1modemmanager_selinux(8) SELinux Policy modemmanager modemmanager_selinux(8)
2
6 modemmanager_selinux - Security Enhanced Linux Policy for the modemman‐
7 ager processes
8
10 Security-Enhanced Linux secures the modemmanager processes via flexible
11 mandatory access control.
12 The modemmanager processes execute with the modemmanager_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep modemmanager_t
20
24 The modemmanager_t SELinux type can be entered via the modemman‐
25 ager_exec_t file type.
26 The default entrypoint paths for the modemmanager_t domain are the fol‐
28 lowing:
29 /usr/sbin/ModemManager, /usr/sbin/modem-manager
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 modemmanager policy is very flexible allowing users to setup their
40 modemmanager processes in as secure a method as possible.
41 The following process types are defined for modemmanager:
43 modemmanager_t
45 Note: semanage permissive -a modemmanager_t can be used to make the
47 process type modemmanager_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. modem‐
54 manager policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run modemmanager with the tightest
56 access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type modemmanager_t can manage files labeled with
69 the following file types. The paths listed are the default paths for
70 these file types. Note the processes UID still need to have DAC per‐
71 missions.
72 cluster_conf_t
74 /etc/cluster(/.*)?
76 cluster_var_lib_t
78 /var/lib/pcsd(/.*)?
80 /var/lib/cluster(/.*)?
81 /var/lib/openais(/.*)?
82 /var/lib/pengine(/.*)?
83 /var/lib/corosync(/.*)?
84 /usr/lib/heartbeat(/.*)?
85 /var/lib/heartbeat(/.*)?
86 /var/lib/pacemaker(/.*)?
87 cluster_var_run_t
89 /var/run/crm(/.*)?
91 /var/run/cman_.*
92 /var/run/rsctmp(/.*)?
93 /var/run/aisexec.*
94 /var/run/heartbeat(/.*)?
95 /var/run/pcsd-ruby.socket
96 /var/run/corosync-qnetd(/.*)?
97 /var/run/corosync-qdevice(/.*)?
98 /var/run/corosync.pid
99 /var/run/cpglockd.pid
100 /var/run/rgmanager.pid
101 /var/run/cluster/rgmanager.sk
102 root_t
104 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
106 /
107 /initrd
108 sysfs_t
110 /sys(/.*)?
112 udev_var_run_t
114 /dev/.udev(/.*)?
116 /var/run/udev(/.*)?
117 /var/run/libgpod(/.*)?
118 /var/run/PackageKit/udev(/.*)?
119 /dev/.udevdb
120 /dev/udev.tbl
121
124 SELinux requires files to have an extended attribute to define the file
125 type.
126 You can see the context of a file using the -Z option to ls
128 Policy governs the access confined processes have to these files.
130 SELinux modemmanager policy is very flexible allowing users to setup
131 their modemmanager processes in as secure a method as possible.
132 STANDARD FILE CONTEXT
134 SELinux defines the file context types for the modemmanager, if you
136 wanted to store files with these types in a diffent paths, you need to
137 execute the semanage command to sepecify alternate labeling and then
138 use restorecon to put the labels on disk.
139 semanage fcontext -a -t modemmanager_unit_file_t '/srv/mymodemman‐
141 ager_content(/.*)?'
142 restorecon -R -v /srv/mymodemmanager_content
143 Note: SELinux often uses regular expressions to specify labels that
145 match multiple files.
146 The following file types are defined for modemmanager:
148 modemmanager_exec_t
152 - Set files with the modemmanager_exec_t type, if you want to transi‐
154 tion an executable to the modemmanager_t domain.
155 Paths:
158 /usr/sbin/ModemManager, /usr/sbin/modem-manager
159 modemmanager_unit_file_t
162 - Set files with the modemmanager_unit_file_t type, if you want to
164 treat the files as modemmanager unit content.
165 Note: File context can be temporarily modified with the chcon command.
169 If you want to permanently change the file context you need to use the
170 semanage fcontext command. This will modify the SELinux labeling data‐
171 base. You will need to use restorecon to apply the labels.
172
175 semanage fcontext can also be used to manipulate default file context
176 mappings.
177 semanage permissive can also be used to manipulate whether or not a
179 process type is permissive.
180 semanage module can also be used to enable/disable/install/remove pol‐
182 icy modules.
183 semanage boolean can also be used to manipulate the booleans
185 system-config-selinux is a GUI tool available to customize SELinux pol‐
188 icy settings.
189
192 This manual page was auto-generated using sepolicy manpage .
193
196 selinux(8), modemmanager(8), semanage(8), restorecon(8), chcon(1), se‐
197 policy(8), setsebool(8)
198modemmanager 21-06-09 modemmanager_selinux(8)