1MakeMethods(3)        User Contributed Perl Documentation       MakeMethods(3)
2
3
4

NAME

6       Class::MakeMethods - Generate common types of methods
7

SYNOPSIS

9         # Generates methods for your object when you "use" it.
10         package MyObject;
11         use Class::MakeMethods::Standard::Hash (
12           'new'       => 'new',
13           'scalar'    => 'foo',
14           'scalar'    => 'bar',
15         );
16
17         # The generated methods can be called just like normal ones
18         my $obj = MyObject->new( foo => "Foozle", bar => "Bozzle" );
19         print $obj->foo();
20         $obj->bar("Barbados");
21

DESCRIPTION

23       The Class::MakeMethods framework allows Perl class developers to
24       quickly define common types of methods. When a module "use"s
25       Class::MakeMethods or one of its subclasses, it can select from a
26       variety of supported method types, and specify a name for each method
27       desired. The methods are dynamically generated and installed in the
28       calling package.
29
30       Construction of the individual methods is handled by subclasses.  This
31       delegation approach allows for a wide variety of method-generation
32       techniques to be supported, each by a different subclass. Subclasses
33       can also be added to provide support for new types of methods.
34
35       Over a dozen subclasses are available, including implementations of a
36       variety of different method-generation techniques. Each subclass
37       generates several types of methods, with some supporting their own
38       open-eneded extension syntax, for hundreds of possible combinations of
39       method types.
40

GETTING STARTED

42   Motivation
43         "Make easy things easier."
44
45       This module addresses a problem encountered in object-oriented
46       development wherein numerous methods are defined which differ only
47       slightly from each other.
48
49       A common example is accessor methods for hash-based object attributes,
50       which allow you to get and set the value $self->{'foo'} by calling a
51       method $self->foo().
52
53       These methods are generally quite simple, requiring only a couple of
54       lines of Perl, but in sufficient bulk, they can cut down on the
55       maintainability of large classes.
56
57       Class::MakeMethods allows you to simply declare those methods to be of
58       a predefined type, and it generates and installs the necessary methods
59       in your package at compile-time.
60
61   A Contrived Example
62       Object-oriented Perl code is widespread -- you've probably seen code
63       like the below a million times:
64
65         my $obj = MyStruct->new( foo=>"Foozle", bar=>"Bozzle" );
66         if ( $obj->foo() =~ /foo/i ) {
67           $obj->bar("Barbados!");
68         }
69         print $obj->summary();
70
71       (If this doesn't look familiar, take a moment to read perlboot and
72       you'll soon learn more than's good for you.)
73
74       Typically, this involves creating numerous subroutines that follow a
75       handful of common patterns, like constructor methods and accessor
76       methods. The classic example is accessor methods for hash-based object
77       attributes, which allow you to get and set the value self->{foo} by
78       calling a method self->foo().  These methods are generally quite
79       simple, requiring only a couple of lines of Perl, but in sufficient
80       bulk, they can cut down on the maintainability of large classes.
81
82       Here's a possible implementation for the class whose interface is shown
83       above:
84
85         package MyStruct;
86
87         sub new {
88           my $callee = shift;
89           my $self = bless { @_ }, (ref $callee || $callee);
90           return $self;
91         }
92
93         sub foo {
94           my $self = shift;
95           if ( scalar @_ ) {
96             $self->{'foo'} = shift();
97           } else {
98             $self->{'foo'}
99           }
100         }
101
102         sub bar {
103           my $self = shift;
104           if ( scalar @_ ) {
105             $self->{'bar'} = shift();
106           } else {
107             $self->{'bar'}
108           }
109         }
110
111         sub summary {
112           my $self = shift;
113           join(', ', map { "\u$_: " . $self->$_() } qw( foo bar ) )
114         }
115
116       Note in particular that the foo and bar methods are almost identical,
117       and that the new method could be used for almost any class; this is
118       precisely the type of redundancy Class::MakeMethods addresses.
119
120       Class::MakeMethods allows you to simply declare those methods to be of
121       a predefined type, and it generates and installs the necessary methods
122       in your package at compile-time.
123
124       Here's the equivalent declaration for that same basic class:
125
126         package MyStruct;
127         use Class::MakeMethods::Standard::Hash (
128           'new'       => 'new',
129           'scalar'    => 'foo',
130           'scalar'    => 'bar',
131         );
132
133         sub summary {
134           my $self = shift;
135           join(', ', map { "\u$_: " . $self->$_() } qw( foo bar ) )
136         }
137
138       This is the basic purpose of Class::MakeMethods: The "boring" pieces of
139       code have been replaced by succinct declarations, placing the focus on
140       the "unique" or "custom" pieces.
141
142   Finding the Method Types You Need
143       Once you've grasped the basic idea -- simplifying repetitive code by
144       generating and installing methods on demand -- the remaining complexity
145       basically boils down to figuring out which arguments to pass to
146       generate the specific methods you want.
147
148       Unfortunately, this is not a trivial task, as there are dozens of
149       different types of methods that can be generated, each with a variety
150       of options, and several alternative ways to write each method
151       declaration. You may prefer to start by just finding a few examples
152       that you can modify to accomplish your immediate needs, and defer
153       investigating all of the extras until you're ready to take a closer
154       look.
155
156   Other Documentation
157       The remainder of this document focuses on points of usage that are
158       common across all subclasses, and describes how to create your own
159       subclasses.
160
161       If this is your first exposure to Class::MakeMethods, you may want to
162       skim over the rest of this document, then take a look at the examples
163       and one or two of the method-generating subclasses to get a more
164       concrete sense of typical usage, before returning to the details
165       presented below.
166
167       ·   A collection of sample uses is available in
168           Class::MakeMethods::Docs::Examples.
169
170       ·   Some of the most common object and class methods are available from
171           Class::MakeMethods::Standard::Hash,
172           Class::MakeMethods::Standard::Global and
173           Class::MakeMethods::Standard::Universal.
174
175       ·   If you need a bit more flexibility, see
176           Class::MakeMethods::Composite for method generators which offer
177           more customization options, including pre- and post-method callback
178           hooks.
179
180       ·   For the largest collection of methods and options, see
181           Class::MakeMethods::Template, which uses a system of dynamic code
182           generation to allow endless variation.
183
184       ·   A listing of available method types from each of the different
185           subclasses is provided in Class::MakeMethods::Docs::Catalog.
186

CLASS ARCHITECTURE

188       Because there are so many common types of methods one might wish to
189       generate, the Class::MakeMethods framework provides an extensible
190       system based on subclasses.
191
192       When your code requests a method, the MakeMethods base class performs
193       some standard argument parsing, delegates the construction of the
194       actual method to the appropriate subclass, and then installs whatever
195       method the subclass returns.
196
197   The MakeMethods Base Class
198       The Class::MakeMethods package defines a superclass for method-
199       generating modules, and provides a calling convention, on-the-fly
200       subclass loading, and subroutine installation that will be shared by
201       all subclasses.
202
203       The superclass also lets you generate several different types of
204       methods in a single call, and will automatically load named subclasses
205       the first time they're used.
206
207   The Method Generator Subclasses
208       The type of method that gets created is controlled by the specific
209       subclass and generator function you request. For example,
210       "Class::MakeMethods::Standard::Hash" has a generator function
211       "scalar()", which is responsible for generating simple scalar-accessor
212       methods for blessed-hash objects.
213
214       Each generator function specified is passed the arguments specifying
215       the method the caller wants, and produces a closure or eval-able
216       sequence of Perl statements representing the ready-to-install function.
217
218   Included Subclasses
219       Because each subclass defines its own set of method types and
220       customization options, a key step is to find your way to the
221       appropriate subclasses.
222
223       Standard (See Class::MakeMethods::Standard.)
224           Generally you will want to begin with the Standard::Hash subclass,
225           to create constructor and accessor methods for working with
226           blessed-hash objects (or you might choose the Standard::Array
227           subclass instead).  The Standard::Global subclass provides methods
228           for class data shared by all objects in a class.
229
230           Each Standard method declaration can optionally include a hash of
231           associated parameters, which allows you to tweak some of the
232           characteristics of the methods. Subroutines are bound as closures
233           to a hash of each method's name and parameters. Standard::Hash and
234           Standard::Array provide object constructor and accessors. The
235           Standard::Global provides for static data shared by all instances
236           and subclasses, while the data for Standard::Inheritable methods
237           trace the inheritance tree to find values, and can be overriden for
238           any subclass or instance.
239
240       Composite (See Class::MakeMethods::Composite.)
241           For additional customization options, check out the Composite
242           subclasses, which allow you to select from a more varied set of
243           implementations and which allow you to adjust any specific method
244           by adding your own code-refs to be run before or after it.
245
246           Subroutines are bound as closures to a hash of each method's name
247           and optional additional data, and to one or more subroutine
248           references which make up the composite behavior of the method.
249           Composite::Hash and Composite::Array provide object constructor and
250           accessors. The Composite::Global provides for static data shared by
251           all instances and subclasses, while the data for
252           Composite::Inheritable methods can be overriden for any subclass or
253           instance.
254
255       Template (See Class::MakeMethods::Template.)
256           The Template subclasses provide an open-ended structure for objects
257           that assemble Perl code on the fly into cachable closure-generating
258           subroutines; if the method you need isn't included, you can extend
259           existing methods by re-defining just the snippet of code that's
260           different.
261
262           Class::MakeMethods::Template extends MakeMethods with a text
263           templating system that can assemble Perl code fragments into a
264           desired subroutine. The code for generated methods is eval'd once
265           for each type, and then repeatedly bound as closures to method-
266           specific data for better performance.
267
268           Templates for dozens of types of constructor, accessor, and mutator
269           methods are included, ranging from from the mundane (constructors
270           and value accessors for hash and array slots) to the esoteric
271           (inheritable class data and "inside-out" accessors with external
272           indexes).
273
274       Basic (See Class::MakeMethods::Basic.)
275           The Basic subclasses provide stripped down method generators with
276           no configurable options, for minimal functionality (and minimum
277           overhead).
278
279           Subroutines are bound as closures to the name of each method.
280           Basic::Hash and Basic::Array provide simple object constructors and
281           accessors. Basic::Global provides basic global-data accessors.
282
283       Emulators (See Class::MakeMethods::Emulator.)
284           In several cases, Class::MakeMethods provides functionality closely
285           equivalent to that of an existing module, and it is simple to map
286           the existing module's interface to that of Class::MakeMethods.
287
288           Emulators are included for Class::MethodMaker,
289           Class::Accessor::Fast, Class::Data::Inheritable, Class::Singleton,
290           and Class::Struct, each of which passes the original module's test
291           suite, usually requiring only that the name of the module be
292           changed.
293
294       Extending
295           Class::MakeMethods can be extended by creating subclasses that
296           define additional method-generation functions. Callers can then
297           specify the name of your subclass and generator function in their
298           "use Call::MakeMethods ..." statements and your function will be
299           invoked to produce the required closures. See "EXTENDING" for more
300           information.
301
302   Naming Convention for Generated Method Types
303       Method generation functions in this document are often referred to
304       using the 'MakerClass:MethodType' or
305       'MakerGroup::MakerSubclass:MethodType' naming conventions. As you will
306       see, these are simply the names of Perl packages and the names of
307       functions that are contained in those packages.
308
309       The included subclasses are grouped into several major groups, so the
310       names used by the included subclasses and method types reflect three
311       axes of variation, "Group::Subclass:Type":
312
313       Maker Group
314           Each group shares a similar style of technical implementation and
315           level of complexity. For example, the "Standard::*" packages are
316           all simple, while the "Composite::*" packages all support pre- and
317           post-conditions.
318
319           (For a listing of the four main groups of included subclasses, see
320           "Included Subclasses"" in ".)
321
322       Maker Subclass
323           Each subclass generates methods for a similar level of scoping or
324           underlying object type. For example, the *::Hash packages all make
325           methods for objects based on blessed hashes, while the *::Global
326           packages make methods that access class-wide data that will be
327           shared between all objects in a class.
328
329       Method Type
330           Each method type produces a similar type of constructor or
331           accessor. For examples, the *:new methods are all constructors,
332           while the "::scalar" methods are all accessors that allow you to
333           get and set a single scalar value.
334
335       Bearing that in mind, you should be able to guess the intent of many of
336       the method types based on their names alone; when you see
337       "Standard::Hash:scalar" you can read it as "a type of method to access
338       a scalar value stored in a hash-based object, with a standard
339       implementation style" and know that it's going to call the scalar()
340       function in the Class::MakeMethods::Standard::Hash package to generate
341       the requested method.
342

USAGE

344       The supported method types, and the kinds of arguments they expect,
345       vary from subclass to subclass; see the documentation of each subclass
346       for details.
347
348       However, the features described below are applicable to all subclasses.
349
350   Invocation
351       Methods are dynamically generated and installed into the calling
352       package when you "use Class::MakeMethods (...)" or one of its
353       subclasses, or if you later call "Class::MakeMethods->make(...)".
354
355       The arguments to "use" or "make" should be pairs of a generator type
356       name and an associated array of method-name arguments to pass to the
357       generator.
358
359       ·   use Class::MakeMethods::MakerClass (
360               'MethodType' => [ Arguments ], ...
361             );
362
363       ·   Class::MakeMethods::MakerClass->make (
364               'MethodType' => [ Arguments ], ...
365             );
366
367       You may select a specific subclass of Class::MakeMethods for a single
368       generator-type/argument pair by prefixing the type name with a subclass
369       name and a colon.
370
371       ·   use Class::MakeMethods (
372               'MakerClass:MethodType' => [ Arguments ], ...
373             );
374
375       ·   Class::MakeMethods->make (
376               'MakerClass:MethodType' => [ Arguments ], ...
377             );
378
379       The difference between "use" and "make" is primarily one of precedence;
380       the "use" keyword acts as a BEGIN block, and is thus evaluated before
381       "make" would be. (See "About Precedence" for additional discussion of
382       this issue.)
383
384   Alternative Invocation
385       If you want methods to be declared at run-time when a previously-
386       unknown method is invoked, see Class::MakeMethods::Autoload.
387
388       ·   use Class::MakeMethods::Autoload 'MakerClass:MethodType';
389
390       If you are using Perl version 5.6 or later, see
391       Class::MakeMethods::Attribute for an additional declaration syntax for
392       generated methods.
393
394       ·   use Class::MakeMethods::Attribute 'MakerClass';
395
396           sub name :MakeMethod('MethodType' => Arguments);
397
398   Mixing Method Types
399       A single calling class can combine generated methods from different
400       MakeMethods subclasses. In general, the only mixing that's problematic
401       is combinations of methods which depend on different underlying object
402       types, like using *::Hash and *::Array methods together -- the methods
403       will be generated, but some of them  are guaranteed to fail when
404       called, depending on whether your object happens to be a blessed
405       hashref or arrayref.
406
407       For example, it's common to mix and match various *::Hash methods, with
408       a scattering of Global or Inheritable methods:
409
410         use Class::MakeMethods (
411           'Basic::Hash:scalar'      => 'foo',
412           'Composite::Hash:scalar'  => [ 'bar' => { post_rules => [] } ],
413           'Standard::Global:scalar' => 'our_shared_baz'
414         );
415
416   Argument Normalization
417       The following expansion rules are applied to argument pairs to enable
418       the use of simple strings instead of arrays of arguments.
419
420       ·   Each type can be followed by a single meta-method definition, or by
421           a reference to an array of them.
422
423       ·   If the argument is provided as a string containing spaces, it is
424           split and each word is treated as a separate argument.
425
426       ·   It the meta-method type string contains spaces, it is split and
427           only the first word is used as the type, while the remaining words
428           are placed at the front of the argument list.
429
430       For example, the following statements are equivalent ways of declaring
431       a pair of Basic::Hash scalar methods named 'foo' and 'bar':
432
433         use Class::MakeMethods::Basic::Hash (
434           'scalar' => [ 'foo', 'bar' ],
435         );
436
437         use Class::MakeMethods::Basic::Hash (
438           'scalar' => 'foo',
439           'scalar' => 'bar',
440         );
441
442         use Class::MakeMethods::Basic::Hash (
443           'scalar' => 'foo bar',
444         );
445
446         use Class::MakeMethods::Basic::Hash (
447           'scalar foo' => 'bar',
448         );
449
450       (The last of these is clearly a bit peculiar and potentially misleading
451       if used as shown, but it enables advanced subclasses to provide
452       convenient formatting for declarations with  defaults or modifiers,
453       such as 'Template::Hash:scalar --private' => 'foo', discussed
454       elsewhere.)
455
456   Global Parameters
457       Global parameters may be specified as an argument pair with a leading
458       hyphen. (This distinguishes them from type names, which must be valid
459       Perl subroutine names, and thus will never begin with a hyphen.)
460
461       use Class::MakeMethods::MakerClass (
462           '-Param' => ParamValue,
463           'MethodType' => [ Arguments ], ...
464         );
465
466       Parameter settings apply to all subsequent method declarations within a
467       single "use" or "make" call.
468
469       The below parameters allow you to control generation and installation
470       of the requested methods. (Some subclasses may support additional
471       parameters; see their documentation for details.)
472
473       -TargetClass
474           By default, the methods are installed in the first package in the
475           caller() stack that is not a Class::MakeMethods subclass; this is
476           generally the package in which your use or make statement was
477           issued. To override this you can pass "-TargetClass => package" as
478           initial arguments to "use" or "make".
479
480           This allows you to construct or modify classes "from the outside":
481
482             package main;
483
484             use Class::MakeMethods::Basic::Hash(
485               -TargetClass => 'MyWidget',
486               'new' => ['create'],
487               'scalar' => ['foo', 'bar'],
488             );
489
490             $o = MyWidget->new( foo => 'Foozle' );
491             print $o->foo();
492
493       -MakerClass
494           By default, meta-methods are looked up in the package you called
495           use or make on.
496
497           You can override this by passing the "-MakerClass" flag, which
498           allows you to switch packages for the remainder of the meta-method
499           types and arguments.
500
501           use Class::MakeMethods (
502               '-MakerClass'=>'MakerClass',
503               'MethodType' => [ Arguments ]
504             );
505
506           When specifying the MakerClass, you may provide either the trailing
507           part name of a subclass inside of the "Class::MakeMethods::"
508           namespace, or a full package name prefixed by "::".
509
510           For example, the following four statements are equivalent ways of
511           declaring a Basic::Hash scalar method named 'foo':
512
513             use Class::MakeMethods::Basic::Hash (
514               'scalar' => [ 'foo' ]
515             );
516
517             use Class::MakeMethods (
518               'Basic::Hash:scalar' => [ 'foo' ]
519             );
520
521             use Class::MakeMethods (
522               '-MakerClass'=>'Basic::Hash',
523               'scalar' =>  [ 'foo' ]
524             );
525
526             use Class::MakeMethods (
527               '-MakerClass'=>'::Class::MakeMethods::Basic::Hash',
528               'scalar' =>  [ 'foo' ]
529             );
530
531       -ForceInstall
532           By default, Class::MakeMethods will not install generated methods
533           over any pre-existing methods in the target class. To override this
534           you can pass "-ForceInstall => 1" as initial arguments to "use" or
535           "make".
536
537           Note that the "use" keyword acts as a BEGIN block, so a "use" at
538           the top of a file will be executed before any subroutine
539           declarations later in the file have been seen. (See "About
540           Precedence" for additional discussion of this issue.)
541
542   About Precedence
543       Rather than passing the method declaration arguments when you "use" one
544       of these packages, you may instead pass them to a subsequent call to
545       the class method "make".
546
547       The difference between "use" and "make" is primarily one of precedence;
548       the "use" keyword acts as a BEGIN block, and is thus evaluated before
549       "make" would be. In particular, a "use" at the top of a file will be
550       executed before any subroutine declarations later in the file have been
551       seen, whereas a "make" at the same point in the file will not.
552
553       By default, Class::MakeMethods will not install generated methods over
554       any pre-existing methods in the target class. To override this you can
555       pass "-ForceInstall => 1" as initial arguments to "use" or "make".
556
557       If the same method is declared multiple times, earlier calls to "use"
558       or "make()" win over later ones, but within each call, later
559       declarations superceed earlier ones.
560
561       Here are some examples of the results of these precedence rules:
562
563       # 1 - use, before
564         use Class::MakeMethods::Standard::Hash (
565           'scalar'=>['baz'] # baz() not seen yet, so we generate, install
566         );
567         sub baz { 1 } # Subsequent declaration overwrites it, with warning
568
569         # 2 - use, after
570         sub foo { 1 }
571         use Class::MakeMethods::Standard::Hash (
572           'scalar'=>['foo'] # foo() is already declared, so has no effect
573         );
574
575         # 3 - use, after, Force
576         sub bar { 1 }
577         use Class::MakeMethods::Standard::Hash (
578             -ForceInstall => 1, # Set flag for following methods...
579           'scalar' => ['bar']   # ... now overwrites pre-existing bar()
580         );
581
582         # 4 - make, before
583         Class::MakeMethods::Standard::Hash->make(
584           'scalar'=>['blip'] # blip() is already declared, so has no effect
585         );
586         sub blip { 1 } # Although lower than make(), this "happens" first
587
588         # 5 - make, after, Force
589         sub ping { 1 }
590         Class::MakeMethods::Standard::Hash->make(
591             -ForceInstall => 1, # Set flag for following methods...
592           'scalar' => ['ping']  # ... now overwrites pre-existing ping()
593         );
594
595   Diagnostic Messages
596       The following warnings and errors may be produced when using
597       Class::MakeMethods to generate methods. (Note that this list does not
598       include run-time messages produced by calling the generated methods.)
599
600       These messages are classified as follows (listed in increasing order of
601       desperation):
602
603           (Q) A debugging message, only shown if $CONTEXT{Debug} is true
604           (W) A warning.
605           (D) A deprecation.
606           (F) A fatal error in caller's use of the module.
607           (I) An internal problem with the module or subclasses.
608
609       Portions of the message which may vary are denoted with a %s.
610
611       Can't interpret meta-method template: argument is empty or undefined
612           (F)
613
614       Can't interpret meta-method template: unknown template name '%s'
615           (F)
616
617       Can't interpret meta-method template: unsupported template type '%s'
618           (F)
619
620       Can't make method %s(): template specifies unknown behavior '%s'
621           (F)
622
623       Can't parse meta-method declaration: argument is empty or undefined
624           (F) You passed an undefined value or an empty string in the list of
625           meta-method declarations to use or make.
626
627       Can't parse meta-method declaration: missing name attribute.
628           (F) You included an hash-ref-style meta-method declaration that did
629           not include the required name attribute. You may have meant this to
630           be an attributes hash for a previously specified name, but if so we
631           were unable to locate it.
632
633       Can't parse meta-method declaration: unknown template name '%s'
634           (F) You included a template specifier of the form '-template_name'
635           in a the list of meta-method declaration, but that template is not
636           available.
637
638       Can't parse meta-method declaration: unsupported declaration type '%s'
639           (F) You included an unsupported type of value in a list of meta-
640           method declarations.
641
642       Compilation error: %s
643           (I)
644
645       Not an interpretable meta-method: '%s'
646           (I)
647
648       Odd number of arguments passed to %s make
649           (F) You specified an odd number of arguments in a call to use or
650           make.  The arguments should be key => value pairs.
651
652       Unable to compile generated method %s(): %s
653           (I) The install_methods subroutine attempted to compile a
654           subroutine by calling eval on a provided string, which failed for
655           the indicated reason, usually some type of Perl syntax error.
656
657       Unable to dynamically load $package: $%s
658           (F)
659
660       Unable to install code for %s() method: '%s'
661           (I) The install_methods subroutine was passed an unsupported value
662           as the code to install for the named method.
663
664       Unexpected return value from compilation of %s(): '%s'
665           (I) The install_methods subroutine attempted to compile a
666           subroutine by calling eval on a provided string, but the eval
667           returned something other than than the code ref we expect.
668
669       Unexpected return value from meta-method constructor %s: %s
670           (I) The requested method-generator was invoked, but it returned an
671           unacceptable value.
672

EXTENDING

674       Class::MakeMethods can be extended by creating subclasses that define
675       additional meta-method types. Callers then select your subclass using
676       any of the several techniques described above.
677
678   Creating A Subclass
679       The begining of a typical extension might look like the below:
680
681         package My::UpperCaseMethods;
682         use strict;
683         use Class::MakeMethods '-isasubclass';
684
685         sub my_method_type { ... }
686
687       You can name your subclass anything you want; it does not need to begin
688       with Class::MakeMethods.
689
690       The '-isasubclass' flag is a shortcut that automatically puts
691       Class::MakeMethods into your package's @ISA array so that it will
692       inherit the import() and make() class methods. If you omit this flag,
693       you will need to place the superclass in your @ISA explicitly.
694
695       Typically, the subclass should not inherit from Exporter; both
696       Class::MakeMethods and Exporter are based on inheriting an import class
697       method, and getting a subclass to support both would require additional
698       effort.
699
700   Naming Method Types
701       Each type of method that can be generated is defined in a subroutine of
702       the same name. You can give your meta-method type any name that is a
703       legal subroutine identifier.
704
705       (Names begining with an underscore, and the names "import" and "make",
706       are reserved for internal use by Class::MakeMethods.)
707
708       If you plan on distributing your extension, you may wish to follow the
709       "Naming Convention for Generated Method Types" described above to
710       facilitate reuse by others.
711
712   Implementation Options
713       Each method generation subroutine can be implemented in any one of the
714       following ways:
715
716       ·   Subroutine Generation
717
718           Returns a list of subroutine name/code pairs.
719
720           The code returned may either be a coderef, or a string containing
721           Perl code that can be evaled and will return a coderef. If the eval
722           fails, or anything other than a coderef is returned, then
723           Class::MakeMethods croaks.
724
725           For example a simple sub-class with a method type
726           upper_case_get_set that generates an accessor method for each
727           argument provided might look like this:
728
729             package My::UpperCaseMethods;
730             use Class::MakeMethods '-isasubclass';
731
732             sub uc_scalar {
733               my $class = shift;
734               map {
735                 my $name = $_;
736                 $name => sub {
737                   my $self = shift;
738                   if ( scalar @_ ) {
739                     $self->{ $name } = uc( shift )
740                   } else {
741                     $self->{ $name };
742                   }
743                 }
744               } @_;
745             }
746
747           Callers could then generate these methods as follows:
748
749             use My::UpperCaseMethods ( 'uc_scalar' => 'foo' );
750
751       ·   Aliasing
752
753           Returns a string containing a different meta-method type to use for
754           those same arguments.
755
756           For example a simple sub-class that defines a method type
757           stored_value might look like this:
758
759             package My::UpperCaseMethods;
760             use Class::MakeMethods '-isasubclass';
761
762             sub regular_scalar { return 'Basic::Hash:scalar' }
763
764           And here's an example usage:
765
766             use My::UpperCaseMethods ( 'regular_scalar' => [ 'foo' ] );
767
768       ·   Rewriting
769
770           Returns one or more array references with different meta-method
771           types and arguments to use.
772
773           For example, the below meta-method definition reviews the name of
774           each method it's passed and creates different types of meta-methods
775           based on whether the declared name is in all upper case:
776
777             package My::UpperCaseMethods;
778             use Class::MakeMethods '-isasubclass';
779
780             sub auto_detect {
781               my $class = shift;
782               my @rewrite = ( [ 'Basic::Hash:scalar' ],
783                               [ '::My::UpperCaseMethods:uc_scalar' ] );
784               foreach ( @_ ) {
785                 my $name_is_uppercase = ( $_ eq uc($_) ) ? 1 : 0;
786                 push @{ $rewrite[ $name_is_uppercase ] }, $_
787               }
788               return @rewrite;
789             }
790
791           The following invocation would then generate a regular scalar
792           accessor method foo, and a uc_scalar method BAR:
793
794             use My::UpperCaseMethods ( 'auto_detect' => [ 'foo', 'BAR' ] );
795
796       ·   Generator Object
797
798           Returns an object with a method named make_methods which will be
799           responsible for returning subroutine name/code pairs.
800
801           See Class::MakeMethods::Template for an example.
802
803       ·   Self-Contained
804
805           Your code may do whatever it wishes, and return an empty list.
806
807   Access to Parameters
808       Global parameter values are available through the _context() class
809       method at the time that method generation is being performed.
810
811         package My::Maker;
812         sub my_methodtype {
813           my $class = shift;
814           warn "Installing in " . $class->_context('TargetClass');
815           ...
816         }
817
818       ·   TargetClass
819
820           Class into which code should be installed.
821
822       ·   MakerClass
823
824           Which subclass of Class::MakeMethods will generate the methods?
825
826       ·   ForceInstall
827
828           Controls whether generated methods will be installed over pre-
829           existing methods in the target package.
830

SEE ALSO

832   Package Documentation
833       A collection of sample uses is available in
834       Class::MakeMethods::Docs::Examples.
835
836       See the documentation for each family of subclasses:
837
838       ·   Class::MakeMethods::Basic
839
840       ·   Class::MakeMethods::Standard
841
842       ·   Class::MakeMethods::Composite
843
844       ·   Class::MakeMethods::Template
845
846       A listing of available method types from each of the different
847       subclasses is provided in Class::MakeMethods::Docs::Catalog.
848
849   Related Modules
850       For a brief survey of the numerous modules on CPAN which offer some
851       type of method generation, see
852       Class::MakeMethods::Docs::RelatedModules.
853
854       If you have used Class::MethodMaker, you will note numerous
855       similarities.  Class::MakeMethods is based on Class::MethodMaker, but
856       has been substantially revised in order to provide a range of new
857       features.  Backward compatibility and conversion documentation is
858       provded in Class::MakeMethods::Emulator::MethodMaker.
859
860       In several cases, Class::MakeMethods provides functionality closely
861       equivalent to that of an existing module, and emulator modules are
862       provided to map the existing module's interface to that of
863       Class::MakeMethods.  See Class::MakeMethods::Emulator for more
864       information.
865
866   Perl Docs
867       See perlboot for a quick introduction to objects for beginners.  For an
868       extensive discussion of various approaches to class construction, see
869       perltoot and perltootc (called perltootc in the most recent versions of
870       Perl).
871
872       See "Making References" in perlref, point 4 for more information on
873       closures. (FWIW, I think there's a big opportunity for a "perlfunt"
874       podfile bundled with Perl in the tradition of "perlboot" and
875       "perltoot", exploring the utility of function references, callbacks,
876       closures, and continuations... There are a bunch of useful references
877       available, but not a good overview of how they all interact in a
878       Perlish way.)
879

BUGS AND SUPPORT

881   Release Status
882       This module has been used in a variety of production systems and has
883       been available on CPAN for over two years, with several other
884       distributions dependant on it, so it would be fair to say that it is
885       fully released.
886
887       However, while some portions are well tested, others are less so, and
888       new bug reports do trickle in occasionally. If you do encounter any
889       problems, please inform the author and I'll endeavor to patch them
890       promptly.
891
892       Additional features have been outlined for future development, but the
893       intent is support these by adding more options to the declaration
894       interface, while maintaining backward compatibility.
895
896   Known Problems
897       It does not appear to be possible to assign subroutine names to
898       closures within Perl. As a result, debugging output from Carp and
899       similar sources will show all generated methods as "ANON()" rather than
900       "YourClass::methodname()".
901
902       See Class::MakeMethods::Docs::ToDo for other outstanding issues and
903       development plans.
904
905   Support
906       If you have questions or feedback about this module, please feel free
907       to contact the author at the below address. Although there is no formal
908       support program, I do attempt to answer email promptly.
909
910       I would be particularly interested in any suggestions towards improving
911       the documentation, correcting any Perl-version or platform
912       dependencies, as well as general feedback and suggested additions.
913
914       Bug reports that contain a failing test case are greatly appreciated,
915       and suggested patches will be promptly considered for inclusion in
916       future releases.
917
918       To report bugs via the CPAN web tracking system, go to
919       "http://rt.cpan.org/NoAuth/Bugs.html?Dist=Class-MakeMethods" or send
920       mail to "Dist=Class-MakeMethods#rt.cpan.org", replacing "#" with "@".
921
922   Community
923       If you've found this module useful or have feedback about your
924       experience with it, consider sharing your opinion with other Perl users
925       by posting your comment to CPAN's ratings system:
926
927       · http://cpanratings.perl.org/rate/?distribution=Class-MakeMethods
928
929       For more general discussion, you may wish to post a message on
930       PerlMonks or the comp.lang.perl.misc newsgroup:
931
932       · http://www.perlmonks.org/index.pl?node=Seekers%20of%20Perl%20Wisdom
933
934       · http://groups.google.com/groups?group=comp.lang.perl.misc
935

DISTRIBUTION AND INSTALLATION

937   Version
938       This is Class::MakeMethods v1.009, intended for general use.
939
940       This module's CPAN registration should read:
941
942         Name            DSLIP  Description
943         --------------  -----  ---------------------------------------------
944         Class::
945         ::MakeMethods   RdpOp  Generate common types of methods
946
947   Prerequisites
948       In general, this module should work with Perl 5.003 or later, without
949       requring any modules beyond the core Perl distribution.
950
951       The following optional feature may not be available on some platforms:
952
953       ·   Class::MakeMethods::Attribute: The ":MakeMethod" subroutine
954           attribute requires Perl version 5.6 and the Attribute::Handlers
955           module (from CPAN).
956
957       ·   Class::MakeMethods::Template "--lvalue": The lvalue modifier
958           provided by the Template generator subclasses will only work on
959           Perl version 5.6 or later.
960
961   Installation
962       You should be able to install this module using the CPAN shell
963       interface:
964
965         perl -MCPAN -e 'install Class::MakeMethods'
966
967       Alternately, you may retrieve this package from CPAN or from the
968       author's site:
969
970       · http://search.cpan.org/~evo/
971
972       · http://www.cpan.org/modules/by-authors/id/E/EV/EVO
973
974       · http://www.evoscript.org/Class-MakeMethods/dist/
975
976       After downloading the distribution, follow the normal procedure to
977       unpack and install it, using the commands shown below or their local
978       equivalents on your system:
979
980         tar xzf Class-MakeMethods-*.tar.gz
981         cd Class-MakeMethods-*
982         perl Makefile.PL
983         make test && sudo make install
984
985       Thanks to the kind generosity of other members of the Perl community,
986       this distribution is also available repackaged in the FreeBSD "ports"
987       and Linux RPM formats. This may simplify installation for some users,
988       but be aware that these alternate distributions may lag a few versions
989       behind the latest release on CPAN.
990
991       · http://www.freebsd.org/cgi/ports.cgi?query=Class-MakeMethods
992
993       · http://www.rpmfind.net/linux/rpm2html/search.php?query=perl-Class-MakeMethods
994
995   Tested Platforms
996       This release has been tested succesfully on the following platforms:
997
998         5.6.1 on darwin
999
1000       Earlier releases have also tested OK on the following platforms:
1001
1002         IP30-R12000-irix
1003         OpenBSD.i386-openbsd
1004         i386-freebsd / i386-freebsd-thread-multi
1005         i386-linux
1006         i386-netbsd / i386-netbsd-thread-multi
1007         i586-linux / i586-linux-thread-multi-ld
1008         i686-linux / i686-pld-linux-thread-multi
1009         ia64-linux
1010         ppc-linux
1011         sparc-linux
1012         sparc-netbsd
1013         sun4-solaris
1014
1015       Some earlier versions failed to "make test" on MSWin32, although a
1016       forced installation would still work; that problem should be fixed in
1017       the most recent releases.
1018
1019       You may also review the current test results from CPAN-Testers:
1020
1021       · http://testers.cpan.org/show/Class-MakeMethods.html
1022
1024   Author
1025       Developed by Matthew Simon Cavalletto at Evolution Softworks.  More
1026       free Perl software is available at "www.evoscript.org".
1027
1028       You may contact the author directly at "evo@cpan.org" or
1029       "simonm@cavalletto.org".
1030
1031   Feedback and Suggestions
1032       Thanks to the following people for bug reports, suggestions, and other
1033       feedback:
1034
1035         Martyn J. Pearce
1036         Scott R. Godin
1037         Ron Savage
1038         Jay Lawrence
1039         Adam Spiers
1040         Malcolm Cook
1041         Terrence Brannon
1042         Jared Rhine
1043         Peter Chen
1044         Mike Castle
1045
1046   Source Material
1047       This package was inspired by the ground-breaking original closure-
1048       generating method maker module:
1049
1050         Class::MethodMaker, by Peter Seibel.
1051
1052       Additional inspiration, cool tricks, and blocks of useful code for this
1053       module were extracted from the following CPAN modules:
1054
1055         Class::Accessor, by Michael G Schwern
1056         Class::Contract, by Damian Conway
1057         Class::SelfMethods, by Toby Everett
1058
1059   Copyright
1060       Copyright 2002, 2003 Matthew Simon Cavalletto.
1061
1062       Portions copyright 1998, 1999, 2000, 2001 Evolution Online Systems,
1063       Inc.
1064
1065       Based on Class::MethodMaker, originally developed by Peter Seibel.
1066       Portions Copyright 1996 Organic Online. Portions Copyright 2000 Martyn
1067       J. Pearce.
1068
1069       Class::MakeMethods::Emulator::accessors is based on accessors. Portions
1070       by Steve Purkis.
1071
1072       Class::MakeMethods::Emulator::AccessorFast is based on
1073       Class::Accessor::Fast. Portions Copyright 2000 Michael G Schwern.
1074
1075       Class::MakeMethods::Emulator::Inheritable is based on
1076       Class::Data::Inheritable. Portions Copyright 2000 Damian Conway and
1077       Michael G Schwern.
1078
1079       Class::MakeMethods::Emulator::mcoder is based on mcoder. Portions
1080       Copyright 2003 by Salvador Fandiño.
1081
1082       Class::MakeMethods::Emulator::Singleton is based on Class::Singleton,
1083       by Andy Wardley. Portions Copyright 1998 Canon Research Centre Europe
1084       Ltd.
1085
1086       Class::MakeMethods::Utility::Ref is based on Ref.pm. Portions Copyright
1087       1994 David Muir Sharnoff.
1088
1089   License
1090       You may use, modify, and distribute this software under the same terms
1091       as Perl.
1092

POD ERRORS

1094       Hey! The above document had some coding errors, which are explained
1095       below:
1096
1097       Around line 1582:
1098           Non-ASCII character seen before =encoding in 'Fandiño.'. Assuming
1099           CP1252
1100
1101
1102
1103perl v5.30.1                      2020-01-29                    MakeMethods(3)
Impressum