1pki_ra_selinux(8) SELinux Policy pki_ra pki_ra_selinux(8)
2
6 pki_ra_selinux - Security Enhanced Linux Policy for the pki_ra pro‐
7 cesses
8
10 Security-Enhanced Linux secures the pki_ra processes via flexible
11 mandatory access control.
12 The pki_ra processes execute with the pki_ra_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep pki_ra_t
20
24 The pki_ra_t SELinux type can be entered via the pki_ra_exec_t file
25 type.
26 The default entrypoint paths for the pki_ra_t domain are the following:
28 /var/lib/pki-ra/pki-ra
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 pki_ra policy is very flexible allowing users to setup their pki_ra
39 processes in as secure a method as possible.
40 The following process types are defined for pki_ra:
42 pki_ra_t
44 Note: semanage permissive -a pki_ra_t can be used to make the process
46 type pki_ra_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. pki_ra
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run pki_ra with the tightest access possible.
55 If you want to allow all domains to execute in fips_mode, you must turn
59 on the fips_mode boolean. Enabled by default.
60 setsebool -P fips_mode 1
62
66 SELinux defines port types to represent TCP and UDP ports.
67 You can see the types associated with a port by using the following
69 command:
70 semanage port -l
72 Policy governs the access confined processes have to these ports.
75 SELinux pki_ra policy is very flexible allowing users to setup their
76 pki_ra processes in as secure a method as possible.
77 The following port types are defined for pki_ra:
79 pki_ra_port_t
82 Default Defined Ports:
86 tcp 12888-12889
87
89 The SELinux process type pki_ra_t can manage files labeled with the
90 following file types. The paths listed are the default paths for these
91 file types. Note the processes UID still need to have DAC permissions.
92 cluster_conf_t
94 /etc/cluster(/.*)?
96 cluster_var_lib_t
98 /var/lib/pcsd(/.*)?
100 /var/lib/cluster(/.*)?
101 /var/lib/openais(/.*)?
102 /var/lib/pengine(/.*)?
103 /var/lib/corosync(/.*)?
104 /usr/lib/heartbeat(/.*)?
105 /var/lib/heartbeat(/.*)?
106 /var/lib/pacemaker(/.*)?
107 cluster_var_run_t
109 /var/run/crm(/.*)?
111 /var/run/cman_.*
112 /var/run/rsctmp(/.*)?
113 /var/run/aisexec.*
114 /var/run/heartbeat(/.*)?
115 /var/run/corosync-qnetd(/.*)?
116 /var/run/corosync-qdevice(/.*)?
117 /var/run/corosync.pid
118 /var/run/cpglockd.pid
119 /var/run/rgmanager.pid
120 /var/run/cluster/rgmanager.sk
121 mail_spool_t
123 /var/mail(/.*)?
125 /var/spool/imap(/.*)?
126 /var/spool/mail(/.*)?
127 /var/spool/smtpd(/.*)?
128 mqueue_spool_t
130 /var/spool/(client)?mqueue(/.*)?
132 /var/spool/mqueue.in(/.*)?
133 pki_common_t
135 /opt/nfast(/.*)?
137 pki_ra_etc_rw_t
139 /etc/pki-ra(/.*)?
141 /etc/sysconfig/pki/ra(/.*)?
142 pki_ra_lock_t
144 pki_ra_log_t
147 /var/log/pki-ra(/.*)?
149 pki_ra_tmp_t
151 pki_ra_var_lib_t
154 /var/lib/pki-ra(/.*)?
156 pki_ra_var_run_t
158 /var/run/pki/ra(/.*)?
160 root_t
162 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
164 /
165 /initrd
166
169 SELinux requires files to have an extended attribute to define the file
170 type.
171 You can see the context of a file using the -Z option to ls
173 Policy governs the access confined processes have to these files.
175 SELinux pki_ra policy is very flexible allowing users to setup their
176 pki_ra processes in as secure a method as possible.
177 EQUIVALENCE DIRECTORIES
179 pki_ra policy stores data with multiple different file context types
182 under the /var/lib/pki-ra directory. If you would like to store the
183 data in a different directory you can use the semanage command to cre‐
184 ate an equivalence mapping. If you wanted to store this data under the
185 /srv directory you would execute the following command:
186 semanage fcontext -a -e /var/lib/pki-ra /srv/pki-ra
188 restorecon -R -v /srv/pki-ra
189 STANDARD FILE CONTEXT
191 SELinux defines the file context types for the pki_ra, if you wanted to
193 store files with these types in a diffent paths, you need to execute
194 the semanage command to sepecify alternate labeling and then use
195 restorecon to put the labels on disk.
196 semanage fcontext -a -t pki_ra_tmp_t '/srv/mypki_ra_content(/.*)?'
198 restorecon -R -v /srv/mypki_ra_content
199 Note: SELinux often uses regular expressions to specify labels that
201 match multiple files.
202 The following file types are defined for pki_ra:
204 pki_ra_etc_rw_t
208 - Set files with the pki_ra_etc_rw_t type, if you want to treat the
210 files as pki ra etc read/write content.
211 Paths:
214 /etc/pki-ra(/.*)?, /etc/sysconfig/pki/ra(/.*)?
215 pki_ra_exec_t
218 - Set files with the pki_ra_exec_t type, if you want to transition an
220 executable to the pki_ra_t domain.
221 pki_ra_lock_t
225 - Set files with the pki_ra_lock_t type, if you want to treat the files
227 as pki ra lock data, stored under the /var/lock directory
228 pki_ra_log_t
232 - Set files with the pki_ra_log_t type, if you want to treat the data
234 as pki ra log data, usually stored under the /var/log directory.
235 pki_ra_script_exec_t
239 - Set files with the pki_ra_script_exec_t type, if you want to transi‐
241 tion an executable to the pki_ra_script_t domain.
242 pki_ra_tmp_t
246 - Set files with the pki_ra_tmp_t type, if you want to store pki ra
248 temporary files in the /tmp directories.
249 pki_ra_tomcat_exec_t
253 - Set files with the pki_ra_tomcat_exec_t type, if you want to transi‐
255 tion an executable to the pki_ra_tomcat_t domain.
256 pki_ra_var_lib_t
260 - Set files with the pki_ra_var_lib_t type, if you want to store the
262 pki ra files under the /var/lib directory.
263 pki_ra_var_run_t
267 - Set files with the pki_ra_var_run_t type, if you want to store the
269 pki ra files under the /run or /var/run directory.
270 Note: File context can be temporarily modified with the chcon command.
274 If you want to permanently change the file context you need to use the
275 semanage fcontext command. This will modify the SELinux labeling data‐
276 base. You will need to use restorecon to apply the labels.
277
280 semanage fcontext can also be used to manipulate default file context
281 mappings.
282 semanage permissive can also be used to manipulate whether or not a
284 process type is permissive.
285 semanage module can also be used to enable/disable/install/remove pol‐
287 icy modules.
288 semanage port can also be used to manipulate the port definitions
290 semanage boolean can also be used to manipulate the booleans
292 system-config-selinux is a GUI tool available to customize SELinux pol‐
295 icy settings.
296
299 This manual page was auto-generated using sepolicy manpage .
300
303 selinux(8), pki_ra(8), semanage(8), restorecon(8), chcon(1), sepol‐
304 icy(8), setsebool(8)
305pki_ra 20-05-05 pki_ra_selinux(8)