1Net::SSLGlue::POP3(3) User Contributed Perl DocumentationNet::SSLGlue::POP3(3)
2
3
4

NAME

6       Net::SSLGlue::POP3 - make Net::POP3 able to use SSL
7

SYNOPSIS

9           use Net::SSLGlue::POP3;
10           my $pop3s = Net::POP3->new( $host,
11               SSL => 1,
12               SSL_ca_path => ...
13           );
14
15           my $pop3 = Net::POP3->new( $host );
16           $pop3->starttls( SSL_ca_path => ... );
17

DESCRIPTION

19       Net::SSLGlue::POP3 extends Net::POP3 so one can either start directly
20       with SSL or switch later to SSL using the STLS command.
21
22       By default it will take care to verify the certificate according to the
23       rules for POP3 implemented in IO::Socket::SSL.
24

METHODS

26       new The method "new" of Net::POP3 is now able to start directly with
27           SSL when the argument "<SSL =" 1>> is given. In this case it will
28           not create an IO::Socket::INET object but an IO::Socket::SSL
29           object. One can give the usual "SSL_*" parameter of IO::Socket::SSL
30           to "Net::POP3::new".
31
32       starttls
33           If the connection is not yet SSLified it will issue the STLS
34           command and change the object, so that SSL will now be used. The
35           usual "SSL_*" parameter of IO::Socket::SSL will be given.
36
37       peer_certificate ...
38           Once the SSL connection is established the object is derived from
39           IO::Socket::SSL so that you can use this method to get information
40           about the certificate. See the IO::Socket::SSL documentation.
41
42       All of these methods can take the "SSL_*" parameter from
43       IO::Socket::SSL to change the behavior of the SSL connection. The
44       following parameters are especially useful:
45
46       SSL_ca_path, SSL_ca_file
47           Specifies the path or a file where the CAs used for checking the
48           certificates are located. This is typically "etc/ssl/certs" on UNIX
49           systems.
50
51       SSL_verify_mode
52           If set to 0, verification of the certificate will be disabled. By
53           default it is set to 1 which means that the peer certificate is
54           checked.
55
56       SSL_verifycn_name
57           Usually the name given as the hostname in the constructor is used
58           to verify the identity of the certificate. If you want to check the
59           certificate against another name you can specify it with this
60           parameter.
61

SEE ALSO

63       IO::Socket::SSL, Net::POP3
64

66       This module is copyright (c) 2013, Steffen Ullrich.  All Rights
67       Reserved.  This module is free software. It may be used, redistributed
68       and/or modified under the same terms as Perl itself.
69
70
71
72perl v5.30.0                      2019-07-26             Net::SSLGlue::POP3(3)
Impressum