1SSSD-SUDO(5)             File Formats and Conventions             SSSD-SUDO(5)
2
3
4

NAME

6       sssd-sudo - Configuring sudo with the SSSD back end
7

DESCRIPTION

9       This manual page describes how to configure sudo(8) to work with
10       sssd(8) and how SSSD caches sudo rules.
11

CONFIGURING SUDO TO COOPERATE WITH SSSD

13       To enable SSSD as a source for sudo rules, add sss to the sudoers entry
14       in nsswitch.conf(5).
15
16       For example, to configure sudo to first lookup rules in the standard
17       sudoers(5) file (which should contain rules that apply to local users)
18       and then in SSSD, the nsswitch.conf file should contain the following
19       line:
20
21           sudoers: files sss
22
23       More information about configuring the sudoers search order from the
24       nsswitch.conf file as well as information about the LDAP schema that is
25       used to store sudo rules in the directory can be found in
26       sudoers.ldap(5).
27
28       Note: in order to use netgroups or IPA hostgroups in sudo rules, you
29       also need to correctly set nisdomainname(1) to your NIS domain name
30       (which equals to IPA domain name when using hostgroups).
31

CONFIGURING SSSD TO FETCH SUDO RULES

33       All configuration that is needed on SSSD side is to extend the list of
34       services with "sudo" in [sssd] section of sssd.conf(5). To speed up the
35       LDAP lookups, you can also set search base for sudo rules using
36       ldap_sudo_search_base option.
37
38       The following example shows how to configure SSSD to download sudo
39       rules from an LDAP server.
40
41           [sssd]
42           config_file_version = 2
43           services = nss, pam, sudo
44           domains = EXAMPLE
45
46           [domain/EXAMPLE]
47           id_provider = ldap
48           sudo_provider = ldap
49           ldap_uri = ldap://example.com
50           ldap_sudo_search_base = ou=sudoers,dc=example,dc=com
51
52
53       It's important to note that on platforms where systemd is supported
54       there's no need to add the "sudo" provider to the list of services, as
55       it became optional. However, sssd-sudo.socket must be enabled instead.
56
57       When SSSD is configured to use IPA as the ID provider, the sudo
58       provider is automatically enabled. The sudo search base is configured
59       to use the IPA native LDAP tree (cn=sudo,$SUFFIX). If any other search
60       base is defined in sssd.conf, this value will be used instead. The
61       compat tree (ou=sudoers,$SUFFIX) is no longer required for IPA sudo
62       functionality.
63

THE SUDO RULE CACHING MECHANISM

65       The biggest challenge, when developing sudo support in SSSD, was to
66       ensure that running sudo with SSSD as the data source provides the same
67       user experience and is as fast as sudo but keeps providing the most
68       current set of rules as possible. To satisfy these requirements, SSSD
69       uses three kinds of updates. They are referred to as full refresh,
70       smart refresh and rules refresh.
71
72       The smart refresh periodically downloads rules that are new or were
73       modified after the last update. Its primary goal is to keep the
74       database growing by fetching only small increments that do not generate
75       large amounts of network traffic.
76
77       The full refresh simply deletes all sudo rules stored in the cache and
78       replaces them with all rules that are stored on the server. This is
79       used to keep the cache consistent by removing every rule which was
80       deleted from the server. However, full refresh may produce a lot of
81       traffic and thus it should be run only occasionally depending on the
82       size and stability of the sudo rules.
83
84       The rules refresh ensures that we do not grant the user more permission
85       than defined. It is triggered each time the user runs sudo. Rules
86       refresh will find all rules that apply to this user, check their
87       expiration time and redownload them if expired. In the case that any of
88       these rules are missing on the server, the SSSD will do an out of band
89       full refresh because more rules (that apply to other users) may have
90       been deleted.
91
92       If enabled, SSSD will store only rules that can be applied to this
93       machine. This means rules that contain one of the following values in
94       sudoHost attribute:
95
96       •   keyword ALL
97
98       •   wildcard
99
100       •   netgroup (in the form "+netgroup")
101
102       •   hostname or fully qualified domain name of this machine
103
104       •   one of the IP addresses of this machine
105
106       •   one of the IP addresses of the network (in the form "address/mask")
107
108       There are many configuration options that can be used to adjust the
109       behavior. Please refer to "ldap_sudo_*" in sssd-ldap(5) and "sudo_*" in
110       sssd.conf(5).
111

TUNING THE PERFORMANCE

113       SSSD uses different kinds of mechanisms with more or less complex LDAP
114       filters to keep the cached sudo rules up to date. The default
115       configuration is set to values that should satisfy most of our users,
116       but the following paragraps contains few tips on how to fine tune the
117       configuration to your requirements.
118
119       1.  Index LDAP attributes. Make sure that following LDAP attributes are
120       indexed: objectClass, cn, entryUSN or modifyTimestamp.
121
122       2.  Set ldap_sudo_search_base. Set the search base to the container
123       that holds the sudo rules to limit the scope of the lookup.
124
125       3.  Set full and smart refresh interval. If your sudo rules do not
126       change often and you do not require quick update of cached rules on
127       your clients, you may consider increasing the
128       ldap_sudo_full_refresh_interval and ldap_sudo_smart_refresh_interval.
129       You may also consider disabling the smart refresh by setting
130       ldap_sudo_smart_refresh_interval = 0.
131
132       4. If you have large number of clients, you may consider increasing the
133       value of ldap_sudo_random_offset to distribute the load on the server
134       better.
135

SEE ALSO

137       sssd(8), sssd.conf(5), sssd-ldap(5), sssd-krb5(5), sssd-simple(5),
138       sssd-ipa(5), sssd-ad(5), sssd-files(5), sssd-sudo(5), sssd-session-
139       recording(5), sss_cache(8), sss_debuglevel(8), sss_obfuscate(8),
140       sss_seed(8), sssd_krb5_locator_plugin(8), sss_ssh_authorizedkeys(8),
141       sss_ssh_knownhostsproxy(8), sssd-ifp(5), pam_sss(8).  sss_rpcidmapd(5)
142       sssd-systemtap(5)
143

AUTHORS

145       The SSSD upstream - https://github.com/SSSD/sssd/
146
147
148
149SSSD                              05/19/2021                      SSSD-SUDO(5)
Impressum