1foo2xqx-wrapper(1) General Commands Manual foo2xqx-wrapper(1)
2
8 foo2xqx-wrapper - Convert Postscript into a XQX printer stream
9
11 foo2xqx-wrapper [options] [ps-file]
12
14 foo2xqx-wrapper is a Foomatic compatible printer wrapper for the
15 foo2xqx printer driver. This script reads a Postscript ps-file or
16 standard input and converts it to XQX printer format for driving the HP
17 LaserJet P1005/P1006/P1007/P1008, the HP LaserJet P1505, the HP Laser‐
18 Jet P2014, the HP LaserJet M1005 MFP, the HP LaserJet M1120 MFP, the HP
19 LaserJet Pro M1132s MFP, the HP LaserJet Pro M1212nf MFP, and other
20 XQX-based printers.
21 This script can be used in a standalone fashion, but is intended to be
23 called from a printer spooler system which uses the Foomatic printer
24 database.
25
28 Normal Options
29 These are the options used to select the parameters of a print job that
30 are usually controlled on a per job basis.
31 -d duplex
33 Duplex code to send to printer [1].
34 │ │ │
35 │1 off │ 2 long edge │ 3 short edge
36 -m media
38 Media code to send to printer [1].
39 ─────────────────────────
41 Media M1005
42 ─────────────────────────
43 standard 1
44 transparency 2
45 envelope 257
46 letterhead 259
47 thick 261
48 postcard 262
49 labels 263
50 -p paper
52 Paper size code to send to printer [1].
53 ┌──────────────────┬───────────────────┐
55 │ 1 letter │ 9 A4 │
56 │ 5 legal │ 11 A5 │
57 │ 7 executive │ 13 B5 │
58 │ 20 env #10 │ 27 env DL │
59 │ 28 env C5 │ 34 env B5 │
60 │ 37 env Monarch │ 257 16k 197x273 │
61 │263 16k 184x260 │ 263 16k 195x270 │
62 └──────────────────┴───────────────────┘
63 -n copies
64 Number of copies [1].
65 -r xresxyres
67 Set device resolution in pixels/inch [1200x600].
68 -s source
70 Source (Input Slot) code to send to printer [7].
71 ┌──────────┬────────────┐
73 │1 upper │ 4 manual │
74 │2 lower │ 7 auto │
75 └──────────┴────────────┘
76 -t Draft mode. Every other pixel is white.
77 -T density
79 Print density (1-5). The default is 3 (medium).
80 -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
82 Print in N-up. Requires the psutils package.
83 -o orient
85 Orientation used for N-up.
86 Portrait -op (normal)
88 Landscape -ol (rotated 90 degrees anticlockwise)
89 Seascape -os (rotated 90 degrees clockwise)
90 Printer Tweaking Options
92 These are the options used to customize the operation of foo2xqx for a
93 particular printer.
94 -u xoffxyoff
96 Set the offset of the start of the printable region from the
97 upper left corner, in pixels [varies with paper size]. The
98 defaults should work on the 2200DL and 2300DL, and have not been
99 tested on any other printers.
100 -l xoffxyoff
102 Set the offset of the end of the printable region from the lower
103 right corner, in pixels [varies with paper size]. The defaults
104 should work on the 2200DL and 2300DL, and have not been tested
105 on any other printers.
106 -L mask
108 Send the logical clipping values from -u/-l in the ZjStream.
109 foo2xqx-wrapper always runs Ghostscript with the ideal page
110 dimensions, so that the scale of the image is correct, regard‐
111 less whether or not the printer has unprintable regions. This
112 option is used to move the position of the clipped image back to
113 where it belongs on the page. The default is to send the amount
114 which was clipped by -u and -l, and should be good in most
115 cases.
116 0 don't send any logical clipping amounts
118 1 only send Y clipping amount
119 2 only send X clipping amount
120 3 send both X and Y clipping amounts
121 Debugging Options
123 These options are used for debugging foo2xqx and its wrapper.
124 -D level
126 Set Debug level [0].
127
130 Create a monochrome ZjStream from a Postscript document, examine it,
131 and then print it using a RAW print queue:
132 foo2xqx-wrapper testpage.ps > testpage.xqx
134 xqxdecode < testpage.xqx
135 lpr -P raw testpage.xqx
136
139 /usr/bin/foo2xqx-wrapper
140
142 foo2xqx(1), xqxdecode(1)
143
145 Rick Richardson <rick.richardson@comcast.net>
146 http://foo2xqx.rkkda.com/
147