phc2sys_selinux(8)

1phc2sys_selinux(8)          SELinux Policy phc2sys          phc2sys_selinux(8)
2
3
4

NAME

6       phc2sys_selinux  -  Security Enhanced Linux Policy for the phc2sys pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  phc2sys  processes  via  flexible
11       mandatory access control.
12
13       The  phc2sys processes execute with the phc2sys_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep phc2sys_t
20
21
22

ENTRYPOINTS

24       The  phc2sys_t  SELinux type can be entered via the phc2sys_exec_t file
25       type.
26
27       The default entrypoint paths for the phc2sys_t domain are  the  follow‐
28       ing:
29
30       /usr/sbin/phc2sys
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       phc2sys  policy  is very flexible allowing users to setup their phc2sys
40       processes in as secure a method as possible.
41
42       The following process types are defined for phc2sys:
43
44       phc2sys_t
45
46       Note: semanage permissive -a phc2sys_t can be used to make the  process
47       type  phc2sys_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  phc2sys
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run phc2sys with the tightest access possi‐
56       ble.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

MANAGED FILES

68       The  SELinux  process  type phc2sys_t can manage files labeled with the
69       following file types.  The paths listed are the default paths for these
70       file types.  Note the processes UID still need to have DAC permissions.
71
72       chronyd_tmpfs_t
73
74
75       cluster_conf_t
76
77            /etc/cluster(/.*)?
78
79       cluster_var_lib_t
80
81            /var/lib/pcsd(/.*)?
82            /var/lib/cluster(/.*)?
83            /var/lib/openais(/.*)?
84            /var/lib/pengine(/.*)?
85            /var/lib/corosync(/.*)?
86            /usr/lib/heartbeat(/.*)?
87            /var/lib/heartbeat(/.*)?
88            /var/lib/pacemaker(/.*)?
89
90       cluster_var_run_t
91
92            /var/run/crm(/.*)?
93            /var/run/cman_.*
94            /var/run/rsctmp(/.*)?
95            /var/run/aisexec.*
96            /var/run/heartbeat(/.*)?
97            /var/run/corosync-qnetd(/.*)?
98            /var/run/corosync-qdevice(/.*)?
99            /var/run/corosync.pid
100            /var/run/cpglockd.pid
101            /var/run/rgmanager.pid
102            /var/run/cluster/rgmanager.sk
103
104       gpsd_tmpfs_t
105
106
107       ntpd_tmpfs_t
108
109
110       root_t
111
112            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
113            /
114            /initrd
115
116       timemaster_tmpfs_t
117
118
119       timemaster_var_run_t
120
121            /var/run/timemaster(/.*)?
122
123

FILE CONTEXTS

125       SELinux requires files to have an extended attribute to define the file
126       type.
127
128       You can see the context of a file using the -Z option to ls
129
130       Policy governs the access  confined  processes  have  to  these  files.
131       SELinux  phc2sys  policy is very flexible allowing users to setup their
132       phc2sys processes in as secure a method as possible.
133
134       STANDARD FILE CONTEXT
135
136       SELinux defines the file context types for the phc2sys, if  you  wanted
137       to store files with these types in a diffent paths, you need to execute
138       the semanage command  to  sepecify  alternate  labeling  and  then  use
139       restorecon to put the labels on disk.
140
141       semanage   fcontext   -a  -t  phc2sys_unit_file_t  '/srv/myphc2sys_con‐
142       tent(/.*)?'
143       restorecon -R -v /srv/myphc2sys_content
144
145       Note: SELinux often uses regular expressions  to  specify  labels  that
146       match multiple files.
147
148       The following file types are defined for phc2sys:
149
150
151
152       phc2sys_exec_t
153
154       -  Set files with the phc2sys_exec_t type, if you want to transition an
155       executable to the phc2sys_t domain.
156
157
158
159       phc2sys_unit_file_t
160
161       - Set files with the phc2sys_unit_file_t type, if you want to treat the
162       files as phc2sys unit content.
163
164
165
166       Note:  File context can be temporarily modified with the chcon command.
167       If you want to permanently change the file context you need to use  the
168       semanage fcontext command.  This will modify the SELinux labeling data‐
169       base.  You will need to use restorecon to apply the labels.
170
171

COMMANDS

173       semanage fcontext can also be used to manipulate default  file  context
174       mappings.
175
176       semanage  permissive  can  also  be used to manipulate whether or not a
177       process type is permissive.
178
179       semanage module can also be used to enable/disable/install/remove  pol‐
180       icy modules.
181
182       semanage boolean can also be used to manipulate the booleans
183
184
185       system-config-selinux is a GUI tool available to customize SELinux pol‐
186       icy settings.
187
188

AUTHOR

190       This manual page was auto-generated using sepolicy manpage .
191
192