1FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
3
7 fence_ilo - Fence agent for HP iLO
8 fence_ilo2 - Fence agent for HP iLO2 (symlink)
10
13 fence_ilo is an I/O Fencing agent used for HP servers with the Inte‐
14 grated Light Out (iLO) PCI card.The agent opens an SSL connection to
15 the iLO card. Once the SSL connection is established, the agent is able
16 to communicate with the iLO card through an XML stream.
17 fence_ilo accepts options on the command line as well as from stdin.
19 Fenced sends parameters through stdin when it execs the agent.
20 fence_ilo can be run by itself with command line options. This is use‐
21 ful for testing and for turning outlets on or off from scripts.
22 Vendor URL: http://www.hp.com
24
26 -o, --action=[action]
29 Fencing action (Default Value: reboot)
30 -a, --ip=[ip]
32 IP address or hostname of fencing device
33 -u, --ipport=[port]
35 TCP/UDP port to use for connection with device (Default Value:
36 443)
37 -t, --notls
39 Disable TLS negotiation and force SSL3.0. This should only be
40 used for devices that do not support TLS1.0 and up.
41 -p, --password=[password]
44 Login password or passphrase
45 -S, --password-script=[script]
47 Script to run to retrieve password
48 -n, --plug=[ip]
50 IP address or hostname of fencing device (together with --port-
51 as-ip)
52 -r, --ribcl-version=[version]
54 Force ribcl version to use
55 -z, --ssl
57 Use SSL connection with verifying certificate (Default Value: 1)
58 --ssl-insecure
61 Use SSL connection without verifying certificate
62 --ssl-secure
64 Use SSL connection with verifying certificate
65 --tls1.0
67 Disable TLS negotiation and force TLS1.0. This should only be
68 used for devices that do not support TLS1.1 and up.
69 -l, --username=[name]
71 Login name This parameter is always required.
72 -q, --quiet
74 Disable logging to stderr. Does not affect --verbose or --debug-
75 file or logging to syslog.
76 -v, --verbose
78 Verbose mode. Multiple -v flags can be stacked on the command
79 line (e.g., -vvv) to increase verbosity.
80 --verbose-level
82 Level of debugging detail in output. Defaults to the number of
83 --verbose flags specified on the command line, or to 1 if ver‐
84 bose=1 in a stonith device configuration (i.e., on stdin).
85 -D, --debug-file=[debugfile]
88 Write debug information to given file
89 -V, --version
91 Display version information and exit
92 -h, --help
94 Display help and exit
95 --delay=[seconds]
97 Wait X seconds before fencing is started (Default Value: 0)
98 --disable-timeout=[true/false]
101 Disable timeout (true/false) (default: true when run from Pace‐
102 maker 2.0+)
103 --login-timeout=[seconds]
105 Wait X seconds for cmd prompt after login (Default Value: 10)
106 --port-as-ip
109 Make "port/plug" to be an alias to IP address
110 --power-timeout=[seconds]
112 Test X seconds for status change after ON/OFF (Default Value:
113 20)
114 --power-wait=[seconds]
116 Wait X seconds after issuing ON/OFF (Default Value: 0)
117 --shell-timeout=[seconds]
119 Wait X seconds for cmd prompt after issuing command (Default
120 Value: 3)
121 --stonith-status-sleep=[seconds]
123 Sleep X seconds between status calls during a STONITH action
124 (Default Value: 1)
125 --retry-on=[attempts]
127 Count of attempts to retry power on (Default Value: 3)
128 --gnutlscli-path=[path]
130 Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
131
134 on Power on machine.
137 off Power off machine.
139 reboot Reboot machine.
141 status This returns the status of the plug/virtual machine.
143 monitor
145 Check the health of fence device
146 metadata
148 Display the XML metadata describing this resource.
149 manpage
151 The operational behavior of this is not known.
152 validate-all
154 Validate if all required parameters are entered.
155
158 action Fencing action (Default Value: reboot)
161 ip IP address or hostname of fencing device Obsoletes: ipaddr
163 ipport TCP/UDP port to use for connection with device (Default Value:
166 443)
167 notls Disable TLS negotiation and force SSL3.0. This should only be
169 used for devices that do not support TLS1.0 and up.
170 password
173 Login password or passphrase Obsoletes: passwd
174 password_script
176 Script to run to retrieve password Obsoletes: passwd_script
177 plug IP address or hostname of fencing device (together with --port-
180 as-ip) Obsoletes: port
181 ribcl_version
183 Force ribcl version to use Obsoletes: ribcl
184 ssl Use SSL connection with verifying certificate (Default Value: 1)
186 ssl_insecure
189 Use SSL connection without verifying certificate
190 ssl_secure
192 Use SSL connection with verifying certificate
193 tls1.0 Disable TLS negotiation and force TLS1.0. This should only be
195 used for devices that do not support TLS1.1 and up.
196 username
198 Login name This parameter is always required. Obsoletes: login
199 quiet Disable logging to stderr. Does not affect --verbose or --debug-
202 file or logging to syslog.
203 verbose
205 Verbose mode. Multiple -v flags can be stacked on the command
206 line (e.g., -vvv) to increase verbosity.
207 verbose_level
209 Level of debugging detail in output. Defaults to the number of
210 --verbose flags specified on the command line, or to 1 if ver‐
211 bose=1 in a stonith device configuration (i.e., on stdin).
212 debug_file
215 Write debug information to given file Obsoletes: debug
216 version
218 Display version information and exit
219 help Display help and exit
221 delay Wait X seconds before fencing is started (Default Value: 0)
223 disable_timeout
226 Disable timeout (true/false) (default: true when run from Pace‐
227 maker 2.0+)
228 login_timeout
230 Wait X seconds for cmd prompt after login (Default Value: 10)
231 port_as_ip
234 Make "port/plug" to be an alias to IP address
235 power_timeout
237 Test X seconds for status change after ON/OFF (Default Value:
238 20)
239 power_wait
241 Wait X seconds after issuing ON/OFF (Default Value: 0)
242 shell_timeout
244 Wait X seconds for cmd prompt after issuing command (Default
245 Value: 3)
246 stonith_status_sleep
248 Sleep X seconds between status calls during a STONITH action
249 (Default Value: 1)
250 retry_on
252 Count of attempts to retry power on (Default Value: 3)
253 gnutlscli_path
255 Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
256fence_ilo (Fence Agent) 2009-10-20 FENCE_AGENT(8)