1SHEEPDOG(8)                 System Manager's Manual                SHEEPDOG(8)
2
3
4

NAME

6       dog - Command line utility for the sheep daemon
7

SYNOPSIS

9       dog <command> <subcommand> [options]
10

DESCRIPTION

12       dog  -  Sheepdog  is a distributed storage system for QEMU. It provides
13       highly available block  level  storage  volumes  to  virtual  machines.
14       Sheepdog supports advanced volume management features such as snapshot,
15       cloning, and thin provisioning. The architecture of Sheepdog  is  fully
16       symmetric; there is no central node such as a meta-data server.
17
18       The server daemon is called sheep(8).  A command line utility is avail‐
19       able via dog(8).  QEMU virtual machines use  the  sheep  daemon  via  a
20       block driver available in qemu(1).
21
22       For more information, run 'dog <command> <subcommand> --help'.
23

COMMAND & SUBCOMMAND

25       vdi check [-s snapshot] [-e] [-a address] [-p port] [-h] [-T] <vdiname>
26
27              Options:
28                -s, --snapshot          specify a snapshot id or tag name
29                -e, --exist             only check objects exist or not,
30                                        neither comparing nor repairing
31                -a,  --address            specify the daemon address (default:
32              localhost)
33                -p, --port              specify the daemon port
34                -h, --help              display this help and exit
35                -T, --time              show elapsed time
36
37              Description:
38                check and repair image's consistency
39
40       vdi create [-P] [-y] [-c copies] [-a address] [-p port] [-h] [-r]  [-v]
41       [-z block_size_shift] [-T] <vdiname> <size>
42
43              Options:
44                -P, --prealloc          preallocate all the data objects
45                -y, --hyper             create a hyper volume
46                -c, --copies            specify the data redundancy level
47                -a,  --address            specify the daemon address (default:
48              localhost)
49                -p, --port              specify the daemon port
50                -h, --help              display this help and exit
51                -r, --raw               raw output mode: omit  headers,  sepa‐
52              rate fields with
53                                        single  spaces  and print all sizes in
54              decimal bytes
55                -v, --verbose           print more information than default
56                -z, --block_size_shift  specify the bit shift num for data ob‐
57              ject size
58                -T, --time              show elapsed time
59
60              Description:
61                create an image
62
63       vdi  snapshot  [-s snapshot] [-a address] [-p port] [-h] [-r] [-v] [-T]
64       [-R] <vdiname>
65
66              Options:
67                -s, --snapshot          specify a snapshot id or tag name
68                -a, --address           specify the daemon  address  (default:
69              localhost)
70                -p, --port              specify the daemon port
71                -h, --help              display this help and exit
72                -r,  --raw                raw output mode: omit headers, sepa‐
73              rate fields with
74                                        single spaces and print all  sizes  in
75              decimal bytes
76                -v, --verbose           print more information than default
77                -T, --time              show elapsed time
78                -R,  --reduce-identical-snapshotsdo  not  create  snapshot  if
79              working VDI doesn't have its own objects
80
81              Description:
82                create a snapshot
83
84       vdi clone [-s snapshot] [-P] [-n] [-a address] [-p port] [-h] [-r] [-v]
85       [-T] <src vdi> <dst vdi>
86
87              Options:
88                -s, --snapshot          specify a snapshot id or tag name
89                -P, --prealloc          preallocate all the data objects
90                -n, --no-share          share nothing with its parent
91                -a,  --address            specify the daemon address (default:
92              localhost)
93                -p, --port              specify the daemon port
94                -h, --help              display this help and exit
95                -r, --raw               raw output mode: omit  headers,  sepa‐
96              rate fields with
97                                        single  spaces  and print all sizes in
98              decimal bytes
99                -v, --verbose           print more information than default
100                -T, --time              show elapsed time
101
102              Description:
103                clone an image
104
105       vdi delete [-s snapshot] [-a address] [-p port] [-h] [-T] <vdiname>
106
107              Options:
108                -s, --snapshot          specify a snapshot id or tag name
109                -a, --address           specify the daemon  address  (default:
110              localhost)
111                -p, --port              specify the daemon port
112                -h, --help              display this help and exit
113                -T, --time              show elapsed time
114
115              Description:
116                delete an image
117
118       vdi  rollback  [-s snapshot] [-a address] [-p port] [-h] [-f] [-r] [-v]
119       [-T] <vdiname>
120
121              Options:
122                -s, --snapshot          specify a snapshot id or tag name
123                -a, --address           specify the daemon  address  (default:
124              localhost)
125                -p, --port              specify the daemon port
126                -h, --help              display this help and exit
127                -f, --force             do operation forcibly
128                -r,  --raw                raw output mode: omit headers, sepa‐
129              rate fields with
130                                        single spaces and print all  sizes  in
131              decimal bytes
132                -v, --verbose           print more information than default
133                -T, --time              show elapsed time
134
135              Description:
136                rollback to a snapshot
137
138       vdi list [-a address] [-p port] [-r] [-h] [-o oid] [-T] [vdiname]
139
140              Options:
141                -a,  --address            specify the daemon address (default:
142              localhost)
143                -p, --port              specify the daemon port
144                -r, --raw               raw output mode: omit  headers,  sepa‐
145              rate fields with
146                                        single  spaces  and print all sizes in
147              decimal bytes
148                -h, --help              display this help and exit
149                -o, --oid               specify the object id of the  tracking
150              object
151                -T, --time              show elapsed time
152
153              Description:
154                list images
155
156       vdi tree [-a address] [-p port] [-h] [-T]
157
158              Options:
159                -a,  --address            specify the daemon address (default:
160              localhost)
161                -p, --port              specify the daemon port
162                -h, --help              display this help and exit
163                -T, --time              show elapsed time
164
165              Description:
166                show images in tree view format
167
168       vdi graph [-a address] [-p port] [-h] [-T]
169
170              Options:
171                -a, --address           specify the daemon  address  (default:
172              localhost)
173                -p, --port              specify the daemon port
174                -h, --help              display this help and exit
175                -T, --time              show elapsed time
176
177              Description:
178                show images in Graphviz dot format
179
180       vdi  object  {location|map|dump-inode} [-i index] [-s snapshot] [-a ad‐
181       dress] [-p port] [-h] [-T] <vdiname>
182
183              Available subcommands:
184                location                show object location information
185                map                     show object map information
186                dump-inode              dump inode information
187
188              Options:
189                -i, --index             specify the index of data objects
190                -s, --snapshot          specify a snapshot id or tag name
191                -a, --address           specify the daemon  address  (default:
192              localhost)
193                -p, --port              specify the daemon port
194                -h, --help              display this help and exit
195                -T, --time              show elapsed time
196
197              Description:
198                show object information in the image
199
200       vdi track [-i index] [-s snapshot] [-a address] [-p port] [-h] [-o oid]
201       [-T] <vdiname>
202
203              Options:
204                -i, --index             specify the index of data objects
205                -s, --snapshot          specify a snapshot id or tag name
206                -a, --address           specify the daemon  address  (default:
207              localhost)
208                -p, --port              specify the daemon port
209                -h, --help              display this help and exit
210                -o,  --oid               specify the object id of the tracking
211              object
212                -T, --time              show elapsed time
213
214              Description:
215                show the object epoch trace in the image
216
217       vdi setattr [-d] [-x] [-a address] [-p port] [-h] [-T] <vdiname>  <key>
218       [value]
219
220              Options:
221                -d, --delete            delete a key
222                -x, --exclusive         write in an exclusive mode
223                -a,  --address            specify the daemon address (default:
224              localhost)
225                -p, --port              specify the daemon port
226                -h, --help              display this help and exit
227                -T, --time              show elapsed time
228
229              Description:
230                set a VDI attribute
231
232       vdi getattr [-a address] [-p port] [-h] [-T] <vdiname> <key>
233
234              Options:
235                -a, --address           specify the daemon  address  (default:
236              localhost)
237                -p, --port              specify the daemon port
238                -h, --help              display this help and exit
239                -T, --time              show elapsed time
240
241              Description:
242                get a VDI attribute
243
244       vdi resize [-a address] [-p port] [-h] [-T] <vdiname> <new size>
245
246              Options:
247                -a,  --address            specify the daemon address (default:
248              localhost)
249                -p, --port              specify the daemon port
250                -h, --help              display this help and exit
251                -T, --time              show elapsed time
252
253              Description:
254                resize an image
255
256       vdi read [-s snapshot] [-a  address]  [-p  port]  [-h]  [-T]  <vdiname>
257       [<offset> [<len>]]
258
259              Options:
260                -s, --snapshot          specify a snapshot id or tag name
261                -a,  --address            specify the daemon address (default:
262              localhost)
263                -p, --port              specify the daemon port
264                -h, --help              display this help and exit
265                -T, --time              show elapsed time
266
267              Description:
268                read data from an image
269
270       vdi write [-a address] [-p port] [-w]  [-h]  [-T]  <vdiname>  [<offset>
271       [<len>]]
272
273              Options:
274                -a,  --address            specify the daemon address (default:
275              localhost)
276                -p, --port              specify the daemon port
277                -w, --writeback         use writeback mode
278                -h, --help              display this help and exit
279                -T, --time              show elapsed time
280
281              Description:
282                write data to an image
283
284       vdi backup [-s snapshot] [-F from] [-a address]  [-p  port]  [-h]  [-T]
285       <vdiname>
286
287              Options:
288                -s, --snapshot          specify a snapshot id or tag name
289                -F,  --from              create a differential backup from the
290              snapshot
291                -a, --address           specify the daemon  address  (default:
292              localhost)
293                -p, --port              specify the daemon port
294                -h, --help              display this help and exit
295                -T, --time              show elapsed time
296
297              Description:
298                create an incremental backup between two snapshots and outputs
299              to STDOUT
300
301       vdi restore [-s snapshot] [-a address] [-p port] [-h] [-T] <vdiname>
302
303              Options:
304                -s, --snapshot          specify a snapshot id or tag name
305                -a, --address           specify the daemon  address  (default:
306              localhost)
307                -p, --port              specify the daemon port
308                -h, --help              display this help and exit
309                -T, --time              show elapsed time
310
311              Description:
312                restore snapshot images from a backup provided in STDIN
313
314       vdi  alter-copy [-c copies] [-a address] [-p port] [-h] [-T] [-f] <vdi‐
315       name>
316
317              Options:
318                -c, --copies            specify the data redundancy level
319                -a, --address           specify the daemon  address  (default:
320              localhost)
321                -p, --port              specify the daemon port
322                -h, --help              display this help and exit
323                -T, --time              show elapsed time
324                -f, --force             do operation forcibly
325
326              Description:
327                set the vdi's redundancy level
328
329       vdi lock {list|unlock} [-s snapshot] [-a address] [-p port] [-h] [-T]
330
331              Available subcommands:
332                list                    list locked VDIs
333                unlock                  unlock locked VDI forcibly
334
335              Options:
336                -s, --snapshot          specify a snapshot id or tag name
337                -a,  --address            specify the daemon address (default:
338              localhost)
339                -p, --port              specify the daemon port
340                -h, --help              display this help and exit
341                -T, --time              show elapsed time
342
343              Description:
344                See 'dog vdi lock' for more information
345
346       node kill [-a address] [-p port] [-r] [-h] [-l] [-T] <node id>
347
348              Options:
349                -a, --address           specify the daemon  address  (default:
350              localhost)
351                -p, --port              specify the daemon port
352                -r,  --raw                raw output mode: omit headers, sepa‐
353              rate fields with
354                                        single spaces and print all  sizes  in
355              decimal bytes
356                -h, --help              display this help and exit
357                -l, --local             issue request to local node
358                -T, --time              show elapsed time
359
360              Description:
361                kill node
362
363       node list [-a address] [-p port] [-r] [-h] [-T]
364
365              Options:
366                -a,  --address            specify the daemon address (default:
367              localhost)
368                -p, --port              specify the daemon port
369                -r, --raw               raw output mode: omit  headers,  sepa‐
370              rate fields with
371                                        single  spaces  and print all sizes in
372              decimal bytes
373                -h, --help              display this help and exit
374                -T, --time              show elapsed time
375
376              Description:
377                list nodes
378
379       node info [-a address] [-p port] [-r] [-h] [-T]
380
381              Options:
382                -a, --address           specify the daemon  address  (default:
383              localhost)
384                -p, --port              specify the daemon port
385                -r,  --raw                raw output mode: omit headers, sepa‐
386              rate fields with
387                                        single spaces and print all  sizes  in
388              decimal bytes
389                -h, --help              display this help and exit
390                -T, --time              show elapsed time
391
392              Description:
393                show information about each node
394
395       node  recovery  {info|set-throttle|get-throttle} [-a address] [-p port]
396       [-h] [-P] [-r] [-T] <max> <interval>
397
398              Available subcommands:
399                info                    show  recovery  information  of  nodes
400              (default)
401                set-throttle            set new throttling
402                get-throttle            get current throttling
403
404              Options:
405                -a,  --address            specify the daemon address (default:
406              localhost)
407                -p, --port              specify the daemon port
408                -h, --help              display this help and exit
409                -P, --progress          show progress of recovery in the node
410                -r, --raw               raw output mode: omit  headers,  sepa‐
411              rate fields with
412                                        single  spaces  and print all sizes in
413              decimal bytes
414                -T, --time              show elapsed time
415
416              Description:
417                show recovery information or set/get recovery speed throttling
418              of nodes
419
420       node  md  {info|plug|unplug} [-a address] [-p port] [-r] [-A] [-f] [-h]
421       [-T] [disks]
422
423              Available subcommands:
424                info                    show multi-disk information
425                plug                    plug more disk(s) into node
426                unplug                  unplug disk(s) from node
427
428              Options:
429                -a, --address           specify the daemon  address  (default:
430              localhost)
431                -p, --port              specify the daemon port
432                -r,  --raw                raw output mode: omit headers, sepa‐
433              rate fields with
434                                        single spaces and print all  sizes  in
435              decimal bytes
436                -A, --all               show md information of all the nodes
437                -f, --force             ignore the confirmation
438                -h, --help              display this help and exit
439                -T, --time              show elapsed time
440
441              Description:
442                See 'dog node md' for more information
443
444       node stat [-a address] [-p port] [-r] [-w] [-h] [-T]
445
446              Options:
447                -a,  --address            specify the daemon address (default:
448              localhost)
449                -p, --port              specify the daemon port
450                -r, --raw               raw output mode: omit  headers,  sepa‐
451              rate fields with
452                                        single  spaces  and print all sizes in
453              decimal bytes
454                -w, --watch             watch the stat every second
455                -h, --help              display this help and exit
456                -T, --time              show elapsed time
457
458              Description:
459                show stat information about the node
460
461       node log level [-a address] [-p port] [-h] [-T]
462
463              Available subcommands:
464                level                   manipulate loglevel
465
466              Options:
467                -a, --address           specify the daemon  address  (default:
468              localhost)
469                -p, --port              specify the daemon port
470                -h, --help              display this help and exit
471                -T, --time              show elapsed time
472
473              Description:
474                show or set log level of the node
475
476       node vnodes set [-a address] [-p port] [-h] <num of vnodes>
477
478              Available subcommands:
479                set                     set new vnodes
480
481              Options:
482                -a,  --address            specify the daemon address (default:
483              localhost)
484                -p, --port              specify the daemon port
485                -h, --help              display this help and exit
486
487              Description:
488                set new vnodes
489
490       node format [-a address] [-p port] [-h] [-T] <directory  of  sheep>  <a
491       name of store format>
492
493              Options:
494                -a,  --address            specify the daemon address (default:
495              localhost)
496                -p, --port              specify the daemon port
497                -h, --help              display this help and exit
498                -T, --time              show elapsed time
499
500              Description:
501                initialize store format of the node
502
503       cluster info [-a address] [-p port] [-r] [-h] [-v] [-T] [-d]
504
505              Options:
506                -a, --address           specify the daemon  address  (default:
507              localhost)
508                -p, --port              specify the daemon port
509                -r,  --raw                raw output mode: omit headers, sepa‐
510              rate fields with
511                                        single spaces and print all  sizes  in
512              decimal bytes
513                -h, --help              display this help and exit
514                -v, --verbose           print more information than default
515                -T, --time              show elapsed time
516                -d,  --diff               just  output the changes between the
517              two adjacent epochesfor cluster info
518
519              Description:
520                show cluster information
521
522       cluster format [-b store] [-c copies] [-l] [-t] [-a address] [-p  port]
523       [-h] [-z block_size_shift] [-T] [-V] [-R] [-f] [-F]
524
525              Options:
526                -b, --store             specify backend store
527                -c,  --copies             specify  the default data redundancy
528              (number of copies)
529                -l, --lock              Lock vdi to exclude multiple users
530                -t, --strict            do not serve write request  if  number
531              of nodes is not sufficient
532                -a,  --address            specify the daemon address (default:
533              localhost)
534                -p, --port              specify the daemon port
535                -h, --help              display this help and exit
536                -z, --block_size_shift  specify the shift num of default  data
537              object size
538                -T, --time              show elapsed time
539                -V, --fixedvnodes       disable automatic vnodes calculation
540                -R, --recyclevid        enable recycling of VID
541                -f, --force             do not prompt for confirmation
542                -F,  --avoid-diskfull    skip recovery if recovery process can
543              cause disk full
544
545              Description:
546                create a Sheepdog store
547
548       cluster shutdown [-a address] [-p port] [-h] [-T]
549
550              Options:
551                -a, --address           specify the daemon  address  (default:
552              localhost)
553                -p, --port              specify the daemon port
554                -h, --help              display this help and exit
555                -T, --time              show elapsed time
556
557              Description:
558                stop Sheepdog
559
560       cluster snapshot {save|list|load|show} [-a address] [-p port] [-h] [-T]
561       [-m] <tag|idx> <path> [vdi1] [vdi2] ...
562
563              Available subcommands:
564                save                    save snapshot to localpath
565                list                    list snapshot of localpath
566                load                    load snapshot from localpath
567                show                    show vdi list from snapshot
568
569              Options:
570                -a, --address           specify the daemon  address  (default:
571              localhost)
572                -p, --port              specify the daemon port
573                -h, --help              display this help and exit
574                -T, --time              show elapsed time
575                -m, --multithread       use multi-thread for 'cluster snapshot
576              save'
577
578              Description:
579                snapshot/restore the cluster
580
581       cluster recover {force|enable|disable} [-a address] [-f] [-p port] [-h]
582       [-T]
583
584              Available subcommands:
585                force                   force recover cluster immediately
586                enable                  enable automatic recovery and run once
587              recover if necessary
588                disable                 disable automatic recovery
589
590              Options:
591                -a, --address           specify the daemon  address  (default:
592              localhost)
593                -f, --force             do not prompt for confirmation
594                -p, --port              specify the daemon port
595                -h, --help              display this help and exit
596                -T, --time              show elapsed time
597
598              Description:
599                See 'dog cluster recover' for more information
600
601       cluster reweight [-a address] [-p port] [-h] [-T]
602
603              Options:
604                -a,  --address            specify the daemon address (default:
605              localhost)
606                -p, --port              specify the daemon port
607                -h, --help              display this help and exit
608                -T, --time              show elapsed time
609
610              Description:
611                reweight the cluster
612
613       cluster check [-a address] [-p port] [-h] [-T]
614
615              Options:
616                -a, --address           specify the daemon  address  (default:
617              localhost)
618                -p, --port              specify the daemon port
619                -h, --help              display this help and exit
620                -T, --time              show elapsed time
621
622              Description:
623                check and repair cluster
624
625       cluster alter-copy [-a address] [-p port] [-h] [-T] [-c copies] [-f]
626
627              Options:
628                -a,  --address            specify the daemon address (default:
629              localhost)
630                -p, --port              specify the daemon port
631                -h, --help              display this help and exit
632                -T, --time              show elapsed time
633                -c, --copies            specify the  default  data  redundancy
634              (number of copies)
635                -f, --force             do not prompt for confirmation
636
637              Description:
638                set the cluster's redundancy level
639
640       upgrade inode-convert [-h] [-T] [-o orig-version] <path of original in‐
641       ode file> <path of new inode file>
642
643              Options:
644                -h, --help              display this help and exit
645                -T, --time              show elapsed time
646                -o, --orig-version      version of converting file
647
648              Description:
649                upgrade inode object file
650
651       upgrade epoch-convert [-h] [-T] [-o  orig-version]  <path  of  original
652       epoch log file> <path of new epoch log file>
653
654              Options:
655                -h, --help              display this help and exit
656                -T, --time              show elapsed time
657                -o, --orig-version      version of converting file
658
659              Description:
660                upgrade epoch log file
661
662       benchmark  io [-a address] [-p port] [-r] [-h] [-T] [-f] [-w workqueue]
663       [-t total] [-n nr-threads] <vdiname>
664
665              Options:
666                -a, --address           specify the daemon  address  (default:
667              localhost)
668                -p, --port              specify the daemon port
669                -r,  --raw                raw output mode: omit headers, sepa‐
670              rate fields with
671                                        single spaces and print all  sizes  in
672              decimal bytes
673                -h, --help              display this help and exit
674                -T, --time              show elapsed time
675                -f, --force             do not prompt for confirmation
676                -w, --workqueue         specify workqueue type
677                -t,  --total             a number of total operation (e.g. I/O
678              request)
679                -n, --nr-threads        a number of worker threads (only  used
680              for fixed workqueue)
681
682              Description:
683                benchmark I/O performance
684
685

DEPENDENCIES

687       Sheepdog requires QEMU 0.13.z or later and Corosync 1.y.z or 2.y.z.
688
689

FILES

691       none
692
693

SEE ALSO

695       sheep(8), qemu(1), sheepfs(8), corosync_overview(8)
696
697

AUTHORS

699       This  software  is  developed  by  the  Sheepdog community which may be
700       reached via mailing list at <sheepdog@lists.wpkg.org>.
701
702                                  2021-01-29                       SHEEPDOG(8)
Impressum