1deb-buildinfo(5) dpkg suite deb-buildinfo(5)
2
6 deb-buildinfo - Debian build information file format
7
9 filename.buildinfo
10
12 Each Debian source package build can record the build information in a
13 .buildinfo control file, which contains a number of fields in deb822(5)
14 format.
15 Each field begins with a tag, such as Source or Binary (case
17 insensitive), followed by a colon, and the body of the field (case
18 sensitive unless stated otherwise). Fields are delimited only by field
19 tags. In other words, field text may be multiple lines in length, but
20 the installation tools will generally join lines when processing the
21 body of the field (except in case of the multiline fields Binary-Only-
22 Changes, Installed-Build-Depends, Environment, Checksums-Md5,
23 Checksums-Sha1 and Checksums-Sha256, see below).
24 The control data might be enclosed in an OpenPGP ASCII Armored
26 signature, as specified in RFC4880.
27 The name of the .buildinfo file will depend on the type of build and
29 will be as specific as necessary but not more; for a build that
30 includes any the name will be source-name_binary-
31 version_arch.buildinfo, or otherwise for a build that includes all the
32 name will be source-name_binary-version_all.buildinfo, or otherwise for
33 a build that includes source the name will be source-name_source-
34 version_source.buildinfo.
35
37 Format: format-version (required)
38 The value of this field declares the format version of the file.
39 The syntax of the field value is a version number with a major and
40 minor component. Backward incompatible changes to the format will
41 bump the major version, and backward compatible changes (such as
42 field additions) will bump the minor version. The current format
43 version is 1.0.
44 Source: source-name [(source-version)] (required)
46 The name of the source package. If the source version differs from
47 the binary version, then the source-name will be followed by a
48 source-version in parenthesis. This can happen when the build is
49 for a binary-only non-maintainer upload.
50 Binary: binary-package-list (required in context)
52 This folded field is a space-separated list of binary packages
53 built. If the build is source-only, then the field is omitted
54 (since dpkg 1.20.0).
55 Architecture: arch-list (required)
57 This space-separated field lists the architectures of the files
58 currently being built. Common architectures are amd64, armel,
59 i386, etc. Note that the all value is meant for packages that are
60 architecture independent. If the source for the package is also
61 being built, the special entry source is also present.
62 Architecture wildcards must never be present in the list.
63 Version: version-string (required)
65 Typically, this is the original package's version number in
66 whatever form the program's author uses. It may also include a
67 Debian revision number (for non-native packages). The exact format
68 and sorting algorithm are described in deb-version(7).
69 Binary-Only-Changes:
71 changelog-entry
72 This multiline field contains the concatenated text of the
73 changelog entry for a binary-only non-maintainer upload (binNMU) if
74 that is the case. To make this a valid multiline field empty lines
75 are replaced with a single full stop (‘.’) and all lines are
76 indented by one space character. The exact content depends on the
77 changelog format.
78 Checksums-Md5: (required)
80 Checksums-Sha1: (required)
81 Checksums-Sha256: (required)
82 checksum size filename
83 These multiline fields contain a list of files with a checksum and
84 size for each one. These fields have the same syntax and differ
85 only in the checksum algorithm used: MD5 for Checksums-Md5, SHA-1
86 for Checksums-Sha1 and SHA-256 for Checksums-Sha256.
87 The first line of the field value (the part on the same line as the
89 field name followed by a colon) is always empty. The content of
90 the field is expressed as continuation lines, one line per file.
91 Each line consists of space-separated entries describing the file:
92 the checksum, the file size, and the file name.
93 These fields list all files that make up the build.
95 Build-Origin: name
97 The name of the distribution this package is originating from.
98 Build-Architecture: arch (required)
100 The Debian architecture for the installation the packages is being
101 built in. Common architectures are amd64, armel, i386, etc.
102 Build-Date: build-date
104 The date the package was built. It must be in the same format as
105 the date in a deb-changelog(5) entry.
106 Build-Kernel-Version: build-kernel-version
108 The release and version (in an unspecified format) of the kernel
109 running on the build system. This field is only going to be
110 present if the builder has explicitly requested it, to avoid
111 leaking possibly sensitive information.
112 Build-Path: build-path
114 The absolute build path, which correspond to the unpacked source
115 tree. This field is only going to be present if the vendor has
116 allowed it via some pattern match to avoid leaking possibly
117 sensitive information.
118 On Debian and derivatives only build paths starting with /build/
120 will emit this field.
121 Build-Tainted-By:
123 taint-reason-list
124 This folded field contains a space-separated list of non-exhaustive
125 reason tags (formed by alphanumeric and dash characters) which
126 identify why the current build has been tainted (since dpkg
127 1.19.5).
128 On Debian and derivatives the following reason tags can be emitted:
130 merged-usr-via-aliased-dirs
132 The system has a merged /usr via aliased directories
133 (previously known as merged-usr-via-symlinks). This will
134 confuse dpkg-query, dpkg-statoverride, dpkg-trigger, update-
135 alternatives and any other tool using pathnames as keys into
136 their databases, as it creates filesystem aliasing problems,
137 and messes with the understanding of the filesystem that dpkg
138 has recorded in its database. For build systems that hardcode
139 pathnames to specific binaries or libraries on the resulting
140 artifacts, it can also produce packages that will be
141 incompatible with non-/usr-merged filesystems.
142 usr-local-has-configs
144 The system has configuration files under /usr/local/etc.
145 usr-local-has-includes
147 The system has header files under /usr/local/include.
148 usr-local-has-programs
150 The system has programs under /usr/local/bin or
151 /usr/local/sbin.
152 usr-local-has-libraries
154 The system has libraries, either static or shared under
155 /usr/local/lib.
156 Installed-Build-Depends: (required)
158 package-list
159 The list of installed and configured packages that might affect the
160 package build process.
161 The list consists of each package name, optionally arch-qualified
163 for foreign architectures, with an exact version restriction,
164 separated by commas.
165 The list includes all essential packages, packages listed in Build-
167 Depends, Build-Depends-Arch, Build-Depends-Indep source control
168 fields, any vendor specific builtin dependencies, and all their
169 recursive dependencies. On Debian and derivatives the dependency
170 builtin is build-essential.
171 For dependencies coming from the source control fields, all
173 dependency alternatives and all providers of virtual packages
174 depended on will be included.
175 Environment:
177 variable-list
178 The list of environment variables that are known to affect the
179 package build process, with each environment variable followed by
180 an equal sign (‘=’) and the variable's quoted value, using double
181 quotes (‘"’), and backslashes escaped (‘\\’).
182
184 deb822(5), deb-changes(5), deb-version(7), dpkg-genbuildinfo(1).
1851.20.9 2021-04-13 deb-buildinfo(5)