1rasdaemon_selinux(8) SELinux Policy rasdaemon rasdaemon_selinux(8)
2
6 rasdaemon_selinux - Security Enhanced Linux Policy for the rasdaemon
7 processes
8
10 Security-Enhanced Linux secures the rasdaemon processes via flexible
11 mandatory access control.
12 The rasdaemon processes execute with the rasdaemon_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep rasdaemon_t
20
24 The rasdaemon_t SELinux type can be entered via the rasdaemon_exec_t
25 file type.
26 The default entrypoint paths for the rasdaemon_t domain are the follow‐
28 ing:
29 /usr/sbin/rasdaemon, /usr/sbin/ras-mc-ctl
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 rasdaemon policy is very flexible allowing users to setup their rasdae‐
40 mon processes in as secure a method as possible.
41 The following process types are defined for rasdaemon:
43 rasdaemon_t
45 Note: semanage permissive -a rasdaemon_t can be used to make the
47 process type rasdaemon_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. rasdae‐
54 mon policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run rasdaemon with the tightest access
56 possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type rasdaemon_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cluster_conf_t
80 /etc/cluster(/.*)?
82 cluster_var_lib_t
84 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93 cluster_var_run_t
95 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/pcsd-ruby.socket
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108 debugfs_t
110 /sys/kernel/debug
112 krb5_host_rcache_t
114 /var/tmp/krb5_0.rcache2
116 /var/cache/krb5rcache(/.*)?
117 /var/tmp/nfs_0
118 /var/tmp/DNS_25
119 /var/tmp/host_0
120 /var/tmp/imap_0
121 /var/tmp/HTTP_23
122 /var/tmp/HTTP_48
123 /var/tmp/ldap_55
124 /var/tmp/ldap_487
125 /var/tmp/ldapmap1_0
126 rasdaemon_var_lib_t
128 /var/lib/rasdaemon(/.*)?
130 root_t
132 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
134 /
135 /initrd
136 tracefs_t
138 /sys/kernel/tracing
140
143 SELinux requires files to have an extended attribute to define the file
144 type.
145 You can see the context of a file using the -Z option to ls
147 Policy governs the access confined processes have to these files.
149 SELinux rasdaemon policy is very flexible allowing users to setup their
150 rasdaemon processes in as secure a method as possible.
151 STANDARD FILE CONTEXT
153 SELinux defines the file context types for the rasdaemon, if you wanted
155 to store files with these types in a diffent paths, you need to execute
156 the semanage command to sepecify alternate labeling and then use re‐
157 storecon to put the labels on disk.
158 semanage fcontext -a -t rasdaemon_unit_file_t '/srv/myrasdaemon_con‐
160 tent(/.*)?'
161 restorecon -R -v /srv/myrasdaemon_content
162 Note: SELinux often uses regular expressions to specify labels that
164 match multiple files.
165 The following file types are defined for rasdaemon:
167 rasdaemon_exec_t
171 - Set files with the rasdaemon_exec_t type, if you want to transition
173 an executable to the rasdaemon_t domain.
174 Paths:
177 /usr/sbin/rasdaemon, /usr/sbin/ras-mc-ctl
178 rasdaemon_unit_file_t
181 - Set files with the rasdaemon_unit_file_t type, if you want to treat
183 the files as rasdaemon unit content.
184 Paths:
187 /usr/lib/systemd/system/rasdaemon.*, /usr/lib/systemd/system/ras-
188 mc-ctl.*
189 rasdaemon_var_lib_t
192 - Set files with the rasdaemon_var_lib_t type, if you want to store the
194 rasdaemon files under the /var/lib directory.
195 Note: File context can be temporarily modified with the chcon command.
199 If you want to permanently change the file context you need to use the
200 semanage fcontext command. This will modify the SELinux labeling data‐
201 base. You will need to use restorecon to apply the labels.
202
205 semanage fcontext can also be used to manipulate default file context
206 mappings.
207 semanage permissive can also be used to manipulate whether or not a
209 process type is permissive.
210 semanage module can also be used to enable/disable/install/remove pol‐
212 icy modules.
213 semanage boolean can also be used to manipulate the booleans
215 system-config-selinux is a GUI tool available to customize SELinux pol‐
218 icy settings.
219
222 This manual page was auto-generated using sepolicy manpage .
223
226 selinux(8), rasdaemon(8), semanage(8), restorecon(8), chcon(1), sepol‐
227 icy(8), setsebool(8)
228rasdaemon 21-06-09 rasdaemon_selinux(8)