1minidlna_selinux(8) SELinux Policy minidlna minidlna_selinux(8)
2
3
4
6 minidlna_selinux - Security Enhanced Linux Policy for the minidlna pro‐
7 cesses
8
10 Security-Enhanced Linux secures the minidlna processes via flexible
11 mandatory access control.
12
13 The minidlna processes execute with the minidlna_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep minidlna_t
20
21
22
24 The minidlna_t SELinux type can be entered via the minidlna_exec_t file
25 type.
26
27 The default entrypoint paths for the minidlna_t domain are the follow‐
28 ing:
29
30 /usr/sbin/minidlna
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 minidlna policy is very flexible allowing users to setup their minidlna
40 processes in as secure a method as possible.
41
42 The following process types are defined for minidlna:
43
44 minidlna_t
45
46 Note: semanage permissive -a minidlna_t can be used to make the process
47 type minidlna_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required.
54 minidlna policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run minidlna with the tightest
56 access possible.
57
58
59
60 If you want to determine whether minidlna can read generic user con‐
61 tent, you must turn on the minidlna_read_generic_user_content boolean.
62 Disabled by default.
63
64 setsebool -P minidlna_read_generic_user_content 1
65
66
67
68 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70
71 setsebool -P fips_mode 1
72
73
74
76 The SELinux process type minidlna_t can manage files labeled with the
77 following file types. The paths listed are the default paths for these
78 file types. Note the processes UID still need to have DAC permissions.
79
80 cluster_conf_t
81
82 /etc/cluster(/.*)?
83
84 cluster_var_lib_t
85
86 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94
95 cluster_var_run_t
96
97 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108
109 minidlna_db_t
110
111 /var/lib/minidlna(/.*)?
112 /var/cache/minidlna(/.*)?
113
114 minidlna_var_run_t
115
116 /var/run/minidlna(/.*)?
117
118 root_t
119
120 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
121 /
122 /initrd
123
124
126 SELinux requires files to have an extended attribute to define the file
127 type.
128
129 You can see the context of a file using the -Z option to ls
130
131 Policy governs the access confined processes have to these files.
132 SELinux minidlna policy is very flexible allowing users to setup their
133 minidlna processes in as secure a method as possible.
134
135 EQUIVALENCE DIRECTORIES
136
137
138 minidlna policy stores data with multiple different file context types
139 under the /var/log/minidlna directory. If you would like to store the
140 data in a different directory you can use the semanage command to cre‐
141 ate an equivalence mapping. If you wanted to store this data under the
142 /srv directory you would execute the following command:
143
144 semanage fcontext -a -e /var/log/minidlna /srv/minidlna
145 restorecon -R -v /srv/minidlna
146
147 STANDARD FILE CONTEXT
148
149 SELinux defines the file context types for the minidlna, if you wanted
150 to store files with these types in a diffent paths, you need to execute
151 the semanage command to sepecify alternate labeling and then use
152 restorecon to put the labels on disk.
153
154 semanage fcontext -a -t minidlna_var_run_t '/srv/myminidlna_con‐
155 tent(/.*)?'
156 restorecon -R -v /srv/myminidlna_content
157
158 Note: SELinux often uses regular expressions to specify labels that
159 match multiple files.
160
161 The following file types are defined for minidlna:
162
163
164
165 minidlna_conf_t
166
167 - Set files with the minidlna_conf_t type, if you want to treat the
168 files as minidlna configuration data, usually stored under the /etc
169 directory.
170
171
172
173 minidlna_db_t
174
175 - Set files with the minidlna_db_t type, if you want to treat the files
176 as minidlna database content.
177
178
179 Paths:
180 /var/lib/minidlna(/.*)?, /var/cache/minidlna(/.*)?
181
182
183 minidlna_exec_t
184
185 - Set files with the minidlna_exec_t type, if you want to transition an
186 executable to the minidlna_t domain.
187
188
189
190 minidlna_initrc_exec_t
191
192 - Set files with the minidlna_initrc_exec_t type, if you want to tran‐
193 sition an executable to the minidlna_initrc_t domain.
194
195
196
197 minidlna_log_t
198
199 - Set files with the minidlna_log_t type, if you want to treat the data
200 as minidlna log data, usually stored under the /var/log directory.
201
202
203 Paths:
204 /var/log/minidlna(/.*)?, /var/log/minidlna.log.*
205
206
207 minidlna_var_run_t
208
209 - Set files with the minidlna_var_run_t type, if you want to store the
210 minidlna files under the /run or /var/run directory.
211
212
213
214 Note: File context can be temporarily modified with the chcon command.
215 If you want to permanently change the file context you need to use the
216 semanage fcontext command. This will modify the SELinux labeling data‐
217 base. You will need to use restorecon to apply the labels.
218
219
221 semanage fcontext can also be used to manipulate default file context
222 mappings.
223
224 semanage permissive can also be used to manipulate whether or not a
225 process type is permissive.
226
227 semanage module can also be used to enable/disable/install/remove pol‐
228 icy modules.
229
230 semanage boolean can also be used to manipulate the booleans
231
232
233 system-config-selinux is a GUI tool available to customize SELinux pol‐
234 icy settings.
235
236
238 This manual page was auto-generated using sepolicy manpage .
239
240
242 selinux(8), minidlna(8), semanage(8), restorecon(8), chcon(1), sepol‐
243 icy(8), setsebool(8)
244
245
246
247minidlna 21-03-26 minidlna_selinux(8)