1RBM_INPUT_FILES(7) RBM_INPUT_FILES(7)
2
6 rbm_input_files - rbm input files configuration
7
9 When building a project with rbm, the input can be a git or mercurial
10 repository from which a tarball will be created and used as input for
11 your build. In addition or instead of this git or mercurial repository,
12 it is possible to retrieved files from other sources to use them as
13 input files.
14 The following input sources are available:
16 · a URL which should be used to download the file
18 · a file resulting from the output of a command
20 · the value of a config value
22 · the result of the build of an other project
24 The file that has been retrieved can be verified with:
26 · matching a specific sha256 checksum
28 · a gpg signature file from a specific key or keyring
30 The input files can be located in the output directory (for the result
32 of an other project’s build), or in the project’s directory.
33
35 The configuration of the input files is done in the input_files
36 configuration option. This option is an array of file descriptors. Each
37 file descriptor is an hash containing some of the following options:
38 filename
40 The name of the file that will be fetched. Except when an URL or a
41 project is set, this filename is mandatory. If it is not set when
42 an URL is set, the basename of the URL is used as a filename. If it
43 is not set when a project is set, the project’s filename option is
44 used. The filename can be the name of a directory, in which case
45 all the files from the directory are included.
46 name
48 Optionaly the input_file can have a name. This name is used as key
49 in the input_files_by_name option.
50 content
52 The content of the file.
53 URL
55 The URL from which to download the file.
56 exec
58 A command or script to execute to produce the file.
59 project
61 The name of an other project to build, to create the file. The
62 content of the file descriptor is used as options for the build of
63 this project. You can add config options such as version, git_hash
64 or target to configure the build. The build is run with an
65 equivalent of rbm pkg, so you should define the pkg_type option if
66 you want to select the type of build. The command line options are
67 not forwarded. The name of the current project is available to that
68 other project in the origin_project option.
69 target
71 An array defining the build targets for the selected project. If
72 this option is not set, the current build target is forwarded. If
73 set, this replaces the current targets.
74 target_append
76 The same as target, but instead of replacing the current targets,
77 the new targets are appended.
78 target_prepend
80 The same as target, but instead of replacing the current targets,
81 the new targets are prepended.
82 enable
84 The files are enabled by default. If this option is set to 0, then
85 the file is ignored.
86 refresh_input
88 By default, if the file is already present, it is not downloaded or
89 created again, except when an sha256sum is defined and the file
90 present is not matching. If this option is set to a true value, the
91 file will be removed and created again on each run, except when an
92 sha256sum is defined and the file present is matching.
93 sha256sum
95 The sha256 checksum of the file. The build will fail with an error
96 if the file does not match the expected sha256 checksum.
97 file_gpg_id
99 If this option is set to 1, the file is checked for a gpg
100 signature. If it is set to an other non zero value, or an array of
101 non zero values, those are expected to be the valid gpg key IDs.
102 The gpg_wrapper, gpg_keyring, gpg_keyring_dir, gpg_bin, gpg_args
103 options can be used to configure the gpg check. Those options can
104 be overriden in the file descriptor.
105 sig_ext
107 An array of file extensions for the gpg signature file. Those
108 extensions are used to find the signature file when file_gpg_id is
109 set. If the signature file is missing but an URL is set, the
110 extension is appended to the URL to try to download it. The default
111 value for sig_ext is gpg, asc, sig. The sig_ext can also be set to
112 a single value.
113 urlget
115 A command or script to be used to download files from an URL. It
116 should use filename as the output filename, and URL as the source
117 URL. The default is to use wget.
118 output_dir
120 By default, the files are searched in the project’s directory, and
121 its output directory. The generated files are stored in the
122 project’s output directory. If you want to store and search a file
123 in a different directory, you can set the output_dir option to a
124 different value.
125 All those options are templates, and can use other options defined
127 inside or outside the file descriptor. Their default values can be
128 defined outside the file descriptor.
129 Those options can also be defined per target, or per distribution.
131 Instead of a file descriptor hash, an element of the input_files array
133 can be a string. In that case the string is the name of the option
134 containing the file descriptor hash. This can be useful when you are
135 using the same file in multiple projects.
136
138 In the following example we define the input_files configuration for
139 the project bundle. This project has two different targets, dev and
140 stable, and is using input files from different sources :
141 · The project A tarball is downloaded from an URL with an known
143 sha256sum.
144 · The project B tarball is downloaded from an URL which is different
146 depending on the target. The sha256sum is also different depending
147 on the target.
148 · The project C tarball is downloaded from an URL, and checked using
150 a gpg signature.
151 · The project D tarball is built using rbm. The git_hash used to
153 build it is different depending on the target. The git tag gpg
154 signature is checked only in the stable target.
155 input_files:
157 - filename: project-A.tar.gz
158 URL: http://www.project-a.org/project.tar.gz
159 sha256sum: 93c4fb2f3d377f41001fe1cf3c806dc9fc926a53dbbf4302838d7ee7c9f17315
160 - filename: 'project-B-[% c('project_b_version') %].tar.gz'
161 URL: 'http://www.project-b.org/project-b-[% c('project_b_version') %].tar.gz'
162 targets:
163 dev:
164 project_b_version: 0.12
165 sha256sum: 5f0ac48598c0a7948bb7da626b0599f121c1365ec53b111b5ba9e9330410fc44
166 stable:
167 project_b_version: 0.10
168 sha256sum: f0f81fbc84992c21bbbcb301c1185ce3d1772f150f57d37530cc9e4b0249a630
169 - filename: project-c.tar.gz
170 URL: http://www.project-c.org/release-0.1.tar.gz
171 file_gpg_id: 1
172 gpg_keyring: project-c.gpg
173 sig_ext: sig
174 - filename: project-D.tar.gz
175 project: project_d
176 pkg_type: build
177 targets:
178 dev:
179 git_hash: master
180 stable:
181 git_hash: 2.1
182 tag_gpg_id: 1
183
185 rbm(1), rbm_config(7)
186 07/29/2020 RBM_INPUT_FILES(7)