1DBI::Profile(3) User Contributed Perl Documentation DBI::Profile(3)
2
6 DBI::Profile - Performance profiling and benchmarking for the DBI
7
9 The easiest way to enable DBI profiling is to set the DBI_PROFILE
10 environment variable to 2 and then run your code as usual:
11 DBI_PROFILE=2 prog.pl
13 This will profile your program and then output a textual summary
15 grouped by query when the program exits. You can also enable profiling
16 by setting the Profile attribute of any DBI handle:
17 $dbh->{Profile} = 2;
19 Then the summary will be printed when the handle is destroyed.
21 Many other values apart from are possible - see "ENABLING A PROFILE"
23 below.
24
26 The DBI::Profile module provides a simple interface to collect and
27 report performance and benchmarking data from the DBI.
28 For a more elaborate interface, suitable for larger programs, see
30 DBI::ProfileDumper and dbiprof. For Apache/mod_perl applications see
31 DBI::ProfileDumper::Apache.
32
34 Performance data collection for the DBI is built around several
35 concepts which are important to understand clearly.
36 Method Dispatch
38 Every method call on a DBI handle passes through a single
39 'dispatch' function which manages all the common aspects of DBI
40 method calls, such as handling the RaiseError attribute.
41 Data Collection
43 If profiling is enabled for a handle then the dispatch code takes a
44 high-resolution timestamp soon after it is entered. Then, after
45 calling the appropriate method and just before returning, it takes
46 another high-resolution timestamp and calls a function to record
47 the information. That function is passed the two timestamps plus
48 the DBI handle and the name of the method that was called. That
49 data about a single DBI method call is called a profile sample.
50 Data Filtering
52 If the method call was invoked by the DBI or by a driver then the
53 call is ignored for profiling because the time spent will be
54 accounted for by the original 'outermost' call for your code.
55 For example, the calls that the selectrow_arrayref() method makes
57 to prepare() and execute() etc. are not counted individually
58 because the time spent in those methods is going to be allocated to
59 the selectrow_arrayref() method when it returns. If this was not
60 done then it would be very easy to double count time spent inside
61 the DBI.
62 Data Storage Tree
64 The profile data is accumulated as 'leaves on a tree'. The 'path'
65 through the branches of the tree to a particular leaf is determined
66 dynamically for each sample. This is a key feature of DBI
67 profiling.
68 For each profiled method call the DBI walks along the Path and uses
70 each value in the Path to step into and grow the Data tree.
71 For example, if the Path is
73 [ 'foo', 'bar', 'baz' ]
75 then the new profile sample data will be merged into the tree at
77 $h->{Profile}->{Data}->{foo}->{bar}->{baz}
79 But it's not very useful to merge all the call data into one leaf
81 node (except to get an overall 'time spent inside the DBI' total).
82 It's more common to want the Path to include dynamic values such as
83 the current statement text and/or the name of the method called to
84 show what the time spent inside the DBI was for.
85 The Path can contain some 'magic cookie' values that are
87 automatically replaced by corresponding dynamic values when they're
88 used. These magic cookies always start with a punctuation
89 character.
90 For example a value of '"!MethodName"' in the Path causes the
92 corresponding entry in the Data to be the name of the method that
93 was called. For example, if the Path was:
94 [ 'foo', '!MethodName', 'bar' ]
96 and the selectall_arrayref() method was called, then the profile
98 sample data for that call will be merged into the tree at:
99 $h->{Profile}->{Data}->{foo}->{selectall_arrayref}->{bar}
101 Profile Data
103 Profile data is stored at the 'leaves' of the tree as references to
104 an array of numeric values. For example:
105 [
107 106, # 0: count of samples at this node
108 0.0312958955764771, # 1: total duration
109 0.000490069389343262, # 2: first duration
110 0.000176072120666504, # 3: shortest duration
111 0.00140702724456787, # 4: longest duration
112 1023115819.83019, # 5: time of first sample
113 1023115819.86576, # 6: time of last sample
114 ]
115 After the first sample, later samples always update elements 0, 1,
117 and 6, and may update 3 or 4 depending on the duration of the
118 sampled call.
119
121 Profiling is enabled for a handle by assigning to the Profile
122 attribute. For example:
123 $h->{Profile} = DBI::Profile->new();
125 The Profile attribute holds a blessed reference to a hash object that
127 contains the profile data and attributes relating to it.
128 The class the Profile object is blessed into is expected to provide at
130 least a DESTROY method which will dump the profile data to the DBI
131 trace file handle (STDERR by default).
132 All these examples have the same effect as each other:
134 $h->{Profile} = 0;
136 $h->{Profile} = "/DBI::Profile";
137 $h->{Profile} = DBI::Profile->new();
138 $h->{Profile} = {};
139 $h->{Profile} = { Path => [] };
140 Similarly, these examples have the same effect as each other:
142 $h->{Profile} = 6;
144 $h->{Profile} = "6/DBI::Profile";
145 $h->{Profile} = "!Statement:!MethodName/DBI::Profile";
146 $h->{Profile} = { Path => [ '!Statement', '!MethodName' ] };
147 If a non-blessed hash reference is given then the DBI::Profile module
149 is automatically "require"'d and the reference is blessed into that
150 class.
151 If a string is given then it is processed like this:
153 ($path, $module, $args) = split /\//, $string, 3
155 @path = split /:/, $path
157 @args = split /:/, $args
158 eval "require $module" if $module
160 $module ||= "DBI::Profile"
161 $module->new( Path => \@Path, @args )
163 So the first value is used to select the Path to be used (see below).
165 The second value, if present, is used as the name of a module which
166 will be loaded and it's "new" method called. If not present it defaults
167 to DBI::Profile. Any other values are passed as arguments to the "new"
168 method. For example: ""2/DBIx::OtherProfile/Foo:42"".
169 Numbers can be used as a shorthand way to enable common Path values.
171 The simplest way to explain how the values are interpreted is to show
172 the code:
173 push @Path, "DBI" if $path_elem & 0x01;
175 push @Path, "!Statement" if $path_elem & 0x02;
176 push @Path, "!MethodName" if $path_elem & 0x04;
177 push @Path, "!MethodClass" if $path_elem & 0x08;
178 push @Path, "!Caller2" if $path_elem & 0x10;
179 So "2" is the same as "!Statement" and "6" (2+4) is the same as
181 "!Statement:!Method". Those are the two most commonly used values.
182 Using a negative number will reverse the path. Thus "-6" will group by
183 method name then statement.
184 The splitting and parsing of string values assigned to the Profile
186 attribute may seem a little odd, but there's a good reason for it.
187 Remember that attributes can be embedded in the Data Source Name string
188 which can be passed in to a script as a parameter. For example:
189 dbi:DriverName(Profile=>2):dbname
191 dbi:DriverName(Profile=>{Username}:!Statement/MyProfiler/Foo:42):dbname
192 And also, if the "DBI_PROFILE" environment variable is set then The DBI
194 arranges for every driver handle to share the same profile object. When
195 perl exits a single profile summary will be generated that reflects (as
196 nearly as practical) the total use of the DBI by the application.
197
199 The DBI core expects the Profile attribute value to be a hash reference
200 and if the following values don't exist it will create them as needed:
201 Data
203 A reference to a hash containing the collected profile data.
204 Path
206 The Path value is a reference to an array. Each element controls the
207 value to use at the corresponding level of the profile Data tree.
208 If the value of Path is anything other than an array reference, it is
210 treated as if it was:
211 [ '!Statement' ]
213 The elements of Path array can be one of the following types:
215 Special Constant
217 !Statement
219 Use the current Statement text. Typically that's the value of the
221 Statement attribute for the handle the method was called with. Some
222 methods, like commit() and rollback(), are unrelated to a particular
223 statement. For those methods !Statement records an empty string.
224 For statement handles this is always simply the string that was given
226 to prepare() when the handle was created. For database handles this is
227 the statement that was last prepared or executed on that database
228 handle. That can lead to a little 'fuzzyness' because, for example,
229 calls to the quote() method to build a new statement will typically be
230 associated with the previous statement. In practice this isn't a
231 significant issue and the dynamic Path mechanism can be used to setup
232 your own rules.
233 !MethodName
235 Use the name of the DBI method that the profile sample relates to.
237 !MethodClass
239 Use the fully qualified name of the DBI method, including the package,
241 that the profile sample relates to. This shows you where the method was
242 implemented. For example:
243 'DBD::_::db::selectrow_arrayref' =>
245 0.022902s
246 'DBD::mysql::db::selectrow_arrayref' =>
247 2.244521s / 99 = 0.022445s avg (first 0.022813s, min 0.022051s, max 0.028932s)
248 The "DBD::_::db::selectrow_arrayref" shows that the driver has
250 inherited the selectrow_arrayref method provided by the DBI.
251 But you'll note that there is only one call to
253 DBD::_::db::selectrow_arrayref but another 99 to
254 DBD::mysql::db::selectrow_arrayref. Currently the first call doesn't
255 record the true location. That may change.
256 !Caller
258 Use a string showing the filename and line number of the code calling
260 the method.
261 !Caller2
263 Use a string showing the filename and line number of the code calling
265 the method, as for !Caller, but also include filename and line number
266 of the code that called that. Calls from DBI:: and DBD:: packages are
267 skipped.
268 !File
270 Same as !Caller above except that only the filename is included, not
272 the line number.
273 !File2
275 Same as !Caller2 above except that only the filenames are included, not
277 the line number.
278 !Time
280 Use the current value of time(). Rarely used. See the more useful
282 "!Time~N" below.
283 !Time~N
285 Where "N" is an integer. Use the current value of time() but with
287 reduced precision. The value used is determined in this way:
288 int( time() / N ) * N
290 This is a useful way to segregate a profile into time slots. For
292 example:
293 [ '!Time~60', '!Statement' ]
295 Code Reference
297 The subroutine is passed the handle it was called on and the DBI method
299 name. The current Statement is in $_. The statement string should not
300 be modified, so most subs start with "local $_ = $_;".
301 The list of values it returns is used at that point in the Profile
303 Path. Any undefined values are treated as the string ""undef"".
304 The sub can 'veto' (reject) a profile sample by including a reference
306 to undef ("\undef") in the returned list. That can be useful when you
307 want to only profile statements that match a certain pattern, or only
308 profile certain methods.
309 Subroutine Specifier
311 A Path element that begins with '"&"' is treated as the name of a
313 subroutine in the DBI::ProfileSubs namespace and replaced with the
314 corresponding code reference.
315 Currently this only works when the Path is specified by the
317 "DBI_PROFILE" environment variable.
318 Also, currently, the only subroutine in the DBI::ProfileSubs namespace
320 is '&norm_std_n3'. That's a very handy subroutine when profiling code
321 that doesn't use placeholders. See DBI::ProfileSubs for more
322 information.
323 Attribute Specifier
325 A string enclosed in braces, such as '"{Username}"', specifies that the
327 current value of the corresponding database handle attribute should be
328 used at that point in the Path.
329 Reference to a Scalar
331 Specifies that the current value of the referenced scalar be used at
333 that point in the Path. This provides an efficient way to get
334 'contextual' values into your profile.
335 Other Values
337 Any other values are stringified and used literally.
339 (References, and values that begin with punctuation characters are
341 reserved.)
342
344 Report Format
345 The current accumulated profile data can be formatted and output using
346 print $h->{Profile}->format;
348 To discard the profile data and start collecting fresh data you can do:
350 $h->{Profile}->{Data} = undef;
352 The default results format looks like this:
354 DBI::Profile: 0.001015s 42.7% (5 calls) programname @ YYYY-MM-DD HH:MM:SS
356 '' =>
357 0.000024s / 2 = 0.000012s avg (first 0.000015s, min 0.000009s, max 0.000015s)
358 'SELECT mode,size,name FROM table' =>
359 0.000991s / 3 = 0.000330s avg (first 0.000678s, min 0.000009s, max 0.000678s)
360 Which shows the total time spent inside the DBI, with a count of the
362 total number of method calls and the name of the script being run, then
363 a formatted version of the profile data tree.
364 If the results are being formatted when the perl process is exiting
366 (which is usually the case when the DBI_PROFILE environment variable is
367 used) then the percentage of time the process spent inside the DBI is
368 also shown. If the process is not exiting then the percentage is
369 calculated using the time between the first and last call to the DBI.
370 In the example above the paths in the tree are only one level deep and
372 use the Statement text as the value (that's the default behaviour).
373 The merged profile data at the 'leaves' of the tree are presented as
375 total time spent, count, average time spent (which is simply total time
376 divided by the count), then the time spent on the first call, the time
377 spent on the fastest call, and finally the time spent on the slowest
378 call.
379 The 'avg', 'first', 'min' and 'max' times are not particularly useful
381 when the profile data path only contains the statement text. Here's an
382 extract of a more detailed example using both statement text and method
383 name in the path:
384 'SELECT mode,size,name FROM table' =>
386 'FETCH' =>
387 0.000076s
388 'fetchrow_hashref' =>
389 0.036203s / 108 = 0.000335s avg (first 0.000490s, min 0.000152s, max 0.002786s)
390 Here you can see the 'avg', 'first', 'min' and 'max' for the 108 calls
392 to fetchrow_hashref() become rather more interesting. Also the data
393 for FETCH just shows a time value because it was only called once.
394 Currently the profile data is output sorted by branch names. That may
396 change in a later version so the leaf nodes are sorted by total time
397 per leaf node.
398 Report Destination
400 The default method of reporting is for the DESTROY method of the
401 Profile object to format the results and write them using:
402 DBI->trace_msg($results, 0); # see $ON_DESTROY_DUMP below
404 to write them to the DBI trace() filehandle (which defaults to STDERR).
406 To direct the DBI trace filehandle to write to a file without enabling
407 tracing the trace() method can be called with a trace level of 0. For
408 example:
409 DBI->trace(0, $filename);
411 The same effect can be achieved without changing the code by setting
413 the "DBI_TRACE" environment variable to "0=filename".
414 The $DBI::Profile::ON_DESTROY_DUMP variable holds a code ref that's
416 called to perform the output of the formatted results. The default
417 value is:
418 $ON_DESTROY_DUMP = sub { DBI->trace_msg($results, 0) };
420 Apart from making it easy to send the dump elsewhere, it can also be
422 useful as a simple way to disable dumping results.
423
425 Child handles inherit a reference to the Profile attribute value of
426 their parent. So if profiling is enabled for a database handle then by
427 default the statement handles created from it all contribute to the
428 same merged profile data tree.
429
431 format
432 See "REPORTING".
433 as_node_path_list
435 @ary = $dbh->{Profile}->as_node_path_list();
436 @ary = $dbh->{Profile}->as_node_path_list($node, $path);
437 Returns the collected data ($dbh->{Profile}{Data}) restructured into a
439 list of array refs, one for each leaf node in the Data tree. This
440 'flat' structure is often much simpler for applications to work with.
441 The first element of each array ref is a reference to the leaf node.
443 The remaining elements are the 'path' through the data tree to that
444 node.
445 For example, given a data tree like this:
447 {key1a}{key2a}[node1]
449 {key1a}{key2b}[node2]
450 {key1b}{key2a}{key3a}[node3]
451 The as_node_path_list() method will return this list:
453 [ [node1], 'key1a', 'key2a' ]
455 [ [node2], 'key1a', 'key2b' ]
456 [ [node3], 'key1b', 'key2a', 'key3a' ]
457 The nodes are ordered by key, depth-first.
459 The $node argument can be used to focus on a sub-tree. If not
461 specified it defaults to $dbh->{Profile}{Data}.
462 The $path argument can be used to specify a list of path elements that
464 will be added to each element of the returned list. If not specified it
465 defaults to a ref to an empty array.
466 as_text
468 @txt = $dbh->{Profile}->as_text();
469 $txt = $dbh->{Profile}->as_text({
470 node => undef,
471 path => [],
472 separator => " > ",
473 format => '%1$s: %11$fs / %10$d = %2$fs avg (first %12$fs, min %13$fs, max %14$fs)'."\n";
474 sortsub => sub { ... },
475 );
476 Returns the collected data ($dbh->{Profile}{Data}) reformatted into a
478 list of formatted strings. In scalar context the list is returned as a
479 single concatenated string.
480 A hashref can be used to pass in arguments, the default values are
482 shown in the example above.
483 The "node" and <path> arguments are passed to as_node_path_list().
485 The "separator" argument is used to join the elements of the path for
487 each leaf node.
488 The "sortsub" argument is used to pass in a ref to a sub that will
490 order the list. The subroutine will be passed a reference to the array
491 returned by as_node_path_list() and should sort the contents of the
492 array in place. The return value from the sub is ignored. For example,
493 to sort the nodes by the second level key you could use:
494 sortsub => sub { my $ary=shift; @$ary = sort { $a->[2] cmp $b->[2] } @$ary }
496 The "format" argument is a "sprintf" format string that specifies the
498 format to use for each leaf node. It uses the explicit format
499 parameter index mechanism to specify which of the arguments should
500 appear where in the string. The arguments to sprintf are:
501 1: path to node, joined with the separator
503 2: average duration (total duration/count)
504 (3 thru 9 are currently unused)
505 10: count
506 11: total duration
507 12: first duration
508 13: smallest duration
509 14: largest duration
510 15: time of first call
511 16: time of first call
512
514 Recall that "$h->{Profile}->{Data}" is a reference to the collected
515 data. Either to a 'leaf' array (when the Path is empty, i.e.,
516 DBI_PROFILE env var is 1), or a reference to hash containing values
517 that are either further hash references or leaf array references.
518 Sometimes it's useful to be able to summarise some or all of the
520 collected data. The dbi_profile_merge_nodes() function can be used to
521 merge leaf node values.
522 dbi_profile_merge_nodes
524 use DBI qw(dbi_profile_merge_nodes);
525 $time_in_dbi = dbi_profile_merge_nodes(my $totals=[], @$leaves);
527 Merges profile data node. Given a reference to a destination array, and
529 zero or more references to profile data, merges the profile data into
530 the destination array. For example:
531 $time_in_dbi = dbi_profile_merge_nodes(
533 my $totals=[],
534 [ 10, 0.51, 0.11, 0.01, 0.22, 1023110000, 1023110010 ],
535 [ 15, 0.42, 0.12, 0.02, 0.23, 1023110005, 1023110009 ],
536 );
537 $totals will then contain
539 [ 25, 0.93, 0.11, 0.01, 0.23, 1023110000, 1023110010 ]
541 and $time_in_dbi will be 0.93;
543 The second argument need not be just leaf nodes. If given a reference
545 to a hash then the hash is recursively searched for leaf nodes and all
546 those found are merged.
547 For example, to get the time spent 'inside' the DBI during an http
549 request, your logging code run at the end of the request (i.e. mod_perl
550 LogHandler) could use:
551 my $time_in_dbi = 0;
553 if (my $Profile = $dbh->{Profile}) { # if DBI profiling is enabled
554 $time_in_dbi = dbi_profile_merge_nodes(my $total=[], $Profile->{Data});
555 $Profile->{Data} = {}; # reset the profile data
556 }
557 If profiling has been enabled then $time_in_dbi will hold the time
559 spent inside the DBI for that handle (and any other handles that share
560 the same profile data) since the last request.
561 Prior to DBI 1.56 the dbi_profile_merge_nodes() function was called
563 dbi_profile_merge(). That name still exists as an alias.
564
566 Using The Path Attribute
567 XXX example to be added later using a selectall_arrayref call
568 XXX nested inside a fetch loop where the first column of the
569 XXX outer loop is bound to the profile Path using
570 XXX bind_column(1, \${ $dbh->{Profile}->{Path}->[0] })
571 XXX so you end up with separate profiles for each loop
572 XXX (patches welcome to add this to the docs :)
573 Adding Your Own Samples
575 The dbi_profile() function can be used to add extra sample data into
576 the profile data tree. For example:
577 use DBI;
579 use DBI::Profile (dbi_profile dbi_time);
580 my $t1 = dbi_time(); # floating point high-resolution time
582 ... execute code you want to profile here ...
584 my $t2 = dbi_time();
586 dbi_profile($h, $statement, $method, $t1, $t2);
587 The $h parameter is the handle the extra profile sample should be
589 associated with. The $statement parameter is the string to use where
590 the Path specifies !Statement. If $statement is undef then
591 $h->{Statement} will be used. Similarly $method is the string to use if
592 the Path specifies !MethodName. There is no default value for $method.
593 The $h->{Profile}{Path} attribute is processed by dbi_profile() in the
595 usual way.
596 The $h parameter is usually a DBI handle but it can also be a reference
598 to a hash, in which case the dbi_profile() acts on each defined value
599 in the hash. This is an efficient way to update multiple profiles with
600 a single sample, and is used by the DashProfiler module.
601
603 Alternate profile modules must subclass DBI::Profile to help ensure
604 they work with future versions of the DBI.
605
607 Applications which generate many different statement strings (typically
608 because they don't use placeholders) and profile with !Statement in the
609 Path (the default) will consume memory in the Profile Data structure
610 for each statement. Use a code ref in the Path to return an edited
611 (simplified) form of the statement.
612 If a method throws an exception itself (not via RaiseError) then it
614 won't be counted in the profile.
615 If a HandleError subroutine throws an exception (rather than returning
617 0 and letting RaiseError do it) then the method call won't be counted
618 in the profile.
619 Time spent in DESTROY is added to the profile of the parent handle.
621 Time spent in DBI->*() methods is not counted. The time spent in the
623 driver connect method, $drh->connect(), when it's called by
624 DBI->connect is counted if the DBI_PROFILE environment variable is set.
625 Time spent fetching tied variables, $DBI::errstr, is counted.
627 Time spent in FETCH for $h->{Profile} is not counted, so getting the
629 profile data doesn't alter it.
630 DBI::PurePerl does not support profiling (though it could in theory).
632 For asynchronous queries, time spent while the query is running on the
634 backend is not counted.
635 A few platforms don't support the gettimeofday() high resolution time
637 function used by the DBI (and available via the dbi_time() function).
638 In which case you'll get integer resolution time which is mostly
639 useless.
640 On Windows platforms the dbi_time() function is limited to millisecond
642 resolution. Which isn't sufficiently fine for our needs, but still much
643 better than integer resolution. This limited resolution means that fast
644 method calls will often register as taking 0 time. And timings in
645 general will have much more 'jitter' depending on where within the
646 'current millisecond' the start and end timing was taken.
647 This documentation could be more clear. Probably needs to be reordered
649 to start with several examples and build from there. Trying to explain
650 the concepts first seems painful and to lead to just as many forward
651 references. (Patches welcome!)
652perl v5.30.1 2020-02-10 DBI::Profile(3)