1devicekit_power_selinux(8S)ELinux Policy devicekit_powedrevicekit_power_selinux(8)
2
3
4
6 devicekit_power_selinux - Security Enhanced Linux Policy for the
7 devicekit_power processes
8
10 Security-Enhanced Linux secures the devicekit_power processes via flex‐
11 ible mandatory access control.
12
13 The devicekit_power processes execute with the devicekit_power_t
14 SELinux type. You can check if you have these processes running by exe‐
15 cuting the ps command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep devicekit_power_t
20
21
22
24 The devicekit_power_t SELinux type can be entered via the
25 devicekit_power_exec_t file type.
26
27 The default entrypoint paths for the devicekit_power_t domain are the
28 following:
29
30 /usr/libexec/upowerd, /usr/lib/upower/upowerd, /usr/libexec/devkit-
31 power-daemon
32
34 SELinux defines process types (domains) for each process running on the
35 system
36
37 You can see the context of a process using the -Z option to ps
38
39 Policy governs the access confined processes have to files. SELinux
40 devicekit_power policy is very flexible allowing users to setup their
41 devicekit_power processes in as secure a method as possible.
42
43 The following process types are defined for devicekit_power:
44
45 devicekit_power_t
46
47 Note: semanage permissive -a devicekit_power_t can be used to make the
48 process type devicekit_power_t permissive. SELinux does not deny access
49 to permissive process types, but the AVC (SELinux denials) messages are
50 still generated.
51
52
54 SELinux policy is customizable based on least access required.
55 devicekit_power policy is extremely flexible and has several booleans
56 that allow you to manipulate the policy and run devicekit_power with
57 the tightest access possible.
58
59
60
61 If you want to deny user domains applications to map a memory region as
62 both executable and writable, this is dangerous and the executable
63 should be reported in bugzilla, you must turn on the deny_execmem bool‐
64 ean. Enabled by default.
65
66 setsebool -P deny_execmem 1
67
68
69
70 If you want to control the ability to mmap a low area of the address
71 space, as configured by /proc/sys/vm/mmap_min_addr, you must turn on
72 the mmap_low_allowed boolean. Disabled by default.
73
74 setsebool -P mmap_low_allowed 1
75
76
77
78 If you want to disable kernel module loading, you must turn on the
79 secure_mode_insmod boolean. Enabled by default.
80
81 setsebool -P secure_mode_insmod 1
82
83
84
85 If you want to allow unconfined executables to make their heap memory
86 executable. Doing this is a really bad idea. Probably indicates a
87 badly coded executable, but could indicate an attack. This executable
88 should be reported in bugzilla, you must turn on the selin‐
89 uxuser_execheap boolean. Disabled by default.
90
91 setsebool -P selinuxuser_execheap 1
92
93
94
95 If you want to allow unconfined executables to make their stack exe‐
96 cutable. This should never, ever be necessary. Probably indicates a
97 badly coded executable, but could indicate an attack. This executable
98 should be reported in bugzilla, you must turn on the selinuxuser_exec‐
99 stack boolean. Disabled by default.
100
101 setsebool -P selinuxuser_execstack 1
102
103
104
106 The SELinux process type devicekit_power_t can manage files labeled
107 with the following file types. The paths listed are the default paths
108 for these file types. Note the processes UID still need to have DAC
109 permissions.
110
111 file_type
112
113 all files on the system
114
115
117 SELinux requires files to have an extended attribute to define the file
118 type.
119
120 You can see the context of a file using the -Z option to ls
121
122 Policy governs the access confined processes have to these files.
123 SELinux devicekit_power policy is very flexible allowing users to setup
124 their devicekit_power processes in as secure a method as possible.
125
126 The following file types are defined for devicekit_power:
127
128
129
130 devicekit_power_exec_t
131
132 - Set files with the devicekit_power_exec_t type, if you want to tran‐
133 sition an executable to the devicekit_power_t domain.
134
135
136 Paths:
137 /usr/libexec/upowerd, /usr/lib/upower/upowerd,
138 /usr/libexec/devkit-power-daemon
139
140
141 Note: File context can be temporarily modified with the chcon command.
142 If you want to permanently change the file context you need to use the
143 semanage fcontext command. This will modify the SELinux labeling data‐
144 base. You will need to use restorecon to apply the labels.
145
146
148 semanage fcontext can also be used to manipulate default file context
149 mappings.
150
151 semanage permissive can also be used to manipulate whether or not a
152 process type is permissive.
153
154 semanage module can also be used to enable/disable/install/remove pol‐
155 icy modules.
156
157 semanage boolean can also be used to manipulate the booleans
158
159
160 system-config-selinux is a GUI tool available to customize SELinux pol‐
161 icy settings.
162
163
165 This manual page was auto-generated using sepolicy manpage .
166
167
169 selinux(8), devicekit_power(8), semanage(8), restorecon(8), chcon(1),
170 sepolicy(8), setsebool(8)
171
172
173
174devicekit_power 21-03-26 devicekit_power_selinux(8)