1curs_termcap(3X) curs_termcap(3X)
2
6 PC, UP, BC, ospeed, tgetent, tgetflag, tgetnum, tgetstr, tgoto, tputs -
7 direct curses interface to the terminfo capability database
8
10 #include <curses.h>
11 #include <term.h>
12 extern char PC;
14 extern char * UP;
15 extern char * BC;
16 extern unsigned ospeed;
17 int tgetent(char *bp, const char *name);
19 int tgetflag(const char *id);
20 int tgetnum(const char *id);
21 char *tgetstr(const char *id, char **area);
22 char *tgoto(const char *cap, int col, int row);
23 int tputs(const char *str, int affcnt, int (*putc)(int));
24
26 These routines are included as a conversion aid for programs that use
27 the termcap library. Their parameters are the same and the routines
28 are emulated using the terminfo database. Thus, they can only be used
29 to query the capabilities of entries for which a terminfo entry has
30 been compiled.
31 INITIALIZATION
33 The tgetent routine loads the entry for name. It returns:
34 1 on success,
36 0 if there is no such entry (or that it is a generic type, having
38 too little information for curses applications to run), and
39 -1 if the terminfo database could not be found.
41 This differs from the termcap library in two ways:
43 · The emulation ignores the buffer pointer bp. The termcap li‐
45 brary would store a copy of the terminal description in the area
46 referenced by this pointer. However, ncurses stores its termi‐
47 nal descriptions in compiled binary form, which is not the same
48 thing.
49 · There is a difference in return codes. The termcap library does
51 not check if the terminal description is marked with the generic
52 capability, or if the terminal description has cursor-address‐
53 ing.
54 CAPABILITY VALUES
56 The tgetflag routine gets the boolean entry for id, or zero if it is
57 not available.
58 The tgetnum routine gets the numeric entry for id, or -1 if it is not
60 available.
61 The tgetstr routine returns the string entry for id, or zero if it is
63 not available. Use tputs to output the returned string. The area pa‐
64 rameter is used as follows:
65 · It is assumed to be the address of a pointer to a buffer managed
67 by the calling application.
68 · However, ncurses checks to ensure that area is not NULL, and al‐
70 so that the resulting buffer pointer is not NULL. If either
71 check fails, the area parameter is ignored.
72 · If the checks succeed, ncurses also copies the return value to
74 the buffer pointed to by area, and the area value will be updat‐
75 ed to point past the null ending this value.
76 · The return value itself is an address in the terminal descrip‐
78 tion which is loaded into memory.
79 Only the first two characters of the id parameter of tgetflag, tgetnum
81 and tgetstr are compared in lookups.
82 FORMATTING CAPABILITIES
84 The tgoto routine expands the given capability using the parameters.
85 · Because the capability may have padding characters, the output of
87 tgoto should be passed to tputs rather than some other output func‐
88 tion such as printf.
89 · While tgoto is assumed to be used for the two-parameter cursor po‐
91 sitioning capability, termcap applications also use it for single-
92 parameter capabilities.
93 Doing this shows a quirk in tgoto: most hardware terminals use cur‐
95 sor addressing with row first, but the original developers of the
96 termcap interface chose to put the column parameter first. The
97 tgoto function swaps the order of parameters. It does this also
98 for calls requiring only a single parameter. In that case, the
99 first parameter is merely a placeholder.
100 · Normally the ncurses library is compiled with terminfo support. In
102 that case, tgoto uses tparm(3X) (a more capable formatter).
103 However, tparm is not a termcap feature, and portable termcap ap‐
105 plications should not rely upon its availability.
106 The tputs routine is described on the curs_terminfo(3X) manual page.
108 It can retrieve capabilities by either termcap or terminfo name.
109 GLOBAL VARIABLES
111 The variables PC, UP and BC are set by tgetent to the terminfo entry's
112 data for pad_char, cursor_up and backspace_if_not_bs, respectively. UP
113 is not used by ncurses. PC is used in the tdelay_output function. BC
114 is used in the tgoto emulation. The variable ospeed is set by ncurses
115 in a system-specific coding to reflect the terminal speed.
116
118 Except where explicitly noted, routines that return an integer return
119 ERR upon failure and OK (SVr4 only specifies "an integer value other
120 than ERR") upon successful completion.
121 Routines that return pointers return NULL on error.
123
125 If you call tgetstr to fetch ca or any other parameterized string, be
126 aware that it will be returned in terminfo notation, not the older and
127 not-quite-compatible termcap notation. This will not cause problems if
128 all you do with it is call tgoto or tparm, which both expand terminfo-
129 style strings as terminfo. (The tgoto function, if configured to sup‐
130 port termcap, will check if the string is indeed terminfo-style by
131 looking for "%p" parameters or "$<..>" delays, and invoke a termcap-
132 style parser if the string does not appear to be terminfo).
133 Because terminfo conventions for representing padding in string capa‐
135 bilities differ from termcap's, tputs("50"); will put out a literal
136 "50" rather than busy-waiting for 50 milliseconds. Cope with it.
137 Note that termcap has nothing analogous to terminfo's sgr string. One
139 consequence of this is that termcap applications assume me (terminfo
140 sgr0) does not reset the alternate character set. This implementation
141 checks for, and modifies the data shown to the termcap interface to ac‐
142 commodate termcap's limitation in this respect.
143
145 These functions are provided for supporting legacy applications, and
146 should not be used in new programs:
147 · The XSI Curses standard, Issue 4 describes these functions. Howev‐
149 er, they are marked TO BE WITHDRAWN and may be removed in future
150 versions.
151 · X/Open Curses, Issue 5 (December 2007) marked the termcap interface
153 (along with vwprintw and vwscanw) as withdrawn.
154 Neither the XSI Curses standard nor the SVr4 man pages documented the
156 return values of tgetent correctly, though all three were in fact re‐
157 turned ever since SVr1. In particular, an omission in the XSI Curses
158 documentation has been misinterpreted to mean that tgetent returns OK
159 or ERR. Because the purpose of these functions is to provide compati‐
160 bility with the termcap library, that is a defect in XCurses, Issue 4,
161 Version 2 rather than in ncurses.
162 External variables are provided for support of certain termcap applica‐
164 tions. However, termcap applications' use of those variables is poorly
165 documented, e.g., not distinguishing between input and output. In par‐
166 ticular, some applications are reported to declare and/or modify os‐
167 peed.
168 The comment that only the first two characters of the id parameter are
170 used escapes many application developers. The original BSD 4.2 termcap
171 library (and historical relics thereof) did not require a trailing null
172 NUL on the parameter name passed to tgetstr, tgetnum and tgetflag.
173 Some applications assume that the termcap interface does not require
174 the trailing NUL for the parameter name. Taking into account these is‐
175 sues:
176 · As a special case, tgetflag matched against a single-character
178 identifier provided that was at the end of the terminal descrip‐
179 tion. You should not rely upon this behavior in portable programs.
180 This implementation disallows matches against single-character ca‐
181 pability names.
182 · This implementation disallows matches by the termcap interface
184 against extended capability names which are longer than two charac‐
185 ters.
186
188 curses(3X), terminfo(5), term_variables(3X), putc(3).
189 https://invisible-island.net/ncurses/tctest.html
191 curs_termcap(3X)