1MKVPROPEDIT(1) User Commands MKVPROPEDIT(1)
2
6 mkvpropedit - Modify properties of existing Matroska(TM) files without
7 a complete remux
8
10 mkvpropedit [options] {source-filename} {actions}
11
13 This program analyses an existing Matroska(TM) file and modifies some
14 of its properties. Then it writes those modifications to the existing
15 file. Among the properties that can be changed are the segment
16 information elements (e.g. the title) and the track headers (e.g. the
17 language code, 'default track' flag or the name).
18 Options:
20 -l, --list-property-names
22 Lists all known and editable property names, their type (string,
23 integer, boolean etc) and a short description. The program exits
24 afterwards. Therefore the source-filename parameter does not have
25 to be supplied.
26 -p, --parse-mode mode
28 Sets the parse mode. The parameter 'mode' can either be 'fast'
29 (which is also the default) or 'full'. The 'fast' mode does not
30 parse the whole file but uses the meta seek elements for locating
31 the required elements of a source file. In 99% of all cases this is
32 enough. But for files that do not contain meta seek elements or
33 which are damaged the user might have to set the 'full' parse mode.
34 A full scan of a file can take a couple of minutes while a fast
35 scan only takes seconds.
36 Actions that deal with track and segment info properties:
38 -e, --edit selector
40 Sets the Matroska(TM) file section (segment information or a
41 certain track's headers) that all following add, set and delete
42 actions operate on. This option can be used multiple times in order
43 to make modifications to more than one element.
44 By default mkvpropedit(1) will edit the segment information
46 section.
47 See the section about edit selectors for a full description of the
49 syntax.
50 -a, --add name=value
52 Adds a property name with the value value. The property will be
53 added even if such a property exists already. Note that most
54 properties are unique and cannot occur more than once.
55 -s, --set name=value
57 Sets all occurrences of the property name to the value value. If no
58 such property exists then it will be added.
59 -d, --delete name
61 Deletes all occurrences of the property name. Note that some
62 properties are required and cannot be deleted.
63 Actions that deal with tags and chapters:
65 -t, --tags selector:filename
67 Add or replace tags in the file with the ones from filename or
68 remove them if filename is empty. mkvpropedit(1) reads the same
69 XML tag format that mkvmerge(1) reads as well.
70 The selector must be one of the words all, global or track. For all
72 mkvpropedit(1) will replace or remove all tags in a file. With
73 global only global tags will be replaced or removed.
74 With track mkvpropedit(1) will replace tags for a specific track.
76 Additionally the tags read from filename will be assigned to the
77 same track. The track is specified in the same way edit selectors
78 are specified (see below), e.g. --tags
79 track:a1:new-audio-tags.xml.
80 --add-track-statistics-tags
82 Calculates statistics for all tracks in a file and adds new
83 statistics tags for them. If the file already contains such tags
84 then they'll be updated.
85 --delete-track-statistics-tags
87 Deletes all existing track statistics tags from a file. If the file
88 doesn't contain track statistics tags then it won't be modified.
89 -c, --chapters filename
91 Add or replace chapters in the file with the ones from filename or
92 remove them if filename is empty. mkvpropedit(1) reads the same
93 XML and simple chapter formats that mkvmerge(1) reads as well.
94 Actions for handling attachments:
96 --add-attachment filename
98 Adds a new attachment from filename.
99 If the option --attachment-name has been used prior to this option
101 then its value is used as the new attachment's name. Otherwise it
102 is derived from filename.
103 If the option --attachment-mime-type has been used prior to this
105 option then its value is used as the new attachment's MIME type.
106 Otherwise it is auto-detected from the content of filename.
107 If the option --attachment-description has been used prior to this
109 option then its value is used as the new attachment's description.
110 Otherwise no description will be set.
111 If the option --attachment-uid has been used prior to this option
113 then its value is used as the new attachment's UID. Otherwise a
114 random UID will be generated automatically.
115 --replace-attachment selector:filename
117 Replaces one or more attachments that match selector with the file
118 filename. If more than one existing attachment matches selector
119 then all of their contents will be replaced by the content of
120 filename.
121 The selector can have one of four forms. They're explained below in
123 the section attachment selectors.
124 If the option --attachment-name has been used prior to this option
126 then its value is set as the new name for each modified attachment.
127 Otherwise the names aren't changed.
128 If the option --attachment-mime-type has been used prior to this
130 option then its value is set as the new MIME type for each modified
131 attachment. Otherwise the MIME types aren't changed.
132 If the option --attachment-description has been used prior to this
134 option then its value is set as the new description for each
135 modified attachment. Otherwise the descriptions aren't changed.
136 If the option --attachment-uid has been used prior to this option
138 then its value is set as the new UID for each modified attachment.
139 Otherwise the UIDs aren't changed.
140 --update-attachment selector
142 Sets the properties of one or more attachments that match selector.
143 If more than one existing attachment matches selector then all of
144 their properties will be updated.
145 The selector can have one of four forms. They're explained below in
147 the section attachment selectors.
148 If the option --attachment-name has been used prior to this option
150 then its value is set as the new name for each modified attachment.
151 Otherwise the names aren't changed.
152 If the option --attachment-mime-type has been used prior to this
154 option then its value is set as the new MIME type for each modified
155 attachment. Otherwise the MIME types aren't changed.
156 If the option --attachment-description has been used prior to this
158 option then its value is set as the new description for each
159 modified attachment. Otherwise the descriptions aren't changed.
160 If the option --attachment-uid has been used prior to this option
162 then its value is set as the new UID for each modified attachment.
163 Otherwise the UIDs aren't changed.
164 --delete-attachment selector
166 Deletes one or more attachments that match selector.
167 The selector can have one of four forms. They're explained below in
169 the section attachment selectors.
170 Options for attachment actions:
172 --attachment-name name
174 Sets the name to use for the following --add-attachment or
175 --replace-attachment operation.
176 --attachment-mime-type mime-type
178 Sets the MIME type to use for the following --add-attachment or
179 --replace-attachment operation.
180 --attachment-description description
182 Sets the description to use for the following --add-attachment or
183 --replace-attachment operation.
184 Other options:
186 --command-line-charset character-set
188 Sets the character set to convert strings given on the command line
189 from. It defaults to the character set given by system's current
190 locale.
191 --output-charset character-set
193 Sets the character set to which strings are converted that are to
194 be output. It defaults to the character set given by system's
195 current locale.
196 -r, --redirect-output file-name
198 Writes all messages to the file file-name instead of to the
199 console. While this can be done easily with output redirection
200 there are cases in which this option is needed: when the terminal
201 reinterprets the output before writing it to a file. The character
202 set set with --output-charset is honored.
203 --ui-language code
205 Forces the translations for the language code to be used (e.g.
206 'de_DE' for the German translations). Entering 'list' as the code
207 will cause the program to output a list of available translations.
208 --abort-on-warnings
210 Tells the program to abort after the first warning is emitted. The
211 program's exit code will be 1.
212 --debug topic
214 Turn on debugging for a specific feature. This option is only
215 useful for developers.
216 --engage feature
218 Turn on experimental features. A list of available features can be
219 requested with mkvpropedit --engage list. These features are not
220 meant to be used in normal situations.
221 --gui-mode
223 Turns on GUI mode. In this mode specially-formatted lines may be
224 output that can tell a controlling GUI what's happening. These
225 messages follow the format '#GUI#message'. The message may be
226 followed by key/value pairs as in
227 '#GUI#message#key1=value1#key2=value2...'. Neither the messages nor
228 the keys are ever translated and always output in English.
229 -v, --verbose
231 Be verbose and show all the important Matroska(TM) elements as
232 they're read.
233 -h, --help
235 Show usage information and exit.
236 -V, --version
238 Show version information and exit.
239 @options-file.json
241 Reads additional command line arguments from the file options-file.
242 For a full explanation on the supported formats for such files see
243 the section called "Option files" in the mkvmerge(1) man page.
244
246 The --edit option sets the Matroska(TM) file section (segment
247 information or a certain track's headers) that all following add, set
248 and delete actions operate on. This stays valid until the next --edit
249 option is found. The argument to this option is called the edit
250 selector.
251 By default mkvpropedit(1) will edit the segment information section.
253 Segment information
255 The segment information can be selected with one of these three words:
256 'info', 'segment_info' or 'segmentinfo'. It contains properties like
257 the segment title or the segment UID.
258 Track headers
260 Track headers can be selected with a slightly more complex selector.
261 All variations start with 'track:'. The track header properties include
262 elements like the language code, 'default track' flag or the track's
263 name.
264 track:n
266 If the parameter n is a number then the nth track will be selected.
267 The track order is the same that mkvmerge(1)'s --identify option
268 outputs.
269 Numbering starts at 1.
271 track:tn
273 If the parameter starts with a single character t followed by a n
274 then the nth track of a specific track type will be selected. The
275 track type parameter t must be one of these four characters: 'a'
276 for an audio track, 'b' for a button track, 's' for a subtitle
277 track and 'v' for a video track. The track order is the same that
278 mkvmerge(1)'s --identify option outputs.
279 Numbering starts at 1.
281 track:=uid
283 If the parameter starts with a '=' followed by a number uid, the
284 track whose track UID element equals the given uid will be
285 selected. Track UIDs can be obtained with mkvinfo(1).
286 track:@number
288 If the parameter starts with a '@' followed by a number number, the
289 track whose track number element equals this number will be
290 selected. Track numbers can be obtained with mkvinfo(1).
291 Notes
293 Due to the nature of the track edit selectors it is possible that
294 several selectors actually match the same track headers. In such cases
295 all actions for those edit selectors will be combined and executed in
296 the order in which they're given on the command line.
297
299 An attachment selector is used with the two actions
300 --replace-attachment and --delete-attachment. It can have one of the
301 following four forms:
302 1. Selection by attachment ID. In this form the selector is simply a
304 number, the attachment's ID as output by mkvmerge(1)'s
305 identification command.
306 2. Selection by attachment UID (unique ID). In this form the selector
308 is the equal sign = followed by a number, the attachment's unique
309 ID as output by mkvmerge(1)'s verbose identification command.
310 3. Selection by attachment name. In this form the selector is the
312 literal word name: followed by the existing attachment's name. If
313 this selector is used with --replace-attachment then colons within
314 the name to match must be escaped as \c.
315 4. Selection by MIME type. In this form the selector is the literal
317 word mime-type: followed by the existing attachment's MIME type. If
318 this selector is used with --replace-attachment then colons within
319 the MIME type to match must be escaped as \c.
320
322 The following example edits a file called 'movie.mkv'. It sets the
323 segment title and modifies the language code of an audio and a subtitle
324 track. Note that this example can be shortened by leaving out the first
325 --edit option because editing the segment information element is the
326 default for all options found before the first --edit option anyway.
327 $ mkvpropedit movie.mkv --edit info --set "title=The movie" --edit track:a1 --set language=fre --edit track:a2 --set language=ita
329 The second example removes the 'default track flag' from the first
331 subtitle track and sets it for the second one. Note that
332 mkvpropedit(1), unlike mkvmerge(1), does not set the 'default track
333 flag' of other tracks to '0' if it is set to '1' for a different track
334 automatically.
335 $ mkvpropedit movie.mkv --edit track:s1 --set flag-default=0 --edit track:s2 --set flag-default=1
337 Replacing the tags for the second subtitle track in a file looks like
339 this:
340 $ mkvpropedit movie.mkv --tags track:s2:new-subtitle-tags.xml
342 Removing all tags requires leaving out the file name:
344 $ mkvpropedit movie.mkv --tags all:
346 Replacing the chapters in a file looks like this:
348 $ mkvpropedit movie.mkv --chapters new-chapters.xml
350 Removing all chapters requires leaving out the file name:
352 $ mkvpropedit movie.mkv --chapters ''
354 Adding a font file (Arial.ttf) as an attachment:
356 $ mkvpropedit movie.mkv --add-attachment Arial.ttf
358 Adding a font file (89719823.ttf) as an attachment and providing some
360 information as it really is just Arial:
361 $ mkvpropedit movie.mkv --attachment-name Arial.ttf --attachment-description 'The Arial font as a TrueType font' --attachment-mime-type application/x-truetype-font --add-attachment 89719823.ttf
363 Replacing one attached font (Comic.ttf) file with another one
365 (Arial.ttf):
366 $ mkvpropedit movie.mkv --attachment-name Arial.ttf --attachment-description 'The Arial font as a TrueType font' --replace-attachment name:Comic.ttf:Arial.ttf
368 Deleting the second attached file, whatever it may be:
370 $ mkvpropedit movie.mkv --delete-attachment 2
372 Deleting all attached fonts by MIME type:
374 $ mkvpropedit movie.mkv --delete-attachment mime-type:application/x-truetype-font
376
378 mkvpropedit(1) exits with one of three exit codes:
379 · 0 -- This exit code means that the modification has completed
381 successfully.
382 · 1 -- In this case mkvpropedit(1) has output at least one warning,
384 but the modification did continue. A warning is prefixed with the
385 text 'Warning:'. Depending on the issues involved the resulting
386 files might be ok or not. The user is urged to check both the
387 warning and the resulting files.
388 · 2 -- This exit code is used after an error occurred.
390 mkvpropedit(1) aborts right after outputting the error message.
391 Error messages range from wrong command line arguments over
392 read/write errors to broken files.
393
395 For an in-depth discussion about how all tools in the MKVToolNix suite
396 handle character set conversions, input/output encoding, command line
397 encoding and console encoding please see the identically-named section
398 in the mkvmerge(1) man page.
399
401 mkvpropedit(1) uses the default variables that determine the system's
402 locale (e.g. LANG and the LC_* family). Additional variables:
403 MKVPROPEDIT_DEBUG, MKVTOOLNIX_DEBUG and its short form MTX_DEBUG
405 The content is treated as if it had been passed via the --debug
406 option.
407 MKVPROPEDIT_ENGAGE, MKVTOOLNIX_ENGAGE and its short form MTX_ENGAGE
409 The content is treated as if it had been passed via the --engage
410 option.
411
413 mkvmerge(1), mkvinfo(1), mkvextract(1), mkvtoolnix-gui(1)
414
416 The latest version can always be found at the MKVToolNix homepage[1].
417
419 Moritz Bunkus <moritz@bunkus.org>
420 Developer
421
423 1. the MKVToolNix homepage
424 https://mkvtoolnix.download/
425MKVToolNix 45.0.0 2020-04-04 MKVPROPEDIT(1)