1VGCFGBACKUP(8) System Manager's Manual VGCFGBACKUP(8)
2
6 vgcfgbackup - Backup volume group configuration(s)
7
9 vgcfgbackup
10 [ option_args ]
11 [ position_args ]
12
14 vgcfgbackup creates back up files containing metadata of VGs. If no
15 VGs are named, back up files are created for all VGs. See vgcfgrestore
16 for information on using the back up files.
17 In a default installation, each VG is backed up into a separate file
19 bearing the name of the VG in the directory /etc/lvm/backup.
20 To use an alternative back up file, use -f. In this case, when backing
22 up multiple VGs, the file name is treated as a template, with %s
23 replaced by the VG name.
24 NB. This DOES NOT back up the data content of LVs.
26 It may also be useful to regularly back up the files in /etc/lvm.
28
30 vgcfgbackup
31 [ -f|--file String ]
32 [ --foreign ]
33 [ --ignorelockingfailure ]
34 [ --readonly ]
35 [ --reportformat basic|json ]
36 [ COMMON_OPTIONS ]
37 [ VG ... ]
38 Common options for lvm:
40 [ -d|--debug ]
41 [ -h|--help ]
42 [ -q|--quiet ]
43 [ -t|--test ]
44 [ -v|--verbose ]
45 [ -y|--yes ]
46 [ --commandprofile String ]
47 [ --config String ]
48 [ --driverloaded y|n ]
49 [ --lockopt String ]
50 [ --longhelp ]
51 [ --nolocking ]
52 [ --profile String ]
53 [ --version ]
54
56 --commandprofile String
57 The command profile to use for command configuration. See
58 lvm.conf(5) for more information about profiles.
59 --config String
61 Config settings for the command. These override lvm.conf set‐
62 tings. The String arg uses the same format as lvm.conf, or may
63 use section/field syntax. See lvm.conf(5) for more information
64 about config.
65 -d|--debug ...
67 Set debug level. Repeat from 1 to 6 times to increase the detail
68 of messages sent to the log file and/or syslog (if configured).
69 --driverloaded y|n
71 If set to no, the command will not attempt to use device-mapper.
72 For testing and debugging.
73 -f|--file String
75 Write the backup to the named file. When backing up more than
76 one VG, the file name is treated as a template, and %s is
77 replaced by the VG name.
78 --foreign
80 Report/display foreign VGs that would otherwise be skipped. See
81 lvmsystemid(7) for more information about foreign VGs.
82 -h|--help
84 Display help text.
85 --ignorelockingfailure
87 Allows a command to continue with read-only metadata operations
88 after locking failures.
89 --lockopt String
91 Used to pass options for special cases to lvmlockd. See lvm‐
92 lockd(8) for more information.
93 --longhelp
95 Display long help text.
96 --nolocking
98 Disable locking.
99 --profile String
101 An alias for --commandprofile or --metadataprofile, depending on
102 the command.
103 -q|--quiet ...
105 Suppress output and log messages. Overrides --debug and --ver‐
106 bose. Repeat once to also suppress any prompts with answer
107 'no'.
108 --readonly
110 Run the command in a special read-only mode which will read on-
111 disk metadata without needing to take any locks. This can be
112 used to peek inside metadata used by a virtual machine image
113 while the virtual machine is running. No attempt will be made to
114 communicate with the device-mapper kernel driver, so this option
115 is unable to report whether or not LVs are actually in use.
116 --reportformat basic|json
118 Overrides current output format for reports which is defined
119 globally by the report/output_format setting in lvm.conf. basic
120 is the original format with columns and rows. If there is more
121 than one report per command, each report is prefixed with the
122 report name for identification. json produces report output in
123 JSON format. See lvmreport(7) for more information.
124 -t|--test
126 Run in test mode. Commands will not update metadata. This is
127 implemented by disabling all metadata writing but nevertheless
128 returning success to the calling function. This may lead to
129 unusual error messages in multi-stage operations if a tool
130 relies on reading back metadata it believes has changed but
131 hasn't.
132 -v|--verbose ...
134 Set verbose level. Repeat from 1 to 4 times to increase the
135 detail of messages sent to stdout and stderr.
136 --version
138 Display version information.
139 -y|--yes
141 Do not prompt for confirmation interactively but always assume
142 the answer yes. Use with extreme caution. (For automatic no,
143 see -qq.)
144
146 VG
147 Volume Group name. See lvm(8) for valid names.
148 String
150 See the option description for information about the string con‐
151 tent.
152 Size[UNIT]
154 Size is an input number that accepts an optional unit. Input
155 units are always treated as base two values, regardless of capi‐
156 talization, e.g. 'k' and 'K' both refer to 1024. The default
157 input unit is specified by letter, followed by |UNIT. UNIT rep‐
158 resents other possible input units: bBsSkKmMgGtTpPeE. b|B is
159 bytes, s|S is sectors of 512 bytes, k|K is kilobytes, m|M is
160 megabytes, g|G is gigabytes, t|T is terabytes, p|P is petabytes,
161 e|E is exabytes. (This should not be confused with the output
162 control --units, where capital letters mean multiple of 1000.)
163
165 See lvm(8) for information about environment variables used by lvm.
166 For example, LVM_VG_NAME can generally be substituted for a required VG
167 parameter.
168
170 lvm(8) lvm.conf(5) lvmconfig(8)
171 pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
173 pvresize(8) pvs(8) pvscan(8)
174 vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgcon‐
176 vert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8) vgimport‐
177 clone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8) vgrename(8)
178 vgs(8) vgscan(8) vgsplit(8)
179 lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvre‐
181 duce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
182 lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeacti‐
184 vate(8) lvmdump(8)
185 dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmd‐
187 busd(8)
188 lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
190Red Hat, Inc. LVM TOOLS 2.03.10(2) (2020-08-09) VGCFGBACKUP(8)