ipsec_selinux(8)

1ipsec_selinux(8)             SELinux Policy ipsec             ipsec_selinux(8)
2
3
4

NAME

6       ipsec_selinux - Security Enhanced Linux Policy for the ipsec processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the ipsec processes via flexible manda‐
10       tory access control.
11
12       The ipsec processes execute with the  ipsec_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep ipsec_t
19
20
21

ENTRYPOINTS

23       The ipsec_t SELinux type can be entered via the ipsec_exec_t file type.
24
25       The default entrypoint paths for the ipsec_t domain are the following:
26
27       /usr/libexec/strongimcv/.*,                 /usr/libexec/strongswan/.*,
28       /usr/lib/ipsec/spi,     /usr/lib/ipsec/pluto,    /usr/lib/ipsec/eroute,
29       /usr/libexec/ipsec/spi, /usr/libexec/ipsec/pluto, /usr/sbin/charon-sys‐
30       temd,       /usr/lib/ipsec/klipsdebug,       /usr/libexec/ipsec/eroute,
31       /usr/libexec/ipsec/addconn, /usr/libexec/ipsec/klipsdebug
32

PROCESS TYPES

34       SELinux defines process types (domains) for each process running on the
35       system
36
37       You can see the context of a process using the -Z option to ps
38
39       Policy  governs  the  access confined processes have to files.  SELinux
40       ipsec policy is very flexible allowing users to setup their ipsec  pro‐
41       cesses in as secure a method as possible.
42
43       The following process types are defined for ipsec:
44
45       ipsec_t, ipsec_mgmt_t
46
47       Note:  semanage  permissive  -a ipsec_t can be used to make the process
48       type ipsec_t permissive. SELinux does not  deny  access  to  permissive
49       process  types, but the AVC (SELinux denials) messages are still gener‐
50       ated.
51
52

BOOLEANS

54       SELinux policy is customizable based on least access  required.   ipsec
55       policy is extremely flexible and has several booleans that allow you to
56       manipulate the policy and run ipsec with the tightest access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to allow confined applications to run with kerberos, you
68       must turn on the kerberos_enabled boolean. Enabled by default.
69
70       setsebool -P kerberos_enabled 1
71
72
73
74       If you want to allow system to run with  NIS,  you  must  turn  on  the
75       nis_enabled boolean. Disabled by default.
76
77       setsebool -P nis_enabled 1
78
79
80

PORT TYPES

82       SELinux defines port types to represent TCP and UDP ports.
83
84       You  can  see  the  types associated with a port by using the following
85       command:
86
87       semanage port -l
88
89
90       Policy governs the access  confined  processes  have  to  these  ports.
91       SELinux  ipsec  policy  is  very flexible allowing users to setup their
92       ipsec processes in as secure a method as possible.
93
94       The following port types are defined for ipsec:
95
96
97       ipsecnat_port_t
98
99
100
101       Default Defined Ports:
102                 tcp 4500
103                 udp 4500
104

MANAGED FILES

106       The SELinux process type ipsec_t can manage files labeled with the fol‐
107       lowing  file  types.   The paths listed are the default paths for these
108       file types.  Note the processes UID still need to have DAC permissions.
109
110       cluster_conf_t
111
112            /etc/cluster(/.*)?
113
114       cluster_var_lib_t
115
116            /var/lib/pcsd(/.*)?
117            /var/lib/cluster(/.*)?
118            /var/lib/openais(/.*)?
119            /var/lib/pengine(/.*)?
120            /var/lib/corosync(/.*)?
121            /usr/lib/heartbeat(/.*)?
122            /var/lib/heartbeat(/.*)?
123            /var/lib/pacemaker(/.*)?
124
125       cluster_var_run_t
126
127            /var/run/crm(/.*)?
128            /var/run/cman_.*
129            /var/run/rsctmp(/.*)?
130            /var/run/aisexec.*
131            /var/run/heartbeat(/.*)?
132            /var/run/pcsd-ruby.socket
133            /var/run/corosync-qnetd(/.*)?
134            /var/run/corosync-qdevice(/.*)?
135            /var/run/corosync.pid
136            /var/run/cpglockd.pid
137            /var/run/rgmanager.pid
138            /var/run/cluster/rgmanager.sk
139
140       faillog_t
141
142            /var/log/btmp.*
143            /var/log/faillog.*
144            /var/log/tallylog.*
145            /var/run/faillock(/.*)?
146
147       ipsec_conf_file_t
148
149            /etc/racoon(/.*)?
150            /etc/strongimcv(/.*)?
151            /etc/strongswan(/.*)?
152            /etc/ipsec.conf
153            /etc/strongswan/ipsec.conf
154
155       ipsec_key_file_t
156
157            /etc/ipsec.d(/.*)?
158            /etc/racoon/certs(/.*)?
159            /etc/ipsec.secrets.*
160            /var/lib/ipsec/nss(/.*)?
161            /etc/strongswan/ipsec.d(/.*)?
162            /etc/strongswan/swanctl/rsa(/.*)?
163            /etc/strongswan/swanctl/pkcs.*
164            /etc/strongswan/swanctl/x509.*
165            /etc/strongswan/ipsec.secrets.*
166            /etc/strongswan/swanctl/ecdsa(/.*)?
167            /etc/strongswan/swanctl/bliss/(/.*)?
168            /etc/strongswan/swanctl/pubkey(/.*)?
169            /etc/strongswan/swanctl/private(/.*)?
170            /etc/racoon/psk.txt
171
172       ipsec_log_t
173
174            /var/log/pluto.log.*
175
176       ipsec_tmp_t
177
178
179       ipsec_var_run_t
180
181            /var/racoon(/.*)?
182            /var/run/pluto(/.*)?
183            /var/run/charon.*
184            /var/run/strongswan(/.*)?
185            /var/run/racoon.pid
186            /var/run/charon.ctl
187            /var/run/charon.dck
188            /var/run/charon.vici
189
190       krb5_host_rcache_t
191
192            /var/tmp/krb5_0.rcache2
193            /var/cache/krb5rcache(/.*)?
194            /var/tmp/nfs_0
195            /var/tmp/DNS_25
196            /var/tmp/host_0
197            /var/tmp/imap_0
198            /var/tmp/HTTP_23
199            /var/tmp/HTTP_48
200            /var/tmp/ldap_55
201            /var/tmp/ldap_487
202            /var/tmp/ldapmap1_0
203
204       lastlog_t
205
206            /var/log/lastlog.*
207
208       named_cache_t
209
210            /var/named/data(/.*)?
211            /var/lib/softhsm(/.*)?
212            /var/lib/unbound(/.*)?
213            /var/named/slaves(/.*)?
214            /var/named/dynamic(/.*)?
215            /var/named/chroot/var/tmp(/.*)?
216            /var/named/chroot/var/named/data(/.*)?
217            /var/named/chroot/var/named/slaves(/.*)?
218            /var/named/chroot/var/named/dynamic(/.*)?
219
220       pkcs_slotd_lock_t
221
222            /var/lock/opencryptoki(/.*)?
223
224       pkcs_slotd_tmpfs_t
225
226            dev/shm/var.lib.opencryptoki.*
227
228       pkcs_slotd_var_lib_t
229
230            /var/lib/opencryptoki(/.*)?
231
232       root_t
233
234            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
235            /
236            /initrd
237
238       security_t
239
240            /selinux
241
242

FILE CONTEXTS

244       SELinux requires files to have an extended attribute to define the file
245       type.
246
247       You can see the context of a file using the -Z option to ls
248
249       Policy  governs  the  access  confined  processes  have to these files.
250       SELinux ipsec policy is very flexible allowing  users  to  setup  their
251       ipsec processes in as secure a method as possible.
252
253       EQUIVALENCE DIRECTORIES
254
255
256       ipsec policy stores data with multiple different file context types un‐
257       der the /var/run/pluto directory.  If you would like to store the  data
258       in  a different directory you can use the semanage command to create an
259       equivalence mapping.  If you wanted to store this data under  the  /srv
260       directory you would execute the following command:
261
262       semanage fcontext -a -e /var/run/pluto /srv/pluto
263       restorecon -R -v /srv/pluto
264
265       STANDARD FILE CONTEXT
266
267       SELinux  defines the file context types for the ipsec, if you wanted to
268       store files with these types in a diffent paths, you  need  to  execute
269       the  semanage  command  to sepecify alternate labeling and then use re‐
270       storecon to put the labels on disk.
271
272       semanage  fcontext   -a   -t   ipsec_mgmt_devpts_t   '/srv/myipsec_con‐
273       tent(/.*)?'
274       restorecon -R -v /srv/myipsec_content
275
276       Note:  SELinux  often  uses  regular expressions to specify labels that
277       match multiple files.
278
279       The following file types are defined for ipsec:
280
281
282
283       ipsec_conf_file_t
284
285       - Set files with the ipsec_conf_file_t type, if you want to  treat  the
286       files as ipsec conf content.
287
288
289       Paths:
290            /etc/racoon(/.*)?,  /etc/strongimcv(/.*)?,  /etc/strongswan(/.*)?,
291            /etc/ipsec.conf, /etc/strongswan/ipsec.conf
292
293
294       ipsec_exec_t
295
296       - Set files with the ipsec_exec_t type, if you want  to  transition  an
297       executable to the ipsec_t domain.
298
299
300       Paths:
301            /usr/libexec/strongimcv/.*,            /usr/libexec/strongswan/.*,
302            /usr/lib/ipsec/spi,  /usr/lib/ipsec/pluto,  /usr/lib/ipsec/eroute,
303            /usr/libexec/ipsec/spi,                  /usr/libexec/ipsec/pluto,
304            /usr/sbin/charon-systemd,               /usr/lib/ipsec/klipsdebug,
305            /usr/libexec/ipsec/eroute,             /usr/libexec/ipsec/addconn,
306            /usr/libexec/ipsec/klipsdebug
307
308
309       ipsec_initrc_exec_t
310
311       - Set files with the ipsec_initrc_exec_t type, if you want  to  transi‐
312       tion an executable to the ipsec_initrc_t domain.
313
314
315       Paths:
316            /etc/rc.d/init.d/ipsec,                   /etc/rc.d/init.d/racoon,
317            /etc/rc.d/init.d/strongswan
318
319
320       ipsec_key_file_t
321
322       - Set files with the ipsec_key_file_t type, if you want  to  treat  the
323       files as ipsec key content.
324
325
326       Paths:
327            /etc/ipsec.d(/.*)?, /etc/racoon/certs(/.*)?, /etc/ipsec.secrets.*,
328            /var/lib/ipsec/nss(/.*)?,           /etc/strongswan/ipsec.d(/.*)?,
329            /etc/strongswan/swanctl/rsa(/.*)?, /etc/strongswan/swanctl/pkcs.*,
330            /etc/strongswan/swanctl/x509.*,   /etc/strongswan/ipsec.secrets.*,
331            /etc/strongswan/swanctl/ecdsa(/.*)?,
332            /etc/strongswan/swanctl/bliss/(/.*)?, /etc/strongswan/swanctl/pub‐
333            key(/.*)?,                  /etc/strongswan/swanctl/private(/.*)?,
334            /etc/racoon/psk.txt
335
336
337       ipsec_log_t
338
339       - Set files with the ipsec_log_t type, if you want to treat the data as
340       ipsec log data, usually stored under the /var/log directory.
341
342
343
344       ipsec_mgmt_devpts_t
345
346       - Set files with the ipsec_mgmt_devpts_t type, if you want to treat the
347       files as ipsec mgmt devpts data.
348
349
350
351       ipsec_mgmt_exec_t
352
353       - Set files with the ipsec_mgmt_exec_t type, if you want to  transition
354       an executable to the ipsec_mgmt_t domain.
355
356
357       Paths:
358            /usr/sbin/ipsec,      /usr/sbin/swanctl,     /usr/sbin/strongimcv,
359            /usr/sbin/strongswan,                    /usr/lib/ipsec/_plutorun,
360            /usr/lib/ipsec/_plutoload,           /usr/libexec/ipsec/_plutorun,
361            /usr/libexec/ipsec/_plutoload,   /usr/libexec/nm-openswan-service,
362            /usr/libexec/nm-libreswan-service
363
364
365       ipsec_mgmt_lock_t
366
367       -  Set  files with the ipsec_mgmt_lock_t type, if you want to treat the
368       files as ipsec mgmt lock data, stored under the /var/lock directory
369
370
371       Paths:
372            /var/lock/subsys/ipsec, /var/lock/subsys/strongswan
373
374
375       ipsec_mgmt_unit_file_t
376
377       - Set files with the ipsec_mgmt_unit_file_t type, if you want to  treat
378       the files as ipsec mgmt unit content.
379
380
381       Paths:
382            /usr/lib/systemd/system/ipsec.*,             /usr/lib/systemd/sys‐
383            tem/strongimcv.*,            /usr/lib/systemd/system/strongswan.*,
384            /usr/lib/systemd/system/strongswan-swanctl.*
385
386
387       ipsec_mgmt_var_run_t
388
389       -  Set  files  with the ipsec_mgmt_var_run_t type, if you want to store
390       the ipsec mgmt files under the /run or /var/run directory.
391
392
393       Paths:
394            /var/run/pluto/ipsec.info, /var/run/pluto/ipsec_setup.pid
395
396
397       ipsec_tmp_t
398
399       - Set files with the ipsec_tmp_t type, if you want to store ipsec  tem‐
400       porary files in the /tmp directories.
401
402
403
404       ipsec_var_run_t
405
406       -  Set  files  with  the ipsec_var_run_t type, if you want to store the
407       ipsec files under the /run or /var/run directory.
408
409
410       Paths:
411            /var/racoon(/.*)?,    /var/run/pluto(/.*)?,     /var/run/charon.*,
412            /var/run/strongswan(/.*)?,                    /var/run/racoon.pid,
413            /var/run/charon.ctl, /var/run/charon.dck, /var/run/charon.vici
414
415
416       Note: File context can be temporarily modified with the chcon  command.
417       If  you want to permanently change the file context you need to use the
418       semanage fcontext command.  This will modify the SELinux labeling data‐
419       base.  You will need to use restorecon to apply the labels.
420
421

COMMANDS

423       semanage  fcontext  can also be used to manipulate default file context
424       mappings.
425
426       semanage permissive can also be used to manipulate  whether  or  not  a
427       process type is permissive.
428
429       semanage  module can also be used to enable/disable/install/remove pol‐
430       icy modules.
431
432       semanage port can also be used to manipulate the port definitions
433
434       semanage boolean can also be used to manipulate the booleans
435
436
437       system-config-selinux is a GUI tool available to customize SELinux pol‐
438       icy settings.
439
440

AUTHOR

442       This manual page was auto-generated using sepolicy manpage .
443
444