10xFFFF(1) General Commands Manual 0xFFFF(1)
2
6 0xFFFF - Open Free Fiasco Firmware Flasher, version 0.9
7
10 0xFFFF [options]
11
14 0xFFFF is Open Free Fiasco Firmware Flasher for Maemo devices. It sup‐
15 port generating and unpacking FIASCO images on local computer. Useful
16 for editing Maemo firmware package for future flash. It support via USB
17 flashing any image type to Maemo device and also "cold" flashing which
18 means flashing dead device with erased bootloader. There is support for
19 booting kernel via USB without flashing to NAND and also changing con‐
20 figuration of Maemo device (enable/disable R&D mode, changing HW revi‐
21 sion strings, ...).
22 0xFFFF is alternative tool to proprietary Nokia flasher-3.5 and fiasco-
24 gen. 0xFFFF generate compatible FIASCO images and also accept FIASCO
25 images generated by Nokia fiasco-gen.
26
29 -b [cmdline]
30 boot default or loaded kernel (default: no cmdline)
31 -b update
33 boot default or loaded kernel to Update mode
34 -r reboot device
36 -l load kernel and initfs images to RAM
38 -f flash all specified images
40 -c cold flash 2nd and secondary images
42 -x [/dev/mtd]
44 check for bad blocks on mtd device (default: all)
45 -E file
47 dump all device images to one fiasco image
48 -e [dir]
50 dump all device images (or one -t) to directory (default: cur‐
51 rent)
52
55 -I identify, show all information about device
56 -D 0|1|2
58 change root device: 0 - flash, 1 - mmc, 2 - usb
59 -U 0|1 disable/enable USB host mode
61 -R 0|1 disable/enable R&D mode
63 -F flags
65 change R&D flags, flags are comma separated list, can be empty
66 -H rev change HW revision
68 -N ver change NOLO version string
70 -K ver change kernel version string
72 -T ver change initfs version string
74 -S ver change SW release version string
76 -C ver change content eMMC version string
78
81 -M file
82 specify fiasco image
83 -m arg specify normal image
85 arg is [[[dev:[hw:]]ver:]type:]file[%lay]
86 dev is device name string (default: empty)
87 hw are comma separated list of HW revisions (default: empty)
88 ver is image version string (default: empty)
89 type is image type (default: autodetect)
90 file is image file name
91 lay is layout file name (default: none)
92
95 -t type
96 filter images by type
97 -d dev filter images by device
99 -w hw filter images by HW revision
101
104 -u [dir]
105 unpack fiasco image to directory (default: current)
106 -g file[%sw]
108 generate fiasco image with SW rel version (default: no version)
109
112 -i identify images
113 -s simulate, do not flash or write on disk
115 -n disable hash, checksum and image type checking
117 -v be verbose and noisy
119 -h show this help message
121
124 no-omap-wd
125 disable auto reboot by OMAP watchdog
126 no-ext-wd
128 disable auto reboot by external watchdog
129 no-lifeguard-reset
131 disable auto reboot by software lifeguard
132 serial-console
134 enable serial console
135 no-usb-timeout
137 disable usb timeout for flashing
138 sti-console
140 enable sti console
141 no-charging
143 disable battery charging
144 force-power-key
146 force omap boot reason to power key
147
150 SU-18 Nokia 770
151 RX-34 Nokia N800
153 RX-44 Nokia N810
155 RX-48 Nokia N810 Wimax
157 RX-51 Nokia N900
159 RM-680 Nokia N950
161 RM-696 Nokia N9
163
166 xloader
167 2nd
168 secondary
169 kernel
170 initfs
171 rootfs
172 mmc
173 cmt-2nd
174 cmt-algo
175 cmt-mcusw
176
179 Local on device
180 NOLO via USB
181 Cold flashing via USB
182 Mk II protocol via USB
183 RAW disk via USB
184
186 Via USB:
187 Identify device:
189 $ 0xFFFF -I
190 Load kernel & initfs and boot it with cmdline:
192 $ 0xFFFF -m initfs:<file> -m kernel:<file> -l -b "<cmdline>"
193 Flash kernel and reboot:
195 $ 0xFFFF -m kernel:<file> -f -r
196 Flash FIASCO image and reboot:
198 $ 0xFFFF -M <file> -f -r
199 Flash only kernel from FIASCO image and reboot:
201 $ 0xFFFF -M <file> -t kernel -f -r
202 Cold-Flash 2nd and secondary bootloaders:
204 $ 0xFFFF -m 2nd:<file> -m secondary:<file> -c
205 On device (need nanddump from mtd-utils):
207 Dump all images to current directory:
209 $ 0xFFFF -e
210 Dump all images to one FIASCO file:
212 $ 0xFFFF -E <file>
213 FIASCO packaging:
215 Show FIASCO image content:
217 $ 0xFFFF -M <file> -i
218 Unpack FIASCO image to current directory:
220 $ 0xFFFF -M <file> -u
221 Generate new FIASCO image image.fiasco from files xloader.bin,
223 nolo.bin, zImage, rootfs and append device&version information (xloader
224 for RX-51 hw revision: 2101 and 2102, version 1.0)
225 $ 0xFFFF -m RX-51:2101,2102:1.0:xloader:xloader.bin -m RX-51:2101,2102:1.0:secondary:nolo.bin -m 2.6.28:kernel:zImage -m rootfs -g image.fiasco
2260xFFFF 0.9 Jan 25 2021 0xFFFF(1)