1SNMP::Info::Layer3::CheUcskeProiCnotn(t3r)ibuted Perl DoScNuMmPe:n:tIantfioo:n:Layer3::CheckPoint(3)
2
3
4
6 SNMP::Info::Layer3::CheckPoint - SNMP Interface to CheckPoint Devices
7
9 Ambroise Rosset
10
12 # Let SNMP::Info determine the correct subclass for you.
13 my $ckp = new SNMP::Info(
14 AutoSpecify => 1,
15 Debug => 1,
16 DestHost => 'myrouter',
17 Community => 'public',
18 Version => 2
19 )
20 or die "Can't connect to DestHost.\n";
21
22 my $class = $ckp->class();
23 print "SNMP::Info determined this device to fall under subclass : $class\n";
24
26 Subclass for CheckPoint Devices.
27
28 WARNING
29 To correctly and completely work on IPSO based devices, you should add
30 the following line in the file "/etc/snmp/snmpd.local.conf" on each of
31 your CheckPoint devices:
32
33 # Netdisco SNMP configuration
34 extend ckpVersion /opt/CPsuite-R77/fw1/bin/fw ver
35 extend ckpAsset /bin/clish -c 'show asset all'
36
37 Inherited Classes
38 SNMP::Info::Layer3
39
40 Required MIBs
41 CHECKPOINT-MIB
42 UCD-SNMP-MIB
43 NET-SNMP-EXTEND-MIB
44 NET-SNMP-TC
45 HOST-RESOURCES-MIB
46 Inherited Classes' MIBs
47 See SNMP::Info::Layer3 for its own MIB requirements.
48
50 These are methods that return scalar value from SNMP
51
52 $ckp->vendor()
53 Returns "svnApplianceManufacturer" in lowercase, else 'checkpoint'.
54
55 $ckp->model()
56 Returns "svnApplianceProductName", else the model type based on the
57 sysObjectOID translation.
58
59 $ckp->os()
60 Returns the OS extracted from "sysDescr".
61
62 $ckp->os_ver()
63 Returns "svnVersion", else the software version is extracted from
64 "sysDescr", along with the Net-SNMP version.
65
66 $ckp->uptime()
67 Returns the system uptime instead of the agent uptime. NOTE:
68 discontinuity timers and other Time Stamp based objects are based
69 on agent uptime, so use orig_uptime().
70
71 $ckp->serial()
72 Returns <svnApplianceSerialNumber>, else the serial number of the
73 device if the SNMP server is configured as indicated previously.
74 Returns '' in other case.
75
76 $ckp->layers()
77 Return '01001100'.
78
79 Globals imported from SNMP::Info::Layer3
80 See documentation in SNMP::Info::Layer3 for details.
81
83 These are methods that return tables of information in the form of a
84 reference to a hash.
85
86 Overrides
87 $ckp->i_ignore()
88 Returns reference to hash. Increments value of IID if port is to
89 be ignored.
90
91 Ignores loopback
92
93 Table Methods imported from SNMP::Info::Layer3
94 See documentation in SNMP::Info::Layer3 for details.
95
97 If your device is not recognized by SNMP::Info as being in the class
98 SNMP::Info::Layer3::CheckPoint you might need additional snmp
99 configuration on the CheckPoint device.
100
101 In order to cause SNMP::Info to classify your device into this class,
102 it may be necessary to put a configuration line into your snmpd.conf
103 similar to
104
105 sysobjectid .1.3.6.1.4.1.8072.3.2.N
106
107 where N is the object ID for your OS from the "NET-SNMP-TC" MIB (or 255
108 if not listed). Some Net-SNMP installations default to an incorrect
109 return value for "system.sysObjectId".
110
111 In order to recognize a Net-SNMP device as Layer3, it may be necessary
112 to put a configuration line similar to
113
114 sysservices 76
115
116 in your snmpd.conf.
117
118
119
120perl v5.30.0 2019-10-30 SNMP::Info::Layer3::CheckPoint(3)