1systemd_rfkill_selinux(8)SELinux Policy systemd_rfkillsystemd_rfkill_selinux(8)
2
3
4

NAME

6       systemd_rfkill_selinux  -  Security  Enhanced Linux Policy for the sys‐
7       temd_rfkill processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the systemd_rfkill processes via flexi‐
11       ble mandatory access control.
12
13       The  systemd_rfkill processes execute with the systemd_rfkill_t SELinux
14       type. You can check if you have these processes  running  by  executing
15       the ps command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep systemd_rfkill_t
20
21
22

ENTRYPOINTS

24       The   systemd_rfkill_t  SELinux  type  can  be  entered  via  the  sys‐
25       temd_rfkill_exec_t file type.
26
27       The default entrypoint paths for the systemd_rfkill_t  domain  are  the
28       following:
29
30       /usr/lib/systemd/systemd-rfkill
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       systemd_rfkill  policy  is  very flexible allowing users to setup their
40       systemd_rfkill processes in as secure a method as possible.
41
42       The following process types are defined for systemd_rfkill:
43
44       systemd_rfkill_t
45
46       Note: semanage permissive -a systemd_rfkill_t can be used to  make  the
47       process  type systemd_rfkill_t permissive. SELinux does not deny access
48       to permissive process types, but the AVC (SELinux denials) messages are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable based on least access required.  sys‐
54       temd_rfkill policy is extremely flexible and has several booleans  that
55       allow  you  to  manipulate  the  policy and run systemd_rfkill with the
56       tightest access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type systemd_rfkill_t can manage files labeled with
76       the  following  file types.  The paths listed are the default paths for
77       these file types.  Note the processes UID still need to have  DAC  per‐
78       missions.
79
80       cluster_conf_t
81
82            /etc/cluster(/.*)?
83
84       cluster_var_lib_t
85
86            /var/lib/pcsd(/.*)?
87            /var/lib/cluster(/.*)?
88            /var/lib/openais(/.*)?
89            /var/lib/pengine(/.*)?
90            /var/lib/corosync(/.*)?
91            /usr/lib/heartbeat(/.*)?
92            /var/lib/heartbeat(/.*)?
93            /var/lib/pacemaker(/.*)?
94
95       cluster_var_run_t
96
97            /var/run/crm(/.*)?
98            /var/run/cman_.*
99            /var/run/rsctmp(/.*)?
100            /var/run/aisexec.*
101            /var/run/heartbeat(/.*)?
102            /var/run/pcsd-ruby.socket
103            /var/run/corosync-qnetd(/.*)?
104            /var/run/corosync-qdevice(/.*)?
105            /var/run/corosync.pid
106            /var/run/cpglockd.pid
107            /var/run/rgmanager.pid
108            /var/run/cluster/rgmanager.sk
109
110       krb5_host_rcache_t
111
112            /var/tmp/krb5_0.rcache2
113            /var/cache/krb5rcache(/.*)?
114            /var/tmp/nfs_0
115            /var/tmp/DNS_25
116            /var/tmp/host_0
117            /var/tmp/imap_0
118            /var/tmp/HTTP_23
119            /var/tmp/HTTP_48
120            /var/tmp/ldap_55
121            /var/tmp/ldap_487
122            /var/tmp/ldapmap1_0
123
124       root_t
125
126            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127            /
128            /initrd
129
130       systemd_rfkill_var_lib_t
131
132            /var/lib/systemd/rfkill(/.*)?
133
134

FILE CONTEXTS

136       SELinux requires files to have an extended attribute to define the file
137       type.
138
139       You can see the context of a file using the -Z option to ls
140
141       Policy governs the access  confined  processes  have  to  these  files.
142       SELinux  systemd_rfkill policy is very flexible allowing users to setup
143       their systemd_rfkill processes in as secure a method as possible.
144
145       STANDARD FILE CONTEXT
146
147       SELinux defines the file context types for the systemd_rfkill,  if  you
148       wanted  to store files with these types in a diffent paths, you need to
149       execute the semanage command to sepecify alternate  labeling  and  then
150       use restorecon to put the labels on disk.
151
152       semanage   fcontext   -a   -t   systemd_rfkill_var_lib_t   '/srv/mysys‐
153       temd_rfkill_content(/.*)?'
154       restorecon -R -v /srv/mysystemd_rfkill_content
155
156       Note: SELinux often uses regular expressions  to  specify  labels  that
157       match multiple files.
158
159       The following file types are defined for systemd_rfkill:
160
161
162
163       systemd_rfkill_exec_t
164
165       - Set files with the systemd_rfkill_exec_t type, if you want to transi‐
166       tion an executable to the systemd_rfkill_t domain.
167
168
169
170       systemd_rfkill_unit_file_t
171
172       - Set files with the systemd_rfkill_unit_file_t type, if  you  want  to
173       treat the files as systemd rfkill unit content.
174
175
176
177       systemd_rfkill_var_lib_t
178
179       -  Set  files  with  the  systemd_rfkill_var_lib_t type, if you want to
180       store the systemd rfkill files under the /var/lib directory.
181
182
183
184       Note: File context can be temporarily modified with the chcon  command.
185       If  you want to permanently change the file context you need to use the
186       semanage fcontext command.  This will modify the SELinux labeling data‐
187       base.  You will need to use restorecon to apply the labels.
188
189

COMMANDS

191       semanage  fcontext  can also be used to manipulate default file context
192       mappings.
193
194       semanage permissive can also be used to manipulate  whether  or  not  a
195       process type is permissive.
196
197       semanage  module can also be used to enable/disable/install/remove pol‐
198       icy modules.
199
200       semanage boolean can also be used to manipulate the booleans
201
202
203       system-config-selinux is a GUI tool available to customize SELinux pol‐
204       icy settings.
205
206

AUTHOR

208       This manual page was auto-generated using sepolicy manpage .
209
210

SEE ALSO

212       selinux(8),  systemd_rfkill(8),  semanage(8),  restorecon(8), chcon(1),
213       sepolicy(8), setsebool(8)
214
215
216
217systemd_rfkill                     21-06-09          systemd_rfkill_selinux(8)
Impressum