1podman-network-create(1)() podman-network-create(1)()
2
6 podman-network-create - Create a Podman CNI network
7
10 podman network create [options] name
11
14 Create a CNI-network configuration for use with Podman. By default,
15 Podman creates a bridge connection. A Macvlan connection can be cre‐
16 ated with the -d macvlan option. A parent device for macvlan can be
17 designated with the -o parent= option. In the case of Macvlan connec‐
18 tions, the CNI dhcp plugin needs to be activated or the container image
19 must have a DHCP client to interact with the host network's DHCP
20 server.
21 If no options are provided, Podman will assign a free subnet and name
24 for your network.
25 Upon completion of creating the network, Podman will display the path
28 to the newly added network file.
29
32 --disable-dns
33 Disables the DNS plugin for this network which if enabled, can perform
34 container to container name resolution.
35 --driver, -d
38 Driver to manage the network (default "bridge"). Currently only bridge
39 is supported.
40 --opt=option, -o
43 Set driver specific options.
44 For the bridge driver the following options are supported: mtu and
47 vlan. The mtu option sets the Maximum Transmission Unit (MTU) and
48 takes an integer value. The vlan option assign VLAN tag and enables
49 vlan_filtering. Defaults to none.
50 --gateway
53 Define a gateway for the subnet. If you want to provide a gateway
54 address, you must also provide a subnet option.
55 --internal
58 Restrict external access of this network. Note when using this option,
59 the dnsname plugin will be automatically disabled.
60 --ip-range
63 Allocate container IP from a range. The range must be a complete sub‐
64 net and in CIDR notation. The ip-range option must be used with a sub‐
65 net option.
66 --label
69 Set metadata for a network (e.g., --label mykey=value).
70 --macvlan
73 This option is being deprecated
74 Create a Macvlan based connection rather than a classic bridge. You
77 must pass an interface name from the host for the Macvlan connection.
78 --subnet
81 The subnet in CIDR notation.
82 --ipv6
85 Enable IPv6 (Dual Stack) networking. You must pass a IPv6 subnet. The
86 subnet option must be used with the ipv6 option.
87
90 Create a network with no options
91 # podman network create
94 /etc/cni/net.d/cni-podman-4.conflist
95 Create a network named newnet that uses 192.5.0.0/16 for its subnet.
99 # podman network create --subnet 192.5.0.0/16 newnet
102 /etc/cni/net.d/newnet.conflist
103 Create an IPv6 network named newnetv6, you must specify the subnet for
107 this network, otherwise the command will fail. For this example, we
108 use 2001:db8::/64 for its subnet.
109 # podman network create --subnet 2001:db8::/64 --ipv6 newnetv6
112 /etc/cni/net.d/newnetv6.conflist
113 Create a network named newnet that uses 192.168.33.0/24 and defines a
117 gateway as 192.168.133.3
118 # podman network create --subnet 192.168.33.0/24 --gateway 192.168.33.3 newnet
121 /etc/cni/net.d/newnet.conflist
122 Create a network that uses a *192.168.55.0/24** subnet and has an IP
126 address range of 192.168.55.129 - 192.168.55.254.
127 # podman network create --subnet 192.168.55.0/24 --ip-range 192.168.55.128/25
130 /etc/cni/net.d/cni-podman-5.conflist
131 Create a Macvlan based network using the host interface eth0
135 # podman network create -d macvlan -o parent=eth0 newnet
138 /etc/cni/net.d/newnet.conflist
139
143 podman(1), podman-network(1), podman-network-inspect(1)
144
147 August 2019, Originally compiled by Brent Baude bbaude@redhat.com
148 ⟨mailto:bbaude@redhat.com⟩
149 podman-network-create(1)()