1svnserve_selinux(8) SELinux Policy svnserve svnserve_selinux(8)
2
3
4
6 svnserve_selinux - Security Enhanced Linux Policy for the svnserve pro‐
7 cesses
8
10 Security-Enhanced Linux secures the svnserve processes via flexible
11 mandatory access control.
12
13 The svnserve processes execute with the svnserve_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep svnserve_t
20
21
22
24 The svnserve_t SELinux type can be entered via the svnserve_exec_t file
25 type.
26
27 The default entrypoint paths for the svnserve_t domain are the follow‐
28 ing:
29
30 /usr/bin/svnserve
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 svnserve policy is very flexible allowing users to setup their svnserve
40 processes in as secure a method as possible.
41
42 The following process types are defined for svnserve:
43
44 svnserve_t
45
46 Note: semanage permissive -a svnserve_t can be used to make the process
47 type svnserve_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required.
54 svnserve policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run svnserve with the tightest ac‐
56 cess possible.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
67 If you want to allow confined applications to run with kerberos, you
68 must turn on the kerberos_enabled boolean. Enabled by default.
69
70 setsebool -P kerberos_enabled 1
71
72
73
75 The SELinux process type svnserve_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78
79 cluster_conf_t
80
81 /etc/cluster(/.*)?
82
83 cluster_var_lib_t
84
85 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93
94 cluster_var_run_t
95
96 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/pcsd-ruby.socket
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108
109 krb5_host_rcache_t
110
111 /var/tmp/krb5_0.rcache2
112 /var/cache/krb5rcache(/.*)?
113 /var/tmp/nfs_0
114 /var/tmp/DNS_25
115 /var/tmp/host_0
116 /var/tmp/imap_0
117 /var/tmp/HTTP_23
118 /var/tmp/HTTP_48
119 /var/tmp/ldap_55
120 /var/tmp/ldap_487
121 /var/tmp/ldapmap1_0
122
123 root_t
124
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
129 security_t
130
131 /selinux
132
133 svnserve_content_t
134
135 /var/svn(/.*)?
136 /var/subversion/repo(/.*)?
137 /var/lib/subversion/repo(/.*)?
138
139 svnserve_log_t
140
141 /var/log/svnserve(/.*)?
142
143 svnserve_tmp_t
144
145
146 svnserve_var_run_t
147
148 /var/run/svnserve.pid
149 /var/run/svnserve(/.*)?
150
151
153 SELinux requires files to have an extended attribute to define the file
154 type.
155
156 You can see the context of a file using the -Z option to ls
157
158 Policy governs the access confined processes have to these files.
159 SELinux svnserve policy is very flexible allowing users to setup their
160 svnserve processes in as secure a method as possible.
161
162 EQUIVALENCE DIRECTORIES
163
164
165 svnserve policy stores data with multiple different file context types
166 under the /var/run/svnserve directory. If you would like to store the
167 data in a different directory you can use the semanage command to cre‐
168 ate an equivalence mapping. If you wanted to store this data under the
169 /srv directory you would execute the following command:
170
171 semanage fcontext -a -e /var/run/svnserve /srv/svnserve
172 restorecon -R -v /srv/svnserve
173
174 STANDARD FILE CONTEXT
175
176 SELinux defines the file context types for the svnserve, if you wanted
177 to store files with these types in a diffent paths, you need to execute
178 the semanage command to sepecify alternate labeling and then use re‐
179 storecon to put the labels on disk.
180
181 semanage fcontext -a -t svnserve_log_t '/srv/mysvnserve_content(/.*)?'
182 restorecon -R -v /srv/mysvnserve_content
183
184 Note: SELinux often uses regular expressions to specify labels that
185 match multiple files.
186
187 The following file types are defined for svnserve:
188
189
190
191 svnserve_content_t
192
193 - Set files with the svnserve_content_t type, if you want to treat the
194 files as svnserve content.
195
196
197 Paths:
198 /var/svn(/.*)?, /var/subversion/repo(/.*)?, /var/lib/subver‐
199 sion/repo(/.*)?
200
201
202 svnserve_exec_t
203
204 - Set files with the svnserve_exec_t type, if you want to transition an
205 executable to the svnserve_t domain.
206
207
208
209 svnserve_initrc_exec_t
210
211 - Set files with the svnserve_initrc_exec_t type, if you want to tran‐
212 sition an executable to the svnserve_initrc_t domain.
213
214
215
216 svnserve_log_t
217
218 - Set files with the svnserve_log_t type, if you want to treat the data
219 as svnserve log data, usually stored under the /var/log directory.
220
221
222
223 svnserve_tmp_t
224
225 - Set files with the svnserve_tmp_t type, if you want to store svnserve
226 temporary files in the /tmp directories.
227
228
229
230 svnserve_unit_file_t
231
232 - Set files with the svnserve_unit_file_t type, if you want to treat
233 the files as svnserve unit content.
234
235
236 Paths:
237 /lib/systemd/system/svnserve.service, /usr/lib/systemd/sys‐
238 tem/svnserve.service
239
240
241 svnserve_var_run_t
242
243 - Set files with the svnserve_var_run_t type, if you want to store the
244 svnserve files under the /run or /var/run directory.
245
246
247 Paths:
248 /var/run/svnserve.pid, /var/run/svnserve(/.*)?
249
250
251 Note: File context can be temporarily modified with the chcon command.
252 If you want to permanently change the file context you need to use the
253 semanage fcontext command. This will modify the SELinux labeling data‐
254 base. You will need to use restorecon to apply the labels.
255
256
258 semanage fcontext can also be used to manipulate default file context
259 mappings.
260
261 semanage permissive can also be used to manipulate whether or not a
262 process type is permissive.
263
264 semanage module can also be used to enable/disable/install/remove pol‐
265 icy modules.
266
267 semanage boolean can also be used to manipulate the booleans
268
269
270 system-config-selinux is a GUI tool available to customize SELinux pol‐
271 icy settings.
272
273
275 This manual page was auto-generated using sepolicy manpage .
276
277
279 selinux(8), svnserve(8), semanage(8), restorecon(8), chcon(1), sepol‐
280 icy(8), setsebool(8)
281
282
283
284svnserve 21-06-09 svnserve_selinux(8)