1systemd_hwdb_selinux(8) SELinux Policy systemd_hwdb systemd_hwdb_selinux(8)
2
6 systemd_hwdb_selinux - Security Enhanced Linux Policy for the sys‐
7 temd_hwdb processes
8
10 Security-Enhanced Linux secures the systemd_hwdb processes via flexible
11 mandatory access control.
12 The systemd_hwdb processes execute with the systemd_hwdb_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep systemd_hwdb_t
20
24 The systemd_hwdb_t SELinux type can be entered via the sys‐
25 temd_hwdb_exec_t file type.
26 The default entrypoint paths for the systemd_hwdb_t domain are the fol‐
28 lowing:
29 /usr/bin/systemd-hwdb
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 systemd_hwdb policy is very flexible allowing users to setup their sys‐
40 temd_hwdb processes in as secure a method as possible.
41 The following process types are defined for systemd_hwdb:
43 systemd_hwdb_t
45 Note: semanage permissive -a systemd_hwdb_t can be used to make the
47 process type systemd_hwdb_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. sys‐
54 temd_hwdb policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run systemd_hwdb with the tight‐
56 est access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type systemd_hwdb_t can manage files labeled with
76 the following file types. The paths listed are the default paths for
77 these file types. Note the processes UID still need to have DAC per‐
78 missions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/pcsd-ruby.socket
103 /var/run/corosync-qnetd(/.*)?
104 /var/run/corosync-qdevice(/.*)?
105 /var/run/corosync.pid
106 /var/run/cpglockd.pid
107 /var/run/rgmanager.pid
108 /var/run/cluster/rgmanager.sk
109 krb5_host_rcache_t
111 /var/tmp/krb5_0.rcache2
113 /var/cache/krb5rcache(/.*)?
114 /var/tmp/nfs_0
115 /var/tmp/DNS_25
116 /var/tmp/host_0
117 /var/tmp/imap_0
118 /var/tmp/HTTP_23
119 /var/tmp/HTTP_48
120 /var/tmp/ldap_55
121 /var/tmp/ldap_487
122 /var/tmp/ldapmap1_0
123 root_t
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127 /
128 /initrd
129 systemd_hwdb_etc_t
131 /etc/udev/.*hwdb.*
133
136 SELinux requires files to have an extended attribute to define the file
137 type.
138 You can see the context of a file using the -Z option to ls
140 Policy governs the access confined processes have to these files.
142 SELinux systemd_hwdb policy is very flexible allowing users to setup
143 their systemd_hwdb processes in as secure a method as possible.
144 STANDARD FILE CONTEXT
146 SELinux defines the file context types for the systemd_hwdb, if you
148 wanted to store files with these types in a diffent paths, you need to
149 execute the semanage command to sepecify alternate labeling and then
150 use restorecon to put the labels on disk.
151 semanage fcontext -a -t systemd_hwdb_etc_t '/srv/mysystemd_hwdb_con‐
153 tent(/.*)?'
154 restorecon -R -v /srv/mysystemd_hwdb_content
155 Note: SELinux often uses regular expressions to specify labels that
157 match multiple files.
158 The following file types are defined for systemd_hwdb:
160 systemd_hwdb_etc_t
164 - Set files with the systemd_hwdb_etc_t type, if you want to store sys‐
166 temd hwdb files in the /etc directories.
167 systemd_hwdb_exec_t
171 - Set files with the systemd_hwdb_exec_t type, if you want to transi‐
173 tion an executable to the systemd_hwdb_t domain.
174 systemd_hwdb_unit_file_t
178 - Set files with the systemd_hwdb_unit_file_t type, if you want to
180 treat the files as systemd hwdb unit content.
181 Note: File context can be temporarily modified with the chcon command.
185 If you want to permanently change the file context you need to use the
186 semanage fcontext command. This will modify the SELinux labeling data‐
187 base. You will need to use restorecon to apply the labels.
188
191 semanage fcontext can also be used to manipulate default file context
192 mappings.
193 semanage permissive can also be used to manipulate whether or not a
195 process type is permissive.
196 semanage module can also be used to enable/disable/install/remove pol‐
198 icy modules.
199 semanage boolean can also be used to manipulate the booleans
201 system-config-selinux is a GUI tool available to customize SELinux pol‐
204 icy settings.
205
208 This manual page was auto-generated using sepolicy manpage .
209
212 selinux(8), systemd_hwdb(8), semanage(8), restorecon(8), chcon(1), se‐
213 policy(8), setsebool(8)
214systemd_hwdb 21-06-09 systemd_hwdb_selinux(8)