1privoxy_selinux(8) SELinux Policy privoxy privoxy_selinux(8)
2
6 privoxy_selinux - Security Enhanced Linux Policy for the privoxy pro‐
7 cesses
8
10 Security-Enhanced Linux secures the privoxy processes via flexible
11 mandatory access control.
12 The privoxy processes execute with the privoxy_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep privoxy_t
20
24 The privoxy_t SELinux type can be entered via the privoxy_exec_t file
25 type.
26 The default entrypoint paths for the privoxy_t domain are the follow‐
28 ing:
29 /usr/sbin/privoxy
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 privoxy policy is very flexible allowing users to setup their privoxy
40 processes in as secure a method as possible.
41 The following process types are defined for privoxy:
43 privoxy_t
45 Note: semanage permissive -a privoxy_t can be used to make the process
47 type privoxy_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
53 SELinux policy is customizable based on least access required. privoxy
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run privoxy with the tightest access possi‐
56 ble.
57 If you want to determine whether privoxy can connect to all tcp ports,
61 you must turn on the privoxy_connect_any boolean. Disabled by default.
62 setsebool -P privoxy_connect_any 1
64 If you want to allow all domains to execute in fips_mode, you must turn
68 on the fips_mode boolean. Enabled by default.
69 setsebool -P fips_mode 1
71
75 The SELinux process type privoxy_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cluster_conf_t
80 /etc/cluster(/.*)?
82 cluster_var_lib_t
84 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93 cluster_var_run_t
95 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/corosync-qnetd(/.*)?
102 /var/run/corosync-qdevice(/.*)?
103 /var/run/corosync.pid
104 /var/run/cpglockd.pid
105 /var/run/rgmanager.pid
106 /var/run/cluster/rgmanager.sk
107 privoxy_etc_rw_t
109 /etc/privoxy/[^/]*.action
111 privoxy_var_run_t
113 /var/run/privoxy.pid
115 root_t
117 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
119 /
120 /initrd
121
124 SELinux requires files to have an extended attribute to define the file
125 type.
126 You can see the context of a file using the -Z option to ls
128 Policy governs the access confined processes have to these files.
130 SELinux privoxy policy is very flexible allowing users to setup their
131 privoxy processes in as secure a method as possible.
132 STANDARD FILE CONTEXT
134 SELinux defines the file context types for the privoxy, if you wanted
136 to store files with these types in a diffent paths, you need to execute
137 the semanage command to sepecify alternate labeling and then use
138 restorecon to put the labels on disk.
139 semanage fcontext -a -t privoxy_var_run_t '/srv/myprivoxy_con‐
141 tent(/.*)?'
142 restorecon -R -v /srv/myprivoxy_content
143 Note: SELinux often uses regular expressions to specify labels that
145 match multiple files.
146 The following file types are defined for privoxy:
148 privoxy_etc_rw_t
152 - Set files with the privoxy_etc_rw_t type, if you want to treat the
154 files as privoxy etc read/write content.
155 privoxy_exec_t
159 - Set files with the privoxy_exec_t type, if you want to transition an
161 executable to the privoxy_t domain.
162 privoxy_initrc_exec_t
166 - Set files with the privoxy_initrc_exec_t type, if you want to transi‐
168 tion an executable to the privoxy_initrc_t domain.
169 privoxy_log_t
173 - Set files with the privoxy_log_t type, if you want to treat the data
175 as privoxy log data, usually stored under the /var/log directory.
176 privoxy_var_run_t
180 - Set files with the privoxy_var_run_t type, if you want to store the
182 privoxy files under the /run or /var/run directory.
183 Note: File context can be temporarily modified with the chcon command.
187 If you want to permanently change the file context you need to use the
188 semanage fcontext command. This will modify the SELinux labeling data‐
189 base. You will need to use restorecon to apply the labels.
190
193 semanage fcontext can also be used to manipulate default file context
194 mappings.
195 semanage permissive can also be used to manipulate whether or not a
197 process type is permissive.
198 semanage module can also be used to enable/disable/install/remove pol‐
200 icy modules.
201 semanage boolean can also be used to manipulate the booleans
203 system-config-selinux is a GUI tool available to customize SELinux pol‐
206 icy settings.
207
210 This manual page was auto-generated using sepolicy manpage .
211
214 selinux(8), privoxy(8), semanage(8), restorecon(8), chcon(1), sepol‐
215 icy(8), setsebool(8)
216privoxy 20-05-05 privoxy_selinux(8)