1sstat(1) Slurm Commands sstat(1)
2
6 sstat - Display various status information of a running job/step.
7
10 sstat [OPTIONS...]
11
14 Status information for running jobs invoked with Slurm.
15 The sstat command displays job status information for your analysis.
17 The sstat command displays information pertaining to CPU, Task, Node,
18 Resident Set Size (RSS) and Virtual Memory (VM). You can tailor the
19 output with the use of the --fields= option to specify the fields to be
20 shown.
21 For the root user, the sstat command displays job status data for any
23 job running on the system.
24 For the non-root user, the sstat output is limited to the user's jobs.
26 NOTE: The sstat command requires that the jobacct_gather plugin be
29 installed and operational.
30 NOTE: The sstat command is not supported on Cray ALPS.
32 -a, --allsteps
35 Print all steps for the given job(s) when no step is specified.
36 -e, --helpformat
39 Print a list of fields that can be specified with the '--format'
40 option.
41 -h, --help
44 Displays a general help message.
45 -i, --pidformat
48 Predefined format to list the pids running for each job step.
49 (JobId,Nodes,Pids)
50 -j, --jobs
53 Format is <job(.step)>. Stat this job step or comma-separated
54 list of job steps. This option is required. The step portion
55 will default to lowest step running if not specified, unless the
56 --allsteps flag is set where not specifying a step will result
57 in all running steps to be displayed. NOTE: A step id of
58 'batch' will display the information about the batch step.
59 NOTE: A step id of 'extern' will display the information about
60 the extern step. This step is only available when using Pro‐
61 logFlags=contain
62 -n, --noheader
65 No heading will be added to the output. The default action is to
66 display a header.
67 --noconvert
70 Don't convert units from their original type (e.g. 2048M won't
71 be converted to 2G).
72 -o, --format, --fields
75 Comma separated list of fields. (use '--helpformat' for a list
76 of available fields).
77 NOTE: When using the format option for listing various fields
79 you can put a %NUMBER afterwards to specify how many characters
80 should be printed.
81 i.e. format=name%30 will print 30 characters of field name right
83 justified. A -30 will print 30 characters left justified.
84 -p, --parsable
87 output will be '|' delimited with a '|' at the end
88 -P, --parsable2
91 output will be '|' delimited without a '|' at the end
92 --usage
95 Display a command usage summary.
96 -v, --verbose
99 Primarily for debugging purposes, report the state of various
100 variables during processing.
101 -V, --version
104 Print version.
105 Job Status Fields
109 The following are the field options:
110 AveCPU Average (system + user) CPU time of all tasks in job.
112 AveCPUFreq
115 Average weighted CPU frequency of all tasks in job, in
116 kHz.
117 AveDiskRead
120 Average number of bytes read by all tasks in job.
121 AveDiskWrite
124 Average number of bytes written by all tasks in job.
125 AvePages
128 Average number of page faults of all tasks in job.
129 AveRSS Average resident set size of all tasks in job.
132 AveVMSize
135 Average Virtual Memory size of all tasks in job.
136 ConsumedEnergy
139 Total energy consumed by all tasks in job, in joules.
140 Note: Only in case of exclusive job allocation this value
141 reflects the jobs' real energy consumption.
142 JobID The number of the job or job step. It is in the form:
145 job.jobstep.
146 MaxDiskRead
149 Maximum number of bytes read by all tasks in job.
150 MaxDiskReadNode
153 The node on which the maxdiskread occurred.
154 MaxDiskReadTask
157 The task ID where the maxdiskread occurred.
158 MaxDiskWrite
161 Maximum number of bytes written by all tasks in job.
162 MaxDiskWriteNode
165 The node on which the maxdiskwrite occurred.
166 MaxDiskWriteTask
169 The task ID where the maxdiskwrite occurred.
170 MaxPages
173 Maximum number of page faults of all tasks in job.
174 MaxPagesNode
177 The node on which the maxpages occurred.
178 MaxPagesTask
181 The task ID where the maxpages occurred.
182 MaxRSS Maximum resident set size of all tasks in job.
185 MaxRSSNode
188 The node on which the maxrss occurred.
189 MaxRSSTask
192 The task ID where the maxrss occurred.
193 MaxVMSize
196 Maximum Virtual Memory size of all tasks in job.
197 MaxVMSizeNode
200 The node on which the maxvsize occurred.
201 MaxVMSizeTask
204 The task ID where the maxvsize occurred.
205 MinCPU Minimum (system + user) CPU time of all tasks in job.
208 MinCPUNode
211 The node on which the mincpu occurred.
212 MinCPUTask
215 The task ID where the mincpu occurred.
216 NTasks Total number of tasks in a job or step.
219 ReqCPUFreq
222 Requested CPU frequency for the step, in kHz.
223 TresUsageInAve
226 Tres average usage in by all tasks in job. NOTE: If cor‐
227 responding TresUsageInMaxTask is -1 the metric is node
228 centric instead of task.
229 TresUsageInMax
232 Tres maximum usage in by all tasks in job. NOTE: If cor‐
233 responding TresUsageInMaxTask is -1 the metric is node
234 centric instead of task.
235 TresUsageInMaxNode
238 Node for which each maximum TRES usage out occurred.
239 TresUsageInMaxTask
242 Task for which each maximum TRES usage out occurred.
243 TresUsageOutAve
246 Tres average usage out by all tasks in job. NOTE: If
247 corresponding TresUsageOutMaxTask is -1 the metric is
248 node centric instead of task.
249 TresUsageOutMax
252 Tres maximum usage out by all tasks in job. NOTE: If
253 corresponding TresUsageOutMaxTask is -1 the metric is
254 node centric instead of task.
255 TresUsageOutMaxNode
258 Node for which each maximum TRES usage out occurred.
259 TresUsageOutMaxTask
262 Task for which each maximum TRES usage out occurred.
263
266 Executing sstat sends a remote procedure call to slurmctld. If enough
267 calls from sstat or other Slurm client commands that send remote proce‐
268 dure calls to the slurmctld daemon come in at once, it can result in a
269 degradation of performance of the slurmctld daemon, possibly resulting
270 in a denial of service.
271 Do not run sstat or other Slurm client commands that send remote proce‐
273 dure calls to slurmctld from loops in shell scripts or other programs.
274 Ensure that programs limit calls to sstat to the minimum necessary for
275 the information you are trying to gather.
276
279 Some sstat options may be set via environment variables. These environ‐
280 ment variables, along with their corresponding options, are listed
281 below. (Note: commandline options will always override these settings)
282 SLURM_CONF The location of the Slurm configuration file.
284
287 sstat --format=AveCPU,AvePages,AveRSS,AveVMSize,JobID -j 11
288 25:02.000 0K 1.37M 5.93M 9.0
289 sstat -p --format=AveCPU,AvePages,AveRSS,AveVMSize,JobID -j 11
292 25:02.000|0K|1.37M|5.93M|9.0|
293
296 Copyright (C) 2009 Lawrence Livermore National Security. Produced at
297 Lawrence Livermore National Laboratory (cf, DISCLAIMER).
298 Copyright (C) 2010-2013 SchedMD LLC.
299 This file is part of Slurm, a resource management program. For
301 details, see <https://slurm.schedmd.com/>.
302 Slurm is free software; you can redistribute it and/or modify it under
304 the terms of the GNU General Public License as published by the Free
305 Software Foundation; either version 2 of the License, or (at your
306 option) any later version.
307 Slurm is distributed in the hope that it will be useful, but WITHOUT
309 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
310 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
311 for more details.
312
315 sacct(1)
316June 2018 Slurm Commands sstat(1)