1geoclue_selinux(8) SELinux Policy geoclue geoclue_selinux(8)
2
3
4
6 geoclue_selinux - Security Enhanced Linux Policy for the geoclue pro‐
7 cesses
8
10 Security-Enhanced Linux secures the geoclue processes via flexible
11 mandatory access control.
12
13 The geoclue processes execute with the geoclue_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep geoclue_t
20
21
22
24 The geoclue_t SELinux type can be entered via the geoclue_exec_t file
25 type.
26
27 The default entrypoint paths for the geoclue_t domain are the follow‐
28 ing:
29
30 /usr/libexec/geoclue
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 geoclue policy is very flexible allowing users to setup their geoclue
40 processes in as secure a method as possible.
41
42 The following process types are defined for geoclue:
43
44 geoclue_t
45
46 Note: semanage permissive -a geoclue_t can be used to make the process
47 type geoclue_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required. geoclue
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run geoclue with the tightest access possi‐
56 ble.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
67 If you want to allow confined applications to run with kerberos, you
68 must turn on the kerberos_enabled boolean. Enabled by default.
69
70 setsebool -P kerberos_enabled 1
71
72
73
74 If you want to allow confined applications to use nscd shared memory,
75 you must turn on the nscd_use_shm boolean. Enabled by default.
76
77 setsebool -P nscd_use_shm 1
78
79
80
82 The SELinux process type geoclue_t can manage files labeled with the
83 following file types. The paths listed are the default paths for these
84 file types. Note the processes UID still need to have DAC permissions.
85
86 cluster_conf_t
87
88 /etc/cluster(/.*)?
89
90 cluster_var_lib_t
91
92 /var/lib/pcsd(/.*)?
93 /var/lib/cluster(/.*)?
94 /var/lib/openais(/.*)?
95 /var/lib/pengine(/.*)?
96 /var/lib/corosync(/.*)?
97 /usr/lib/heartbeat(/.*)?
98 /var/lib/heartbeat(/.*)?
99 /var/lib/pacemaker(/.*)?
100
101 cluster_var_run_t
102
103 /var/run/crm(/.*)?
104 /var/run/cman_.*
105 /var/run/rsctmp(/.*)?
106 /var/run/aisexec.*
107 /var/run/heartbeat(/.*)?
108 /var/run/pcsd-ruby.socket
109 /var/run/corosync-qnetd(/.*)?
110 /var/run/corosync-qdevice(/.*)?
111 /var/run/corosync.pid
112 /var/run/cpglockd.pid
113 /var/run/rgmanager.pid
114 /var/run/cluster/rgmanager.sk
115
116 geoclue_tmp_t
117
118
119 geoclue_var_lib_t
120
121 /var/lib/geoclue(/.*)?
122
123 root_t
124
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
129
131 SELinux requires files to have an extended attribute to define the file
132 type.
133
134 You can see the context of a file using the -Z option to ls
135
136 Policy governs the access confined processes have to these files.
137 SELinux geoclue policy is very flexible allowing users to setup their
138 geoclue processes in as secure a method as possible.
139
140 STANDARD FILE CONTEXT
141
142 SELinux defines the file context types for the geoclue, if you wanted
143 to store files with these types in a diffent paths, you need to execute
144 the semanage command to sepecify alternate labeling and then use re‐
145 storecon to put the labels on disk.
146
147 semanage fcontext -a -t geoclue_tmp_t '/srv/mygeoclue_content(/.*)?'
148 restorecon -R -v /srv/mygeoclue_content
149
150 Note: SELinux often uses regular expressions to specify labels that
151 match multiple files.
152
153 The following file types are defined for geoclue:
154
155
156
157 geoclue_exec_t
158
159 - Set files with the geoclue_exec_t type, if you want to transition an
160 executable to the geoclue_t domain.
161
162
163
164 geoclue_tmp_t
165
166 - Set files with the geoclue_tmp_t type, if you want to store geoclue
167 temporary files in the /tmp directories.
168
169
170
171 geoclue_var_lib_t
172
173 - Set files with the geoclue_var_lib_t type, if you want to store the
174 geoclue files under the /var/lib directory.
175
176
177
178 Note: File context can be temporarily modified with the chcon command.
179 If you want to permanently change the file context you need to use the
180 semanage fcontext command. This will modify the SELinux labeling data‐
181 base. You will need to use restorecon to apply the labels.
182
183
185 semanage fcontext can also be used to manipulate default file context
186 mappings.
187
188 semanage permissive can also be used to manipulate whether or not a
189 process type is permissive.
190
191 semanage module can also be used to enable/disable/install/remove pol‐
192 icy modules.
193
194 semanage boolean can also be used to manipulate the booleans
195
196
197 system-config-selinux is a GUI tool available to customize SELinux pol‐
198 icy settings.
199
200
202 This manual page was auto-generated using sepolicy manpage .
203
204
206 selinux(8), geoclue(8), semanage(8), restorecon(8), chcon(1), sepol‐
207 icy(8), setsebool(8)
208
209
210
211geoclue 21-06-09 geoclue_selinux(8)