1devicekit_selinux(8)       SELinux Policy devicekit       devicekit_selinux(8)
2
3
4

NAME

6       devicekit_selinux  -  Security  Enhanced Linux Policy for the devicekit
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the devicekit  processes  via  flexible
11       mandatory access control.
12
13       The  devicekit processes execute with the devicekit_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep devicekit_t
20
21
22

ENTRYPOINTS

24       The  devicekit_t  SELinux  type can be entered via the devicekit_exec_t
25       file type.
26
27       The default entrypoint paths for the devicekit_t domain are the follow‐
28       ing:
29
30       /usr/bin/udisksctl, /usr/libexec/devkit-daemon
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       devicekit  policy  is  very  flexible  allowing  users  to  setup their
40       devicekit processes in as secure a method as possible.
41
42       The following process types are defined for devicekit:
43
44       devicekit_t, devicekit_power_t, devicekit_disk_t
45
46       Note: semanage permissive -a  devicekit_t  can  be  used  to  make  the
47       process  type  devicekit_t  permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux   policy  is  customizable  based  on  least  access  required.
54       devicekit policy is extremely flexible and has  several  booleans  that
55       allow  you to manipulate the policy and run devicekit with the tightest
56       access possible.
57
58
59
60       If you want to deny user domains applications to map a memory region as
61       both  executable  and  writable,  this  is dangerous and the executable
62       should be reported in bugzilla, you must turn on the deny_execmem bool‐
63       ean. Enabled by default.
64
65       setsebool -P deny_execmem 1
66
67
68
69       If  you  want  to control the ability to mmap a low area of the address
70       space, as configured by /proc/sys/vm/mmap_min_addr, you  must  turn  on
71       the mmap_low_allowed boolean. Disabled by default.
72
73       setsebool -P mmap_low_allowed 1
74
75
76
77       If  you  want  to  disable  kernel module loading, you must turn on the
78       secure_mode_insmod boolean. Enabled by default.
79
80       setsebool -P secure_mode_insmod 1
81
82
83
84       If you want to allow unconfined executables to make their  heap  memory
85       executable.   Doing  this  is  a  really bad idea. Probably indicates a
86       badly coded executable, but could indicate an attack.  This  executable
87       should   be   reported  in  bugzilla,  you  must  turn  on  the  selin‐
88       uxuser_execheap boolean. Disabled by default.
89
90       setsebool -P selinuxuser_execheap 1
91
92
93
94       If you want to allow unconfined executables to make  their  stack  exe‐
95       cutable.   This  should  never, ever be necessary. Probably indicates a
96       badly coded executable, but could indicate an attack.  This  executable
97       should  be reported in bugzilla, you must turn on the selinuxuser_exec‐
98       stack boolean. Disabled by default.
99
100       setsebool -P selinuxuser_execstack 1
101
102
103

MANAGED FILES

105       The SELinux process type devicekit_t can manage files labeled with  the
106       following file types.  The paths listed are the default paths for these
107       file types.  Note the processes UID still need to have DAC permissions.
108
109       file_type
110
111            all files on the system
112
113

FILE CONTEXTS

115       SELinux requires files to have an extended attribute to define the file
116       type.
117
118       You can see the context of a file using the -Z option to ls
119
120       Policy  governs  the  access  confined  processes  have to these files.
121       SELinux devicekit policy is very flexible allowing users to setup their
122       devicekit processes in as secure a method as possible.
123
124       STANDARD FILE CONTEXT
125
126       SELinux defines the file context types for the devicekit, if you wanted
127       to store files with these types in a diffent paths, you need to execute
128       the  semanage  command  to  sepecify  alternate  labeling  and then use
129       restorecon to put the labels on disk.
130
131       semanage  fcontext  -a  -t  devicekit_var_log_t  '/srv/mydevicekit_con‐
132       tent(/.*)?'
133       restorecon -R -v /srv/mydevicekit_content
134
135       Note:  SELinux  often  uses  regular expressions to specify labels that
136       match multiple files.
137
138       The following file types are defined for devicekit:
139
140
141
142       devicekit_disk_exec_t
143
144       - Set files with the devicekit_disk_exec_t type, if you want to transi‐
145       tion an executable to the devicekit_disk_t domain.
146
147
148       Paths:
149            /lib/udisks2/udisksd,                    /lib/udev/udisks-part-id,
150            /usr/lib/udisks2/udisksd,              /usr/libexec/udisks-daemon,
151            /usr/lib/udev/udisks-part-id,        /usr/libexec/udisks2/udisksd,
152            /usr/lib/udisks/udisks-daemon, /usr/libexec/devkit-disks-daemon
153
154
155       devicekit_exec_t
156
157       - Set files with the devicekit_exec_t type, if you want  to  transition
158       an executable to the devicekit_t domain.
159
160
161       Paths:
162            /usr/bin/udisksctl, /usr/libexec/devkit-daemon
163
164
165       devicekit_power_exec_t
166
167       -  Set files with the devicekit_power_exec_t type, if you want to tran‐
168       sition an executable to the devicekit_power_t domain.
169
170
171       Paths:
172            /usr/libexec/upowerd,                     /usr/lib/upower/upowerd,
173            /usr/libexec/devkit-power-daemon
174
175
176       devicekit_tmp_t
177
178       -  Set  files  with  the  devicekit_tmp_t  type,  if  you want to store
179       devicekit temporary files in the /tmp directories.
180
181
182
183       devicekit_var_lib_t
184
185       - Set files with the devicekit_var_lib_t type, if you want to store the
186       devicekit files under the /var/lib directory.
187
188
189       Paths:
190            /var/lib/udisks.*, /var/lib/upower(/.*)?, /var/lib/DeviceKit-.*
191
192
193       devicekit_var_log_t
194
195       - Set files with the devicekit_var_log_t type, if you want to treat the
196       data as devicekit var log  data,  usually  stored  under  the  /var/log
197       directory.
198
199
200       Paths:
201            /var/log/pm-suspend.log.*, /var/log/pm-powersave.log.*
202
203
204       devicekit_var_run_t
205
206       - Set files with the devicekit_var_run_t type, if you want to store the
207       devicekit files under the /run or /var/run directory.
208
209
210       Paths:
211            /var/run/udisks.*,  /var/run/devkit(/.*)?,  /var/run/upower(/.*)?,
212            /var/run/pm-utils(/.*)?, /var/run/DeviceKit-disks(/.*)?
213
214
215       Note:  File context can be temporarily modified with the chcon command.
216       If you want to permanently change the file context you need to use  the
217       semanage fcontext command.  This will modify the SELinux labeling data‐
218       base.  You will need to use restorecon to apply the labels.
219
220

COMMANDS

222       semanage fcontext can also be used to manipulate default  file  context
223       mappings.
224
225       semanage  permissive  can  also  be used to manipulate whether or not a
226       process type is permissive.
227
228       semanage module can also be used to enable/disable/install/remove  pol‐
229       icy modules.
230
231       semanage boolean can also be used to manipulate the booleans
232
233
234       system-config-selinux is a GUI tool available to customize SELinux pol‐
235       icy settings.
236
237

AUTHOR

239       This manual page was auto-generated using sepolicy manpage .
240
241

SEE ALSO

243       selinux(8), devicekit(8), semanage(8), restorecon(8), chcon(1),  sepol‐
244       icy(8),             setsebool(8),            devicekit_disk_selinux(8),
245       devicekit_disk_selinux(8),                  devicekit_power_selinux(8),
246       devicekit_power_selinux(8)
247
248
249
250devicekit                          20-05-05               devicekit_selinux(8)
Impressum