1restoretextmode(1) Svgalib User Manual restoretextmode(1)
2
3
4
6 restoretextmode - save or restore the SVGA registers for textmode.
7
9 restoretextmode {-r|-w} filename
10
11
13 The state of the SVGA is written to or restored from filename using the
14 vga_gettextmoderegs(3) and vga_settextmoderegs(3) functions.
15
16 As of this writing this file is 385 bytes long but this might change
17 with future versions.
18
19 Please do not fiddle with the contents of the file except when you know
20 what you do. It might even result in hardware damage. Because of that,
21 you should think twice to make this command available to all users on
22 your system.
23
24 The purpose of this program is usually to recover from a crashed con‐
25 sole due to an svgalib, Xfree or other program bug. First save the
26 state of the SVGA card when on a text console. After the crash restore
27 this state. The savetextmode(1) and textmode(1) script makes this pro‐
28 cedure very easy.
29
30
32 -w filename
33 write the SVGA state to the file filename.
34
35 -r filename
36 restore the SVGA state from the file filename.
37
39 svgalib(7), vgagl(7), libvga.config(5), vga_gettextmoderegs(3),
40 vga_settextmoderegs(3), dumpreg(1), convfont(1), fix132x43(1), restore‐
41 font(1), restorepalette(1), runx(1), savetextmode(1), setmclk(1),
42 textmode(1).
43
45 This manual page was edited by Michael Weller <eowmob@exp-math.uni-
46 essen.de>. The exact source of the referenced utility as well as of the
47 original documentation is unknown.
48
49 It is very likely that both are at least to some extent are due to Harm
50 Hanemaayer <H.Hanemaayer@inter.nl.net>.
51
52 Occasionally this might be wrong. I hereby asked to be excused by the
53 original author and will happily accept any additions or corrections to
54 this first version of the svgalib manual.
55
56
57
58Svgalib (>= 1.2.11) 2 Aug 1997 restoretextmode(1)