1SYSTEMD-CRYPTSETUP-GENERATsOyRs(t8e)md-cryptsetup-geneSrYaStToErMD-CRYPTSETUP-GENERATOR(8)
2
6 systemd-cryptsetup-generator - Unit generator for /etc/crypttab
7
9 /usr/lib/systemd/system-generators/systemd-cryptsetup-generator
10
12 systemd-cryptsetup-generator is a generator that translates
13 /etc/crypttab into native systemd units early at boot and when
14 configuration of the system manager is reloaded. This will create
15 systemd-cryptsetup@.service(8) units as necessary.
16 systemd-cryptsetup-generator implements systemd.generator(7).
18
20 systemd-cryptsetup-generator understands the following kernel command
21 line parameters:
22 luks=, rd.luks=
24 Takes a boolean argument. Defaults to "yes". If "no", disables the
25 generator entirely. rd.luks= is honored only by initial RAM disk
26 (initrd) while luks= is honored by both the main system and the
27 initrd.
28 luks.crypttab=, rd.luks.crypttab=
30 Takes a boolean argument. Defaults to "yes". If "no", causes the
31 generator to ignore any devices configured in /etc/crypttab
32 (luks.uuid= will still work however). rd.luks.crypttab= is honored
33 only by initial RAM disk (initrd) while luks.crypttab= is honored
34 by both the main system and the initrd.
35 luks.uuid=, rd.luks.uuid=
37 Takes a LUKS superblock UUID as argument. This will activate the
38 specified device as part of the boot process as if it was listed in
39 /etc/crypttab. This option may be specified more than once in order
40 to set up multiple devices. rd.luks.uuid= is honored only by
41 initial RAM disk (initrd) while luks.uuid= is honored by both the
42 main system and the initrd.
43 If /etc/crypttab contains entries with the same UUID, then the
45 name, keyfile and options specified there will be used. Otherwise,
46 the device will have the name "luks-UUID".
47 If /etc/crypttab exists, only those UUIDs specified on the kernel
49 command line will be activated in the initrd or the real root.
50 luks.name=, rd.luks.name=
52 Takes a LUKS super block UUID followed by an "=" and a name. This
53 implies rd.luks.uuid= or luks.uuid= and will additionally make the
54 LUKS device given by the UUID appear under the provided name.
55 This parameter is the analogue of the first crypttab(5) field
57 volume-name.
58 rd.luks.name= is honored only by initial RAM disk (initrd) while
60 luks.name= is honored by both the main system and the initrd.
61 luks.data=, rd.luks.data=
63 Takes a LUKS super block UUID followed by a "=" and a block device
64 specification for device hosting encrypted data.
65 For those entries specified with rd.luks.uuid= or luks.uuid=, the
67 data device will be set to the one specified by rd.luks.data= or
68 luks.data= of the corresponding UUID.
69 LUKS data device parameter is useful for specifying encrypted data
71 devices with detached headers specified in luks.options entry
72 containing "header=" argument. For example,
73 rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
74 rd.luks.options=b40f1abf-2a53-400a-889a-2eccc27eaa40=header=/path/to/luks.hdr
75 rd.luks.data=b40f1abf-2a53-400a-889a-2eccc27eaa40=/dev/sdx. Hence,
76 in this case, we will attempt to unlock LUKS device assembled from
77 data device "/dev/sdx" and LUKS header (metadata) put in
78 "/path/to/luks.hdr" file. This syntax is for now only supported on
79 a per-device basis, i.e. you have to specify LUKS device UUID.
80 This parameter is the analogue of the second crypttab(5) field
82 encrypted-device.
83 rd.luks.data= is honored only by initial RAM disk (initrd) while
85 luks.data= is honored by both the main system and the initrd.
86 luks.key=, rd.luks.key=
88 Takes a password file name as argument or a LUKS super block UUID
89 followed by a "=" and a password file name.
90 For those entries specified with rd.luks.uuid= or luks.uuid=, the
92 password file will be set to the one specified by rd.luks.key= or
93 luks.key= of the corresponding UUID, or the password file that was
94 specified without a UUID.
95 It is also possible to specify an external device which should be
97 mounted before we attempt to unlock the LUKS device.
98 systemd-cryptsetup will use password file stored on that device.
99 Device containing password file is specified by appending colon and
100 a device identifier to the password file path. For example,
101 rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
102 rd.luks.key=b40f1abf-2a53-400a-889a-2eccc27eaa40=/keyfile:LABEL=keydev.
103 Hence, in this case, we will attempt to mount file system residing
104 on the block device with label "keydev". This syntax is for now
105 only supported on a per-device basis, i.e. you have to specify LUKS
106 device UUID.
107 This parameter is the analogue of the third crypttab(5) field
109 key-file.
110 rd.luks.key= is honored only by initial RAM disk (initrd) while
112 luks.key= is honored by both the main system and the initrd.
113 luks.options=, rd.luks.options=
115 Takes a LUKS super block UUID followed by an "=" and a string of
116 options separated by commas as argument. This will override the
117 options for the given UUID.
118 If only a list of options, without an UUID, is specified, they
120 apply to any UUIDs not specified elsewhere, and without an entry in
121 /etc/crypttab.
122 This parameter is the analogue of the fourth crypttab(5) field
124 options.
125 It is possible to specify an external device which should be
127 mounted before we attempt to unlock the LUKS device.
128 systemd-cryptsetup will assemble LUKS device by combining data
129 device specified in luks.data with detached LUKS header found in
130 "header=" argument. For example,
131 rd.luks.uuid=b40f1abf-2a53-400a-889a-2eccc27eaa40
132 rd.luks.options=b40f1abf-2a53-400a-889a-2eccc27eaa40=header=/luks.hdr:LABEL=hdrdev
133 rd.luks.data=b40f1abf-2a53-400a-889a-2eccc27eaa40=/dev/sdx. Hence,
134 in this case, we will attempt to mount file system residing on the
135 block device with label "hdrdev", and look for "luks.hdr" on that
136 file system. Said header will be used to unlock (decrypt) encrypted
137 data stored on /dev/sdx. This syntax is for now only supported on a
138 per-device basis, i.e. you have to specify LUKS device UUID.
139 rd.luks.options= is honored only by initial RAM disk (initrd) while
141 luks.options= is honored by both the main system and the initrd.
142
144 systemd(1), crypttab(5), systemd-cryptsetup@.service(8), systemd-
145 cryptenroll(1), cryptsetup(8), systemd-fstab-generator(8)
146systemd 248 SYSTEMD-CRYPTSETUP-GENERATOR(8)