1pam_mount(8) pam_mount 2.16 pam_mount(8)
2
6 pam_mount - A PAM module that can mount volumes for a user session
7
9 This module is aimed at environments with central file servers that a
10 user wishes to mount on login and unmount on logout, such as
11 (semi-)diskless stations where many users can logon and where stati‐
12 cally mounting the entire /home from a server is a security risk, or
13 listing all possible volumes in /etc/fstab is not feasible.
14 · Users can define their own list of volumes without having to change
16 (possibly non-writable) global config files.
17 · Single sign-on feature - the user needs to type the password just
19 once (at login)
20 · Transparent mount process
22 · No stored passwords
24 · Volumes are unmounted on logout, freeing system resources and not
26 leaving data exposed.
27 The module also supports mounting local filesystems of any kind the
29 normal mount utility supports, with extra code to make sure certain
30 volumes are set up properly because often they need more than just a
31 mount call, such as encrypted volumes. This includes SMB/CIFS, FUSE,
32 dm-crypt and LUKS.
33 If you intend to use pam_mount to protect volumes on your computer
35 using an encrypted filesystem system, please know that there are many
36 other issues you need to consider in order to protect your data. For
37 example, you probably want to disable or encrypt your swap partition
38 (the cryptoswap can help you do this). Do not assume a system is secure
39 without carefully considering potential threats.
40
42 The primary configuration file for the pam_mount module is
43 pam_mount.conf.xml. On most platforms this file is read from
44 /etc/security/pam_mount.conf.xml. On OpenBSD pam_mount reads its con‐
45 figuration file from /etc/pam_mount.conf.xml. See pam_mount.conf(5)
46 documenting its use.
47 Individual users may define additional volumes to mount if allowed by
49 pam_mount.conf.xml (usually ~/.pam_mount.conf.xml). The volume keyword
50 is the only valid keyword in these per-user configuration files. If the
51 luserconf parameter is set in pam_mount.conf.xml, allowing user-defined
52 volume, then users may mount and unmount any volume they own at any
53 mount point they own. On some filesystem configurations this may be a
54 security flaw so user-defined volumes are not allowed by the example
55 pam_mount.conf.xml distributed with pam_mount.
56
58 In addition, you must include two entries in the system's applicable
59 /etc/pam.d/service config files, as the following example shows:
60 auth required pam_securetty.so
62 auth required pam_pwdb.so shadow nullok
63 auth required pam_nologin.so
64 +++ auth optional pam_mount.so
65 account required pam_pwdb.so
66 password required pam_cracklib.so
67 password required pam_pwdb.so shadow nullok use_authtok
68 session required pam_pwdb.so
69 session optional pam_console.so
70 +++ session optional pam_mount.so
71 When "sufficient" is used in the second column, you must make sure that
73 pam_mount is added before this entry. Otherwise pam_mount will not get
74 executed should a previous PAM module succeed. Also be aware of the
75 "include" statements. These make PAM look into the specified file. If
76 there is a "sufficient" statement, then the pam_mount entry must either
77 be in the included file before the "sufficient" statement or before the
78 "include" statement.
79 If you use pam_ldap, pam_winbind, or any other authentication services
81 that make use of PAM's sufficient keyword, model your configuration on
82 the following order:
83 ···
85 account sufficient pam_ldap.so
86 auth required pam_mount.so
87 auth sufficient pam_ldap.so use_first_pass
88 auth required pam_unix.so use_first_pass
89 session optional pam_mount.so
90 ···
91 This allows for:
93 1. pam_mount, as the first "auth" module, will prompt for a password
95 and export it to the PAM system.
96 2. pam_ldap will use the password from the PAM system to try and
98 authenticate the user. If this succedes, the user will be authenti‐
99 cated. If it fails, pam_unix will try to authenticate.
100 3. pam_unix will try to authenticate the user if pam_ldap failed. If
102 pam_unix fails, then the authentication will be refused (due to the
103 "required").
104 Alternatively, the following is possible (thanks to Andrew Morgan for
106 the hint!):
107 auth [success=2 default=ignore] pam_unix2.so
109 auth [success=1 default=ignore] pam_ldap.so use_first_pass
110 auth requisite pam_deny.so
111 auth optional pam_mount.so
112 It may seem odd, but the first three lines will make it so that at
114 least one of pam_unix2 or pam_ldap has to succeed. As you can see,
115 pam_mount will be run after successful authentification with these sub‐
116 systems.
117
119 pam_mount supports a few types of crypto. The most common are encfs,
120 dm-crypt and dm-crypt+LUKS.
121 The first one uses the FUSE layer; files within the encfs container are
123 stored as single encrypted files on the host in a previously-existing
124 directory. If you store lots of files, it is recommended to have a
125 lower filesystem that is strong in this area, such as xfs, but some
126 software and/or your partitioning decisions may force you to use a dif‐
127 ferent fs. The 1:1 mapping of files also allows encrypted files to be
128 reasonably efficiently rsync'ed for example without having to open the
129 encrypted container. Creation is done through the encfs(1) tool.
130 dm-crypt provides whole-filesystem/entire-partition encryption. You can
132 also create a container file, but the idea is that it is represented as
133 a block device on which you still have to create a filesystem. In fact,
134 this way you can select a filesystem of your choice. The downside is
135 that shrinking is often not possible (there is no such issue in encfs
136 because it uses the lower fs). Suitable dm-crypt containers (and auxil‐
137 iary files), using block devices or plain files, can be created using
138 the pmt-ehd(8) tool.
139 pmt-ehd creates filesystem key material which is a bunch of random
141 bytes that will be used to en-/decrypt the volume. This material itself
142 is encrypted with your own password - this is done so that you can
143 change the password without having to reencrypt all of your data.
144 LUKS is an extension for dm-crypt to support multi-password containers.
146 Unless you specifically need it, the above two solutions are recom‐
147 mended.
148 NOTE: The key file that pmt-ehd(8) will create represents the filesys‐
150 tem key material as encrypted with your password. It is thus safe to
151 store this on an unsecured filesystem.
152
154 To ensure that your system and, possibly, the remote server are all
155 properly configured, you should try to mount all or some of the volumes
156 by hand, using the same commands and mount points provided in
157 pam_mount.conf.xml. This will save you a lot of grief, since it is more
158 difficult to debug the mounting process via pam_mount.
159 If you can mount the volumes by hand but it is not happening via
161 pam_mount, you may want to enable the "debug" option in
162 pam_mount.conf.xml to see what is happening.
163 Verify if the user owns the mount point and has sufficient permissions
165 over that. pam_mount will verify this and will refuse to mount the
166 remote volume if the user does not own that directory.
167 If pam_mount is having trouble unmounting volumes upon logging out,
169 enable the debug variable. This causes pam_mount to run ofl on logout
170 and write its output to the system's log.
171
173 W. Michael Petullo
174 Jan Engelhardt (current maintainer)
176
178 The following two forms of communication are available. The maintainer
179 has no preference, though you will reach more users who could answer by
180 means of the mailing list.
181 Mailing List:
183 http://sf.net/mail/?group_id=41452
184 Bug Tracker (no registration needed):
186 http://sf.net/tracker/?group_id=41452
187pam_mount 2.16 2016-09-23 pam_mount(8)