1MODPROBE(8)                        modprobe                        MODPROBE(8)
2
3
4

NAME

6       modprobe - Add and remove modules from the Linux Kernel
7

SYNOPSIS

9       modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [modulename]
10                [module parameters...]
11
12       modprobe [-r] [-v] [-n] [-i] [modulename...]
13
14       modprobe [-c]
15
16       modprobe [--dump-modversions] [filename]
17

DESCRIPTION

19       modprobe intelligently adds or removes a module from the Linux kernel:
20       note that for convenience, there is no difference between _ and - in
21       module names (automatic underscore conversion is performed).  modprobe
22       looks in the module directory /lib/modules/`uname -r` for all the
23       modules and other files, except for the optional configuration files in
24       the /etc/modprobe.d directory (see modprobe.d(5)).  modprobe will also
25       use module options specified on the kernel command line in the form of
26       <module>.<option> and blacklists in the form of
27       modprobe.blacklist=<module>.
28
29       Note that unlike in 2.4 series Linux kernels (which are not supported
30       by this tool) this version of modprobe does not do anything to the
31       module itself: the work of resolving symbols and understanding
32       parameters is done inside the kernel. So module failure is sometimes
33       accompanied by a kernel message: see dmesg(8).
34
35       modprobe expects an up-to-date modules.dep.bin file as generated by the
36       corresponding depmod utility shipped along with modprobe (see
37       depmod(8)). This file lists what other modules each module needs (if
38       any), and modprobe uses this to add or remove these dependencies
39       automatically.
40
41       If any arguments are given after the modulename, they are passed to the
42       kernel (in addition to any options listed in the configuration file).
43

OPTIONS

45       -a, --all
46           Insert all module names on the command line.
47
48       -b, --use-blacklist
49           This option causes modprobe to apply the blacklist commands in the
50           configuration files (if any) to module names as well. It is usually
51           used by udev(7).
52
53       -C, --config
54           This option overrides the default configuration directory
55           (/etc/modprobe.d).
56
57           This option is passed through install or remove commands to other
58           modprobe commands in the MODPROBE_OPTIONS environment variable.
59
60       -c, --showconfig
61           Dump out the effective configuration from the config directory and
62           exit.
63
64       --dump-modversions
65           Print out a list of module versioning information required by a
66           module. This option is commonly used by distributions in order to
67           package up a Linux kernel module using module versioning deps.
68
69       -d, --dirname
70           Root directory for modules, / by default.
71
72       --first-time
73           Normally, modprobe will succeed (and do nothing) if told to insert
74           a module which is already present or to remove a module which isn't
75           present. This is ideal for simple scripts; however, more
76           complicated scripts often want to know whether modprobe really did
77           something: this option makes modprobe fail in the case that it
78           actually didn't do anything.
79
80       --force-vermagic
81           Every module contains a small string containing important
82           information, such as the kernel and compiler versions. If a module
83           fails to load and the kernel complains that the "version magic"
84           doesn't match, you can use this option to remove it. Naturally,
85           this check is there for your protection, so using this option is
86           dangerous unless you know what you're doing.
87
88           This applies to any modules inserted: both the module (or alias) on
89           the command line and any modules on which it depends.
90
91       --force-modversion
92           When modules are compiled with CONFIG_MODVERSIONS set, a section
93           detailing the versions of every interfaced used by (or supplied by)
94           the module is created. If a module fails to load and the kernel
95           complains that the module disagrees about a version of some
96           interface, you can use "--force-modversion" to remove the version
97           information altogether. Naturally, this check is there for your
98           protection, so using this option is dangerous unless you know what
99           you're doing.
100
101           This applies any modules inserted: both the module (or alias) on
102           the command line and any modules on which it depends.
103
104       -f, --force
105           Try to strip any versioning information from the module which might
106           otherwise stop it from loading: this is the same as using both
107           --force-vermagic and --force-modversion. Naturally, these checks
108           are there for your protection, so using this option is dangerous
109           unless you know what you are doing.
110
111           This applies to any modules inserted: both the module (or alias) on
112           the command line and any modules it on which it depends.
113
114       -i, --ignore-install, --ignore-remove
115           This option causes modprobe to ignore install and remove commands
116           in the configuration file (if any) for the module specified on the
117           command line (any dependent modules are still subject to commands
118           set for them in the configuration file). Both install and remove
119           commands will currently be ignored when this option is used
120           regardless of whether the request was more specifically made with
121           only one or other (and not both) of --ignore-install or
122           --ignore-remove. See modprobe.d(5).
123
124       -n, --dry-run, --show
125           This option does everything but actually insert or delete the
126           modules (or run the install or remove commands). Combined with -v,
127           it is useful for debugging problems. For historical reasons both
128           --dry-run and --show actually mean the same thing and are
129           interchangeable.
130
131       -q, --quiet
132           With this flag, modprobe won't print an error message if you try to
133           remove or insert a module it can't find (and isn't an alias or
134           install/remove command). However, it will still return with a
135           non-zero exit status. The kernel uses this to opportunistically
136           probe for modules which might exist using request_module.
137
138       -R, --resolve-alias
139           Print all module names matching an alias. This can be useful for
140           debugging module alias problems.
141
142       -r, --remove
143           This option causes modprobe to remove rather than insert a module.
144           If the modules it depends on are also unused, modprobe will try to
145           remove them too. Unlike insertion, more than one module can be
146           specified on the command line (it does not make sense to specify
147           module parameters when removing modules).
148
149           There is usually no reason to remove modules, but some buggy
150           modules require it. Your distribution kernel may not have been
151           built to support removal of modules at all.
152
153       -S, --set-version
154           Set the kernel version, rather than using uname(2) to decide on the
155           kernel version (which dictates where to find the modules).
156
157       --show-depends
158           List the dependencies of a module (or alias), including the module
159           itself. This produces a (possibly empty) set of module filenames,
160           one per line, each starting with "insmod" and is typically used by
161           distributions to determine which modules to include when generating
162           initrd/initramfs images.  Install commands which apply are shown
163           prefixed by "install". It does not run any of the install commands.
164           Note that modinfo(8) can be used to extract dependencies of a
165           module from the module itself, but knows nothing of aliases or
166           install commands.
167
168       -s, --syslog
169           This option causes any error messages to go through the syslog
170           mechanism (as LOG_DAEMON with level LOG_NOTICE) rather than to
171           standard error. This is also automatically enabled when stderr is
172           unavailable.
173
174           This option is passed through install or remove commands to other
175           modprobe commands in the MODPROBE_OPTIONS environment variable.
176
177       -V, --version
178           Show version of program and exit.
179
180       -v, --verbose
181           Print messages about what the program is doing. Usually modprobe
182           only prints messages if something goes wrong.
183
184           This option is passed through install or remove commands to other
185           modprobe commands in the MODPROBE_OPTIONS environment variable.
186

ENVIRONMENT

188       The MODPROBE_OPTIONS environment variable can also be used to pass
189       arguments to modprobe.
190
192       This manual page originally Copyright 2002, Rusty Russell, IBM
193       Corporation. Maintained by Jon Masters and others.
194

SEE ALSO

196       modprobe.d(5), insmod(8), rmmod(8), lsmod(8), modinfo(8) depmod(8)
197

AUTHORS

199       Jon Masters <jcm@jonmasters.org>
200           Developer
201
202       Robby Workman <rworkman@slackware.com>
203           Developer
204
205       Lucas De Marchi <lucas.de.marchi@gmail.com>
206           Developer
207
208
209
210kmod                              02/07/2019                       MODPROBE(8)
Impressum