
97 The IP protocol used. Possible values are "4" and "6". Passed to
98 echoping(1) as the "-4" or "-6" options.
99
100 Example value: 4
101
102 pings
103 How many pings should be sent to each target, if different from the
104 global value specified in the Database section. Note that the
105 number of pings in the RRD files is fixed when they are originally
106 generated, and if you change this parameter afterwards, you'll have
107 to delete the old RRD files or somehow convert them.
108
109 Example value: 5
110
111 priority
112 The "-p" echoping(1) option.
113
114 Example value: 6
115
116 timeout
117 The "-t" echoping(1) option.
118
119 Example value: 1
120
121 Default value: 5
122
123 tos The "-P" echoping(1) option.
124
125 Example value: 0xa0
126
127 waittime
128 The "-w" echoping(1) option.
129
130 Example value: 1
131
133 Niko Tyni <ntyni@iki.fi>
134
136 The fill, size and udp EchoPing variables are not valid.
137
139 Smokeping::probes::EchoPing
140
141
142
1432.7.2 2019-07-26 Smokeping_probes_EchoPingSmtp(3)