1dpkg-source(1) dpkg suite dpkg-source(1)
2
6 dpkg-source - Debian source package (.dsc) manipulation tool
7
9 dpkg-source [option...] command
10
12 dpkg-source packs and unpacks Debian source archives.
13 None of these commands allow multiple options to be combined into one,
15 and they do not allow the value for an option to be specified in a
16 separate argument.
17
19 -x, --extract filename.dsc [output-directory]
20 Extract a source package (--extract since dpkg 1.17.14). One non-
21 option argument must be supplied, the name of the Debian source
22 control file (.dsc). An optional second non-option argument may be
23 supplied to specify the directory to extract the source package to,
24 this must not exist. If no output directory is specified, the
25 source package is extracted into a directory named source-version
26 under the current working directory.
27 dpkg-source will read the names of the other file(s) making up the
29 source package from the control file; they are assumed to be in the
30 same directory as the .dsc.
31 The files in the extracted package will have their permissions and
33 ownerships set to those which would have been expected if the files
34 and directories had simply been created - directories and
35 executable files will be 0777 and plain files will be 0666, both
36 modified by the extractors' umask; if the parent directory is
37 setgid then the extracted directories will be too, and all the
38 files and directories will inherit its group ownership.
39 If the source package uses a non-standard format (currently this
41 means all formats except “1.0”), its name will be stored in
42 debian/source/format so that the following builds of the source
43 package use the same format by default.
44 -b, --build directory [format-specific-parameters]
46 Build a source package (--build since dpkg 1.17.14). The first
47 non-option argument is taken as the name of the directory
48 containing the debianized source tree (i.e. with a debian sub-
49 directory and maybe changes to the original files). Depending on
50 the source package format used to build the package, additional
51 parameters might be accepted.
52 dpkg-source will build the source package with the first format
54 found in this ordered list: the format indicated with the --format
55 command line option, the format indicated in debian/source/format,
56 “1.0”. The fallback to “1.0” is deprecated and will be removed at
57 some point in the future, you should always document the desired
58 source format in debian/source/format. See section SOURCE PACKAGE
59 FORMATS for an extensive description of the various source package
60 formats.
61 --print-format directory
63 Print the source format that would be used to build the source
64 package if dpkg-source --build directory was called (in the same
65 conditions and with the same parameters; since dpkg 1.15.5).
66 --before-build directory
68 Run the corresponding hook of the source package format (since dpkg
69 1.15.8). This hook is called before any build of the package
70 (dpkg-buildpackage calls it very early even before debian/rules
71 clean). This command is idempotent and can be called multiple
72 times. Not all source formats implement something in this hook, and
73 those that do usually prepare the source tree for the build for
74 example by ensuring that the Debian patches are applied.
75 --after-build directory
77 Run the corresponding hook of the source package format (since dpkg
78 1.15.8). This hook is called after any build of the package (dpkg-
79 buildpackage calls it last). This command is idempotent and can be
80 called multiple times. Not all source formats implement something
81 in this hook, and those that do usually use it to undo what
82 --before-build has done.
83 --commit [directory] ...
85 Record changes in the source tree unpacked in directory (since dpkg
86 1.16.1). This command can take supplementary parameters depending
87 on the source format. It will error out for formats where this
88 operation doesn't mean anything.
89 -?, --help
91 Show the usage message and exit. The format specific build and
92 extract options can be shown by using the --format option.
93 --version
95 Show the version and exit.
96
98 Generic build options
99 -ccontrol-file
100 Specifies the main source control file to read information from.
101 The default is debian/control. If given with relative pathname
102 this is interpreted starting at the source tree's top level
103 directory.
104 -lchangelog-file
106 Specifies the changelog file to read information from. The default
107 is debian/changelog. If given with relative pathname this is
108 interpreted starting at the source tree's top level directory.
109 -Fchangelog-format
111 Specifies the format of the changelog. See dpkg-parsechangelog(1)
112 for information about alternative formats.
113 --format=value
115 Use the given format for building the source package (since dpkg
116 1.14.17). It does override any format given in
117 debian/source/format.
118 -Vname=value
120 Set an output substitution variable. See deb-substvars(5) for a
121 discussion of output substitution.
122 -Tsubstvars-file
124 Read substitution variables in substvars-file; the default is to
125 not read any file. This option can be used multiple times to read
126 substitution variables from multiple files (since dpkg 1.15.6).
127 -Dfield=value
129 Override or add an output control file field.
130 -Ufield
132 Remove an output control file field.
133 -Zcompression, --compression=compression
135 Specify the compression to use for created tarballs and diff files
136 (--compression since dpkg 1.15.5). Note that this option will not
137 cause existing tarballs to be recompressed, it only affects new
138 files. Supported values are: gzip, bzip2, lzma and xz. The default
139 is xz for formats 2.0 and newer, and gzip for format 1.0. xz is
140 only supported since dpkg 1.15.5.
141 -zlevel, --compression-level=level
143 Compression level to use (--compression-level since dpkg 1.15.5).
144 As with -Z it only affects newly created files. Supported values
145 are: 1 to 9, best, and fast. The default is 9 for gzip and bzip2,
146 6 for xz and lzma.
147 -i[regex], --diff-ignore[=regex]
149 You may specify a perl regular expression to match files you want
150 filtered out of the list of files for the diff (--diff-ignore since
151 dpkg 1.15.6). (This list is generated by a find command.) (If the
152 source package is being built as a version 3 source package using a
153 VCS, this can be used to ignore uncommitted changes on specific
154 files. Using -i.* will ignore all of them.)
155 The -i option by itself enables this setting with a default regex
157 (preserving any modification to the default regex done by a
158 previous use of --extend-diff-ignore) that will filter out control
159 files and directories of the most common revision control systems,
160 backup and swap files and Libtool build output directories. There
161 can only be one active regex, of multiple -i options only the last
162 one will take effect.
163 This is very helpful in cutting out extraneous files that get
165 included in the diff, e.g. if you maintain your source in a
166 revision control system and want to use a checkout to build a
167 source package without including the additional files and
168 directories that it will usually contain (e.g. CVS/, .cvsignore,
169 .svn/). The default regex is already very exhaustive, but if you
170 need to replace it, please note that by default it can match any
171 part of a path, so if you want to match the begin of a filename or
172 only full filenames, you will need to provide the necessary anchors
173 (e.g. ‘(^|/)’, ‘($|/)’) yourself.
174 --extend-diff-ignore=regex
176 The perl regular expression specified will extend the default value
177 used by --diff-ignore and its current value, if set (since dpkg
178 1.15.6). It does this by concatenating “|regex” to the existing
179 value. This option is convenient to use in debian/source/options
180 to exclude some auto-generated files from the automatic patch
181 generation.
182 -I[file-pattern], --tar-ignore[=file-pattern]
184 If this option is specified, the pattern will be passed to tar(1)'s
185 --exclude option when it is called to generate a .orig.tar or .tar
186 file (--tar-ignore since dpkg 1.15.6). For example, -ICVS will
187 make tar skip over CVS directories when generating a .tar.gz file.
188 The option may be repeated multiple times to list multiple patterns
189 to exclude.
190 -I by itself adds default --exclude options that will filter out
192 control files and directories of the most common revision control
193 systems, backup and swap files and Libtool build output
194 directories.
195 Note: While they have similar purposes, -i and -I have very different
197 syntax and semantics. -i can only be specified once and takes a perl
198 compatible regular expression which is matched against the full
199 relative path of each file. -I can specified multiple times and takes a
200 filename pattern with shell wildcards. The pattern is applied to the
201 full relative path but also to each part of the path individually. The
202 exact semantic of tar's --exclude option is somewhat complicated, see
203 <https://www.gnu.org/software/tar/manual/tar.html#wildcards> for a full
204 documentation.
205 The default regex and patterns for both options can be seen in the
207 output of the --help command.
208 Generic extract options
210 --no-copy
211 Do not copy original tarballs near the extracted source package
212 (since dpkg 1.14.17).
213 --no-check
215 Do not check signatures and checksums before unpacking (since dpkg
216 1.14.17).
217 --no-overwrite-dir
219 Do not overwrite the extraction directory if it already exists
220 (since dpkg 1.18.8).
221 --require-valid-signature
223 Refuse to unpack the source package if it doesn't contain an
224 OpenPGP signature that can be verified (since dpkg 1.15.0) either
225 with the user's trustedkeys.gpg keyring, one of the vendor-specific
226 keyrings, or one of the official Debian keyrings
227 (/usr/share/keyrings/debian-keyring.gpg,
228 /usr/share/keyrings/debian-nonupload.gpg and
229 /usr/share/keyrings/debian-maintainers.gpg).
230 --require-strong-checksums
232 Refuse to unpack the source package if it does not contain any
233 strong checksums (since dpkg 1.18.7). Currently the only known
234 checksum considered strong is SHA-256.
235 --ignore-bad-version
237 Turns the bad source package version check into a non-fatal warning
238 (since dpkg 1.17.7). This option should only be necessary when
239 extracting ancient source packages with broken versions, just for
240 backwards compatibility.
241
243 If you don't know what source format to use, you should probably pick
244 either “3.0 (quilt)” or “3.0 (native)”. See
245 <https://wiki.debian.org/Projects/DebSrc3.0> for information on the
246 deployment of those formats within Debian.
247 Format: 1.0
249 A source package in this format consists either of a .orig.tar.gz
250 associated to a .diff.gz or a single .tar.gz (in that case the package
251 is said to be native). Optionally the original tarball might be
252 accompanied by a detached upstream signature .orig.tar.gz.asc,
253 extraction supported since dpkg 1.18.5.
254 Extracting
256 Extracting a native package is a simple extraction of the single
258 tarball in the target directory. Extracting a non-native package is
259 done by first unpacking the .orig.tar.gz and then applying the patch
260 contained in the .diff.gz file. The timestamp of all patched files is
261 reset to the extraction time of the source package (this avoids
262 timestamp skews leading to problems when autogenerated files are
263 patched). The diff can create new files (the whole debian directory is
264 created that way) but cannot remove files (empty files will be left
265 over) and cannot create or change symlinks.
266 Building
268 Building a native package is just creating a single tarball with the
270 source directory. Building a non-native package involves extracting the
271 original tarball in a separate “.orig” directory and regenerating the
272 .diff.gz by comparing the source package directory with the .orig
273 directory.
274 Build options (with --build):
276 If a second non-option argument is supplied it should be the name of
278 the original source directory or tarfile or the empty string if the
279 package is a Debian-specific one and so has no debianization diffs. If
280 no second argument is supplied then dpkg-source will look for the
281 original source tarfile package_upstream-version.orig.tar.gz or the
282 original source directory directory.orig depending on the -sX
283 arguments.
284 -sa, -sp, -sk, -su and -sr will not overwrite existing tarfiles or
286 directories. If this is desired then -sA, -sP, -sK, -sU and -sR should
287 be used instead.
288 -sk Specifies to expect the original source as a tarfile, by default
290 package_upstream-version.orig.tar.extension. It will leave this
291 original source in place as a tarfile, or copy it to the current
292 directory if it isn't already there. The tarball will be unpacked
293 into directory.orig for the generation of the diff.
294 -sp Like -sk but will remove the directory again afterwards.
296 -su Specifies that the original source is expected as a directory, by
298 default package-upstream-version.orig and dpkg-source will create a
299 new original source archive from it.
300 -sr Like -su but will remove that directory after it has been used.
302 -ss Specifies that the original source is available both as a directory
304 and as a tarfile. dpkg-source will use the directory to create the
305 diff, but the tarfile to create the .dsc. This option must be used
306 with care - if the directory and tarfile do not match a bad source
307 archive will be generated.
308 -sn Specifies to not look for any original source, and to not generate
310 a diff. The second argument, if supplied, must be the empty
311 string. This is used for Debian-specific packages which do not have
312 a separate upstream source and therefore have no debianization
313 diffs.
314 -sa or -sA
316 Specifies to look for the original source archive as a tarfile or
317 as a directory - the second argument, if any, may be either, or the
318 empty string (this is equivalent to using -sn). If a tarfile is
319 found it will unpack it to create the diff and remove it afterwards
320 (this is equivalent to -sp); if a directory is found it will pack
321 it to create the original source and remove it afterwards (this is
322 equivalent to -sr); if neither is found it will assume that the
323 package has no debianization diffs, only a straightforward source
324 archive (this is equivalent to -sn). If both are found then dpkg-
325 source will ignore the directory, overwriting it, if -sA was
326 specified (this is equivalent to -sP) or raise an error if -sa was
327 specified. -sa is the default.
328 --abort-on-upstream-changes
330 The process fails if the generated diff contains changes to files
331 outside of the debian sub-directory (since dpkg 1.15.8). This
332 option is not allowed in debian/source/options but can be used in
333 debian/source/local-options.
334 Extract options (with --extract):
336 In all cases any existing original source tree will be removed.
338 -sp Used when extracting then the original source (if any) will be left
340 as a tarfile. If it is not already located in the current directory
341 or if an existing but different file is there it will be copied
342 there. (This is the default).
343 -su Unpacks the original source tree.
345 -sn Ensures that the original source is neither copied to the current
347 directory nor unpacked. Any original source tree that was in the
348 current directory is still removed.
349 All the -sX options are mutually exclusive. If you specify more than
351 one only the last one will be used.
352 --skip-debianization
354 Skips application of the debian diff on top of the upstream sources
355 (since dpkg 1.15.1).
356 Format: 2.0
358 Extraction supported since dpkg 1.13.9, building supported since dpkg
359 1.14.8. Also known as wig&pen. This format is not recommended for
360 wide-spread usage, the format “3.0 (quilt)” replaces it. Wig&pen was
361 the first specification of a new-generation source package format.
362 The behaviour of this format is the same as the “3.0 (quilt)” format
364 except that it doesn't use an explicit list of patches. All files in
365 debian/patches/ matching the perl regular expression [\w-]+ must be
366 valid patches: they are applied at extraction time.
367 When building a new source package, any change to the upstream source
369 is stored in a patch named zz_debian-diff-auto.
370 Format: 3.0 (native)
372 Supported since dpkg 1.14.17. This format is an extension of the
373 native package format as defined in the 1.0 format. It supports all
374 compression methods and will ignore by default any VCS specific files
375 and directories as well as many temporary files (see default value
376 associated to -I option in the --help output).
377 Format: 3.0 (quilt)
379 Supported since dpkg 1.14.17. A source package in this format contains
380 at least an original tarball (.orig.tar.ext where ext can be gz, bz2,
381 lzma and xz) and a debian tarball (.debian.tar.ext). It can also
382 contain additional original tarballs (.orig-component.tar.ext).
383 component can only contain alphanumeric (‘a-zA-Z0-9’) characters and
384 hyphens (‘-’). Optionally each original tarball can be accompanied by
385 a detached upstream signature (.orig.tar.ext.asc and
386 .orig-component.tar.ext.asc), extraction supported since dpkg 1.17.20,
387 building supported since dpkg 1.18.5.
388 Extracting
390 The main original tarball is extracted first, then all additional
392 original tarballs are extracted in subdirectories named after the
393 component part of their filename (any pre-existing directory is
394 replaced). The debian tarball is extracted on top of the source
395 directory after prior removal of any pre-existing debian directory.
396 Note that the debian tarball must contain a debian sub-directory but it
397 can also contain binary files outside of that directory (see
398 --include-binaries option).
399 All patches listed in debian/patches/vendor.series or
401 debian/patches/series are then applied, where vendor will be the
402 lowercase name of the current vendor, or debian if there is no vendor
403 defined. If the former file is used and the latter one doesn't exist
404 (or is a symlink), then the latter is replaced with a symlink to the
405 former. This is meant to simplify usage of quilt to manage the set of
406 patches. Vendor-specific series files are intended to make it possible
407 to serialize multiple development branches based on the vendor, in a
408 declarative way, in preference to open-coding this handling in
409 debian/rules. This is particularly useful when the source would need
410 to be patched conditionally because the affected files do not have
411 built-in conditional occlusion support. Note however that while dpkg-
412 source parses correctly series files with explicit options used for
413 patch application (stored on each line after the patch filename and one
414 or more spaces), it does ignore those options and always expects
415 patches that can be applied with the -p1 option of patch. It will thus
416 emit a warning when it encounters such options, and the build is likely
417 to fail.
418 Note that lintian(1) will emit unconditional warnings when using vendor
420 series due to a controversial Debian specific ruling, which should not
421 affect any external usage; to silence these, the dpkg lintian profile
422 can be used by passing «--profile dpkg» to lintian(1).
423 The timestamp of all patched files is reset to the extraction time of
425 the source package (this avoids timestamp skews leading to problems
426 when autogenerated files are patched).
427 Contrary to quilt's default behaviour, patches are expected to apply
429 without any fuzz. When that is not the case, you should refresh such
430 patches with quilt, or dpkg-source will error out while trying to apply
431 them.
432 Similarly to quilt's default behaviour, the patches can remove files
434 too.
435 The file .pc/applied-patches is created if some patches have been
437 applied during the extraction.
438 Building
440 All original tarballs found in the current directory are extracted in a
442 temporary directory by following the same logic as for the unpack, the
443 debian directory is copied over in the temporary directory, and all
444 patches except the automatic patch (debian-changes-version or debian-
445 changes, depending on --single-debian-patch) are applied. The temporary
446 directory is compared to the source package directory. When the diff is
447 non-empty, the build fails unless --single-debian-patch or
448 --auto-commit has been used, in which case the diff is stored in the
449 automatic patch. If the automatic patch is created/deleted, it's
450 added/removed from the series file and from the quilt metadata.
451 Any change on a binary file is not representable in a diff and will
453 thus lead to a failure unless the maintainer deliberately decided to
454 include that modified binary file in the debian tarball (by listing it
455 in debian/source/include-binaries). The build will also fail if it
456 finds binary files in the debian sub-directory unless they have been
457 allowed through debian/source/include-binaries.
458 The updated debian directory and the list of modified binaries is then
460 used to generate the debian tarball.
461 The automatically generated diff doesn't include changes on VCS
463 specific files as well as many temporary files (see default value
464 associated to -i option in the --help output). In particular, the .pc
465 directory used by quilt is ignored during generation of the automatic
466 patch.
467 Note: dpkg-source --before-build (and --build) will ensure that all
469 patches listed in the series file are applied so that a package build
470 always has all patches applied. It does this by finding unapplied
471 patches (they are listed in the series file but not in
472 .pc/applied-patches), and if the first patch in that set can be applied
473 without errors, it will apply them all. The option --no-preparation can
474 be used to disable this behavior.
475 Recording changes
477 --commit [directory] [patch-name] [patch-file]
479 Generates a patch corresponding to the local changes that are not
480 managed by the quilt patch system and integrates it in the patch
481 system under the name patch-name. If the name is missing, it will
482 be asked interactively. If patch-file is given, it is used as the
483 patch corresponding to the local changes to integrate. Once
484 integrated, an editor is launched so that you can edit the meta-
485 information in the patch header.
486 Passing patch-file is mainly useful after a build failure that pre-
488 generated this file, and on this ground the given file is removed
489 after integration. Note also that the changes contained in the
490 patch file must already be applied on the tree and that the files
491 modified by the patch must not have supplementary unrecorded
492 changes.
493 If the patch generation detects modified binary files, they will be
495 automatically added to debian/source/include-binaries so that they
496 end up in the debian tarball (exactly like dpkg-source
497 --include-binaries --build would do).
498 Build options
500 --allow-version-of-quilt-db=version
502 Allow dpkg-source to build the source package if the version of the
503 quilt metadata is the one specified, even if dpkg-source doesn't
504 know about it (since dpkg 1.15.5.4). Effectively this says that
505 the given version of the quilt metadata is compatible with the
506 version 2 that dpkg-source currently supports. The version of the
507 quilt metadata is stored in .pc/.version.
508 --include-removal
510 Do not ignore removed files and include them in the automatically
511 generated patch.
512 --include-timestamp
514 Include timestamp in the automatically generated patch.
515 --include-binaries
517 Add all modified binaries in the debian tarball. Also add them to
518 debian/source/include-binaries: they will be added by default in
519 subsequent builds and this option is thus no more needed.
520 --no-preparation
522 Do not try to prepare the build tree by applying patches which are
523 apparently unapplied (since dpkg 1.14.18).
524 --single-debian-patch
526 Use debian/patches/debian-changes instead of
527 debian/patches/debian-changes-version for the name of the automatic
528 patch generated during build (since dpkg 1.15.5.4). This option is
529 particularly useful when the package is maintained in a VCS and a
530 patch set can't reliably be generated. Instead the current diff
531 with upstream should be stored in a single patch. The option would
532 be put in debian/source/local-options and would be accompanied by a
533 debian/source/local-patch-header file explaining how the Debian
534 changes can be best reviewed, for example in the VCS that is used.
535 --create-empty-orig
537 Automatically create the main original tarball as empty if it's
538 missing and if there are supplementary original tarballs (since
539 dpkg 1.15.6). This option is meant to be used when the source
540 package is just a bundle of multiple upstream software and where
541 there's no “main” software.
542 --no-unapply-patches, --unapply-patches
544 By default, dpkg-source will automatically unapply the patches in
545 the --after-build hook if it did apply them during --before-build
546 (--unapply-patches since dpkg 1.15.8, --no-unapply-patches since
547 dpkg 1.16.5). Those options allow you to forcefully disable or
548 enable the patch unapplication process. Those options are only
549 allowed in debian/source/local-options so that all generated source
550 packages have the same behavior by default.
551 --abort-on-upstream-changes
553 The process fails if an automatic patch has been generated (since
554 dpkg 1.15.8). This option can be used to ensure that all changes
555 were properly recorded in separate quilt patches prior to the
556 source package build. This option is not allowed in
557 debian/source/options but can be used in
558 debian/source/local-options.
559 --auto-commit
561 The process doesn't fail if an automatic patch has been generated,
562 instead it's immediately recorded in the quilt series.
563 Extract options
565 --skip-debianization
567 Skips extraction of the debian tarball on top of the upstream
568 sources (since dpkg 1.15.1).
569 --skip-patches
571 Do not apply patches at the end of the extraction (since dpkg
572 1.14.18).
573 Format: 3.0 (custom)
575 Supported since dpkg 1.14.17. This format is special. It doesn't
576 represent a real source package format but can be used to create source
577 packages with arbitrary files.
578 Build options
580 All non-option arguments are taken as files to integrate in the
582 generated source package. They must exist and are preferably in the
583 current directory. At least one file must be given.
584 --target-format=value
586 Required. Defines the real format of the generated source package.
587 The generated .dsc file will contain this value in its Format field
588 and not “3.0 (custom)”.
589 Format: 3.0 (git)
591 Supported since dpkg 1.14.17. This format is experimental.
592 A source package in this format consists of a single bundle of a git
594 repository .git to hold the source of a package. There may also be a
595 .gitshallow file listing revisions for a shallow git clone.
596 Extracting
598 The bundle is cloned as a git repository to the target directory. If
600 there is a gitshallow file, it is installed as .git/shallow inside the
601 cloned git repository.
602 Note that by default the new repository will have the same branch
604 checked out that was checked out in the original source. (Typically
605 “master”, but it could be anything.) Any other branches will be
606 available under remotes/origin/.
607 Building
609 Before going any further, some checks are done to ensure that we don't
611 have any non-ignored uncommitted changes.
612 git-bundle(1) is used to generate a bundle of the git repository. By
614 default, all branches and tags in the repository are included in the
615 bundle.
616 Build options
618 --git-ref=ref
620 Allows specifying a git ref to include in the git bundle. Use
621 disables the default behavior of including all branches and tags.
622 May be specified multiple times. The ref can be the name of a
623 branch or tag to include. It may also be any parameter that can be
624 passed to git-rev-list(1). For example, to include only the master
625 branch, use --git-ref=master. To include all tags and branches,
626 except for the private branch, use --git-ref=--all
627 --git-ref=^private
628 --git-depth=number
630 Creates a shallow clone with a history truncated to the specified
631 number of revisions.
632 Format: 3.0 (bzr)
634 Supported since dpkg 1.14.17. This format is experimental. It
635 generates a single tarball containing the bzr repository.
636 Extracting
638 The tarball is unpacked and then bzr is used to checkout the current
640 branch.
641 Building
643 Before going any further, some checks are done to ensure that we don't
645 have any non-ignored uncommitted changes.
646 Then the VCS specific part of the source directory is copied over to a
648 temporary directory. Before this temporary directory is packed in a
649 tarball, various cleanup are done to save space.
650
652 no source format specified in debian/source/format
653 The file debian/source/format should always exist and indicate the
654 desired source format. For backwards compatibility, format “1.0” is
655 assumed when the file doesn't exist but you should not rely on this: at
656 some point in the future dpkg-source will be modified to fail when that
657 file doesn't exist.
658 The rationale is that format “1.0” is no longer the recommended format,
660 you should usually pick one of the newer formats (“3.0 (quilt)”, “3.0
661 (native)”) but dpkg-source will not do this automatically for you. If
662 you want to continue using the old format, you should be explicit about
663 it and put “1.0” in debian/source/format.
664 the diff modifies the following upstream files
666 When using source format “1.0” it is usually a bad idea to modify
667 upstream files directly as the changes end up hidden and mostly
668 undocumented in the .diff.gz file. Instead you should store your
669 changes as patches in the debian directory and apply them at build-
670 time. To avoid this complexity you can also use the format “3.0
671 (quilt)” that offers this natively.
672 cannot represent change to file
674 Changes to upstream sources are usually stored with patch files, but
675 not all changes can be represented with patches: they can only alter
676 the content of plain text files. If you try replacing a file with
677 something of a different type (for example replacing a plain file with
678 a symlink or a directory), you will get this error message.
679 newly created empty file file will not be represented in diff
681 Empty files can't be created with patch files. Thus this change is not
682 recorded in the source package and you are warned about it.
683 executable mode perms of file will not be represented in diff
685 Patch files do not record permissions of files and thus executable
686 permissions are not stored in the source package. This warning reminds
687 you of that fact.
688 special mode perms of file will not be represented in diff
690 Patch files do not record permissions of files and thus modified
691 permissions are not stored in the source package. This warning reminds
692 you of that fact.
693
695 DPKG_COLORS
696 Sets the color mode (since dpkg 1.18.5). The currently accepted
697 values are: auto (default), always and never.
698 DPKG_NLS
700 If set, it will be used to decide whether to activate Native
701 Language Support, also known as internationalization (or i18n)
702 support (since dpkg 1.19.0). The accepted values are: 0 and 1
703 (default).
704 SOURCE_DATE_EPOCH
706 If set, it will be used as the timestamp (as seconds since the
707 epoch) to clamp the mtime in the tar(5) file entries.
708 VISUAL
710 EDITOR
711 Used by the “2.0” and “3.0 (quilt)” source format modules.
712 GIT_DIR
714 GIT_INDEX_FILE
715 GIT_OBJECT_DIRECTORY
716 GIT_ALTERNATE_OBJECT_DIRECTORIES
717 GIT_WORK_TREE
718 Used by the “3.0 (git)” source format modules.
719
721 debian/source/format
722 This file contains on a single line the format that should be used to
723 build the source package (possible formats are described above). No
724 leading or trailing spaces are allowed.
725 debian/source/include-binaries
727 This file contains a list of pathnames of binary files (one per line)
728 relative to the source root directory that should be included in the
729 debian tarball. Leading and trailing spaces are stripped. Lines
730 starting with ‘#’ are comments and are skipped. Empty lines are
731 ignored.
732 debian/source/options
734 This file contains a list of long options that should be automatically
735 prepended to the set of command line options of a dpkg-source --build
736 or dpkg-source --print-format call. Options like --compression and
737 --compression-level are well suited for this file.
738 Each option should be put on a separate line. Empty lines and lines
740 starting with ‘#’ are ignored. The leading ‘--’ should be stripped and
741 short options are not allowed. Optional spaces are allowed around the
742 ‘=’ symbol and optional quotes are allowed around the value. Here's an
743 example of such a file:
744 # let dpkg-source create a debian.tar.bz2 with maximal compression
746 compression = "bzip2"
747 compression-level = 9
748 # use debian/patches/debian-changes as automatic patch
749 single-debian-patch
750 # ignore changes on config.{sub,guess}
751 extend-diff-ignore = "(^|/)(config.sub|config.guess)$"
752 Note: format options are not accepted in this file, you should use
754 debian/source/format instead.
755 debian/source/local-options
757 Exactly like debian/source/options except that the file is not included
758 in the generated source package. It can be useful to store a preference
759 tied to the maintainer or to the VCS repository where the source
760 package is maintained.
761 debian/source/local-patch-header
763 debian/source/patch-header
764 Free form text that is put on top of the automatic patch generated in
765 formats “2.0” or “3.0 (quilt)”. local-patch-header is not included in
766 the generated source package while patch-header is.
767 debian/patches/vendor.series
769 debian/patches/series
770 This file lists all patches that have to be applied (in the given
771 order) on top of the upstream source package. Leading and trailing
772 spaces are stripped. The vendor will be the lowercase name of the
773 current vendor, or debian if there is no vendor defined. If the
774 vendor-specific series file does not exist, the vendor-less series file
775 will be used. Lines starting with ‘#’ are comments and are skipped.
776 Empty lines are ignored. Remaining lines start with a patch filename
777 (relative to the debian/patches/ directory) up to the first space
778 character or the end of line. Optional quilt options can follow up to
779 the end of line or the first ‘#’ preceded by one or more spaces (which
780 marks the start of a comment up to the end of line).
781
783 The point at which field overriding occurs compared to certain standard
784 output field settings is rather confused.
785
787 deb-src-control(5), deb-changelog(5), dsc(5).
7881.20.9 2021-04-13 dpkg-source(1)