1
2FENCE_AGENT(8)              System Manager's Manual             FENCE_AGENT(8)
3
4
5

NAME

7       fence_intelmodular - Fence agent for Intel Modular
8

DESCRIPTION

10       fence_intelmodular is an I/O Fencing agent which can be used with Intel
11       Modular device (tested on Intel MFSYS25, should work  with  MFSYS35  as
12       well).
13
14       Note:  Since  firmware  update  version  2.7,  SNMP v2 write support is
15       removed, and replaced by SNMP v3 support. So agent now has default SNMP
16       version  3.  If you are using older firmware, please supply -d for com‐
17       mand line and snmp_version option for your cluster.conf.
18
19       fence_intelmodular accepts options on the command line as well as  from
20       stdin.  Fenced  sends parameters through stdin when it execs the agent.
21       fence_intelmodular can be run by  itself  with  command  line  options.
22       This  is  useful  for  testing  and  for turning outlets on or off from
23       scripts.
24
25       Vendor URL: http://www.intel.com
26

PARAMETERS

28
29
30       -o, --action=[action]
31              Fencing action (Default Value: reboot)
32
33       -c, --community=[community]
34              Set the community string
35
36       -a, --ip=[ip]
37              IP address or hostname  of  fencing  device  This  parameter  is
38              always required.
39
40       -u, --ipport=[port]
41              TCP/UDP  port  to use for connection with device (Default Value:
42              161)
43
44       -p, --password=[password]
45              Login password or passphrase
46
47       -S, --password-script=[script]
48              Script to run to retrieve password
49
50       -n, --plug=[id]
51              Physical plug  number  on  device,  UUID  or  identification  of
52              machine This parameter is always required.
53
54       -b, --snmp-auth-prot=[prot]
55              Set authentication protocol (MD5|SHA)
56
57       -P, --snmp-priv-passwd=[pass]
58              Set privacy protocol password
59
60       -R, --snmp-priv-passwd-script
61              Script to run to retrieve privacy password
62
63       -B, --snmp-priv-prot=[prot]
64              Set privacy protocol (DES|AES)
65
66       -E, --snmp-sec-level=[level]
67              Set security level (noAuthNoPriv|authNoPriv|authPriv)
68
69       -d, --snmp-version=[version]
70              Specifies SNMP version to use (1|2c|3)
71
72       -l, --username=[name]
73              Login name
74
75       -q, --quiet
76              Disable logging to stderr. Does not affect --verbose or --debug-
77              file or logging to syslog.
78
79       -v, --verbose
80              Verbose mode. Multiple -v flags can be stacked  on  the  command
81              line (e.g., -vvv) to increase verbosity.
82
83       --verbose-level
84              Level  of  debugging detail in output. Defaults to the number of
85              --verbose flags specified on the command line, or to 1  if  ver‐
86              bose=1  in  a  stonith  device  configuration  (i.e., on stdin).
87
88
89       -D, --debug-file=[debugfile]
90              Write debug information to given file
91
92       -V, --version
93              Display version information and exit
94
95       -h, --help
96              Display help and exit
97
98       -C, --separator=[char]
99              Separator for CSV created by 'list' operation (Default Value: ,)
100
101
102       --delay=[seconds]
103              Wait  X  seconds  before  fencing  is started (Default Value: 0)
104
105
106       --disable-timeout=[true/false]
107              Disable timeout (true/false) (default: true when run from  Pace‐
108              maker 2.0+)
109
110       --login-timeout=[seconds]
111              Wait  X  seconds  for  cmd prompt after login (Default Value: 5)
112
113
114       --power-timeout=[seconds]
115              Test X seconds for status change after  ON/OFF  (Default  Value:
116              20)
117
118       --power-wait=[seconds]
119              Wait X seconds after issuing ON/OFF (Default Value: 0)
120
121       --shell-timeout=[seconds]
122              Wait  X  seconds  for  cmd prompt after issuing command (Default
123              Value: 3)
124
125       --retry-on=[attempts]
126              Count of attempts to retry power on (Default Value: 1)
127
128       --snmpget-path=[path]
129              Path to snmpget binary (Default Value: /usr/bin/snmpget)
130
131       --snmpset-path=[path]
132              Path to snmpset binary (Default Value: /usr/bin/snmpset)
133
134       --snmpwalk-path=[path]
135              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
136
137

ACTIONS

139
140
141       on     Power on machine.
142
143       off    Power off machine.
144
145       reboot Reboot machine.
146
147       status This returns the status of the plug/virtual machine.
148
149       list   List available plugs with aliases/virtual machines if  there  is
150              support for more then one device. Returns N/A otherwise.
151
152       list-status
153              List  available  plugs  with  aliases/virtual machines and their
154              power state if it can be obtained without  additional  commands.
155
156
157       monitor
158              Check the health of fence device
159
160       metadata
161              Display the XML metadata describing this resource.
162
163       manpage
164               The operational behavior of this is not known.
165
166       validate-all
167              Validate if all required parameters are entered.
168
169

STDIN PARAMETERS

171
172
173       action Fencing action (Default Value: reboot)
174
175       community
176              Set the community string
177
178       ip     IP  address  or  hostname  of  fencing  device This parameter is
179              always required. Obsoletes: ipaddr
180
181       ipport TCP/UDP port to use for connection with device  (Default  Value:
182              161)
183
184       password
185              Login password or passphrase Obsoletes: passwd
186
187       password_script
188              Script  to  run  to  retrieve  password Obsoletes: passwd_script
189
190
191       plug   Physical plug  number  on  device,  UUID  or  identification  of
192              machine This parameter is always required. Obsoletes: port
193
194
195       snmp_auth_prot
196              Set authentication protocol (MD5|SHA)
197
198       snmp_priv_passwd
199              Set privacy protocol password
200
201       snmp_priv_passwd_script
202              Script to run to retrieve privacy password
203
204       snmp_priv_prot
205              Set privacy protocol (DES|AES)
206
207       snmp_sec_level
208              Set security level (noAuthNoPriv|authNoPriv|authPriv)
209
210       snmp_version
211              Specifies SNMP version to use (1|2c|3)
212
213       username
214              Login name Obsoletes: login
215
216       quiet  Disable logging to stderr. Does not affect --verbose or --debug-
217              file or logging to syslog.
218
219       verbose
220              Verbose  mode.  Multiple  -v flags can be stacked on the command
221              line (e.g., -vvv) to increase verbosity.
222
223       verbose_level
224              Level of debugging detail in output. Defaults to the  number  of
225              --verbose  flags  specified on the command line, or to 1 if ver‐
226              bose=1 in a  stonith  device  configuration  (i.e.,  on  stdin).
227
228
229       debug_file
230              Write debug information to given file Obsoletes: debug
231
232       version
233              Display version information and exit
234
235       help   Display help and exit
236
237       separator
238              Separator for CSV created by 'list' operation (Default Value: ,)
239
240
241       delay  Wait X seconds before fencing  is  started  (Default  Value:  0)
242
243
244       disable_timeout
245              Disable  timeout (true/false) (default: true when run from Pace‐
246              maker 2.0+)
247
248       login_timeout
249              Wait X seconds for cmd prompt after  login  (Default  Value:  5)
250
251
252       power_timeout
253              Test  X  seconds  for status change after ON/OFF (Default Value:
254              20)
255
256       power_wait
257              Wait X seconds after issuing ON/OFF (Default Value: 0)
258
259       shell_timeout
260              Wait X seconds for cmd prompt  after  issuing  command  (Default
261              Value: 3)
262
263       retry_on
264              Count of attempts to retry power on (Default Value: 1)
265
266       snmpget_path
267              Path to snmpget binary (Default Value: /usr/bin/snmpget)
268
269       snmpset_path
270              Path to snmpset binary (Default Value: /usr/bin/snmpset)
271
272       snmpwalk_path
273              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
274
275
276
277fence_intelmodular (Fence Agent)  2009-10-20                    FENCE_AGENT(8)