1setroubleshoot_fixit_seSlEiLniunxu(x8)Policy setroubleshsoeottr_ofuibxlietshoot_fixit_selinux(8)
2
6 setroubleshoot_fixit_selinux - Security Enhanced Linux Policy for the
7 setroubleshoot_fixit processes
8
10 Security-Enhanced Linux secures the setroubleshoot_fixit processes via
11 flexible mandatory access control.
12 The setroubleshoot_fixit processes execute with the setrou‐
14 bleshoot_fixit_t SELinux type. You can check if you have these pro‐
15 cesses running by executing the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep setroubleshoot_fixit_t
20
24 The setroubleshoot_fixit_t SELinux type can be entered via the setrou‐
25 bleshoot_fixit_exec_t file type.
26 The default entrypoint paths for the setroubleshoot_fixit_t domain are
28 the following:
29 /usr/share/setroubleshoot/SetroubleshootFixit.py*
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 setroubleshoot_fixit policy is very flexible allowing users to setup
40 their setroubleshoot_fixit processes in as secure a method as possible.
41 The following process types are defined for setroubleshoot_fixit:
43 setroubleshoot_fixit_t
45 Note: semanage permissive -a setroubleshoot_fixit_t can be used to make
47 the process type setroubleshoot_fixit_t permissive. SELinux does not
48 deny access to permissive process types, but the AVC (SELinux denials)
49 messages are still generated.
50
53 SELinux policy is customizable based on least access required. setrou‐
54 bleshoot_fixit policy is extremely flexible and has several booleans
55 that allow you to manipulate the policy and run setroubleshoot_fixit
56 with the tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type setroubleshoot_fixit_t can manage files
76 labeled with the following file types. The paths listed are the
77 default paths for these file types. Note the processes UID still need
78 to have DAC permissions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108 root_t
110 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
112 /
113 /initrd
114 setroubleshoot_fixit_tmpfs_t
116
120 SELinux requires files to have an extended attribute to define the file
121 type.
122 You can see the context of a file using the -Z option to ls
124 Policy governs the access confined processes have to these files.
126 SELinux setroubleshoot_fixit policy is very flexible allowing users to
127 setup their setroubleshoot_fixit processes in as secure a method as
128 possible.
129 STANDARD FILE CONTEXT
131 SELinux defines the file context types for the setroubleshoot_fixit, if
133 you wanted to store files with these types in a diffent paths, you need
134 to execute the semanage command to sepecify alternate labeling and then
135 use restorecon to put the labels on disk.
136 semanage fcontext -a -t setroubleshoot_fixit_tmpfs_t '/srv/mysetrou‐
138 bleshoot_fixit_content(/.*)?'
139 restorecon -R -v /srv/mysetroubleshoot_fixit_content
140 Note: SELinux often uses regular expressions to specify labels that
142 match multiple files.
143 The following file types are defined for setroubleshoot_fixit:
145 setroubleshoot_fixit_exec_t
149 - Set files with the setroubleshoot_fixit_exec_t type, if you want to
151 transition an executable to the setroubleshoot_fixit_t domain.
152 setroubleshoot_fixit_tmp_t
156 - Set files with the setroubleshoot_fixit_tmp_t type, if you want to
158 store setroubleshoot fixit temporary files in the /tmp directories.
159 setroubleshoot_fixit_tmpfs_t
163 - Set files with the setroubleshoot_fixit_tmpfs_t type, if you want to
165 store setroubleshoot fixit files on a tmpfs file system.
166 Note: File context can be temporarily modified with the chcon command.
170 If you want to permanently change the file context you need to use the
171 semanage fcontext command. This will modify the SELinux labeling data‐
172 base. You will need to use restorecon to apply the labels.
173
176 semanage fcontext can also be used to manipulate default file context
177 mappings.
178 semanage permissive can also be used to manipulate whether or not a
180 process type is permissive.
181 semanage module can also be used to enable/disable/install/remove pol‐
183 icy modules.
184 semanage boolean can also be used to manipulate the booleans
186 system-config-selinux is a GUI tool available to customize SELinux pol‐
189 icy settings.
190
193 This manual page was auto-generated using sepolicy manpage .
194
197 selinux(8), setroubleshoot_fixit(8), semanage(8), restorecon(8),
198 chcon(1), sepolicy(8), setsebool(8)
199setroubleshoot_fixit 21-03-26 setroubleshoot_fixit_selinux(8)