1List::Compare::FunctionUasle(r3)Contributed Perl DocumenLtiastti:o:nCompare::Functional(3)
2
6 List::Compare::Functional - Compare elements of two or more lists
7
9 This document refers to version 0.55 of List::Compare::Functional.
10 This version was released August 16 2020. The first released version
11 of List::Compare::Functional was v0.21. Its version numbers are set to
12 be consistent with the other parts of the List::Compare distribution.
13 Notice of Interface Changes
15 Certain significant changes to the interface to
16 List::Compare::Functional were made with the introduction of Version
17 0.25 in April 2004. The documentation immediately below reflects those
18 changes, so if you are first using this module with that or a later
19 version, simply read and follow the documentation below. If, however,
20 you used List::Compare::Functional prior to that version, see the
21 discussion of interface changes farther below: April 2004 Change of
22 Interface.
23
25 Getting Started
26 List::Compare::Functional exports no subroutines by default.
27 use List::Compare::Functional qw(:originals :aliases);
29 will import all publicly available subroutines from
31 List::Compare::Functional. The model for importing just one subroutine
32 from List::Compare::Functional is:
33 use List::Compare::Functional qw( get_intersection );
35 It will probably be most convenient for the user to import functions by
37 using one of the two following export tags:
38 use List::Compare::Functional qw(:main :mainrefs);
40 The assignment of the various comparison functions to export tags is
42 discussed below.
43 For clarity, we shall begin by discussing comparisons of just two lists
45 at a time. Farther below, we shall discuss comparisons among three or
46 more lists at a time.
47 Comparing Two Lists Held in Arrays
49 • Given two lists:
50 @Llist = qw(abel abel baker camera delta edward fargo golfer);
52 @Rlist = qw(baker camera delta delta edward fargo golfer hilton);
53 • Get those items which appear at least once in both lists (their
55 intersection).
56 @intersection = get_intersection( [ \@Llist, \@Rlist ] );
58 Note that you could place the references to the lists being
60 compared into a named array and then pass "get_intersection()" a
61 reference to that array.
62 @to_be_compared = ( \@Llist, \@Rlist );
64 @intersection = get_intersection( \@to_be_compared );
65 Beginning with version 0.29 (May 2004), List::Compare::Functional
67 now offers an additional way of passing arguments to its various
68 functions. If you prefer to see a more explicit delineation among
69 the types of arguments passed to a function, pass a single hash
70 reference which holds the lists being compared in an anonymous
71 array which is the value corresponding to key "lists":
72 @intersection = get_intersection( {
74 lists => [ \@Llist, \@Rlist ],
75 } );
76 • Get those items which appear at least once in either list (their
78 union).
79 @union = get_union( [ \@Llist, \@Rlist ] );
81 or
83 @union = get_union( { lists => [ \@Llist, \@Rlist ] } );
85 • Get those items which appear (at least once) only in the first
87 list.
88 @Lonly = get_unique( [ \@Llist, \@Rlist ] );
90 or
92 @Lonly = get_unique( { lists => [ \@Llist, \@Rlist ] } );
94 • Get those items which appear (at least once) only in the second
96 list.
97 @Ronly = get_complement( [ \@Llist, \@Rlist ] );
99 or
101 @Ronly = get_complement( { lists => [ \@Llist, \@Rlist ] } );
103 •
105 @LorRonly = get_symmetric_difference( [ \@Llist, \@Rlist ] );
108 @LorRonly = get_symdiff( [ \@Llist, \@Rlist ] ); # alias
110 or
112 @LorRonly = get_symmetric_difference( { lists => [ \@Llist, \@Rlist ] } );
114 • Make a bag of all those items in both lists. The bag differs from
116 the union of the two lists in that it holds as many copies of
117 individual elements as appear in the original lists.
118 @bag = get_bag( [ \@Llist, \@Rlist ] );
120 or
122 @bag = get_bag( { lists => [ \@Llist, \@Rlist ] } );
124 • An alternative approach to the above functions: If you do not
126 immediately require an array as the return value of the function
127 call, but simply need a reference to an (anonymous) array, use one
128 of the following parallel functions:
129 $intersection_ref = get_intersection_ref( [ \@Llist, \@Rlist ] );
131 $union_ref = get_union_ref( [ \@Llist, \@Rlist ] );
132 $Lonly_ref = get_unique_ref( [ \@Llist, \@Rlist ] );
133 $Ronly_ref = get_complement_ref( [ \@Llist, \@Rlist ] );
134 $LorRonly_ref = get_symmetric_difference_ref( [ \@Llist, \@Rlist ] );
135 $LorRonly_ref = get_symdiff_ref( [ \@Llist, \@Rlist ] );
136 # alias
137 $bag_ref = get_bag_ref( [ \@Llist, \@Rlist ] );
138 or
140 $intersection_ref =
142 get_intersection_ref( { lists => [ \@Llist, \@Rlist ] } );
143 $union_ref =
144 get_union_ref( { lists => [ \@Llist, \@Rlist ] } );
145 $Lonly_ref =
146 get_unique_ref( { lists => [ \@Llist, \@Rlist ] } );
147 $Ronly_ref =
148 get_complement_ref( { lists => [ \@Llist, \@Rlist ] } );
149 $LorRonly_ref =
150 get_symmetric_difference_ref( { lists => [ \@Llist, \@Rlist ] } );
151 $LorRonly_ref =
152 get_symdiff_ref( { lists => [ \@Llist, \@Rlist ] } );
153 # alias
154 $bag_ref =
155 get_bag_ref( { lists => [ \@Llist, \@Rlist ] } );
156 • Return a true value if the first list ('L' for 'left') is a subset
158 of the second list ('R' for 'right').
159 $LR = is_LsubsetR( [ \@Llist, \@Rlist ] );
161 or
163 $LR = is_LsubsetR( { lists => [ \@Llist, \@Rlist ] } );
165 • Return a true value if R is a subset of L.
167 $RL = is_RsubsetL( [ \@Llist, \@Rlist ] );
169 or
171 $RL = is_RsubsetL( { lists => [ \@Llist, \@Rlist ] } );
173 • Return a true value if L and R are equivalent, i.e., if every
175 element in L appears at least once in R and vice versa.
176 $eqv = is_LequivalentR( [ \@Llist, \@Rlist ] );
178 $eqv = is_LeqvlntR( [ \@Llist, \@Rlist ] ); # alias
179 or
181 $eqv = is_LequivalentR( { lists => [ \@Llist, \@Rlist ] } );
183 • Return a true value if L and R are disjoint, i.e., if L and R have
185 no common elements.
186 $disj = is_LdisjointR( [ \@Llist, \@Rlist ] );
188 or
190 $disj = is_LdisjointR( { lists => [ \@Llist, \@Rlist ] } );
192 • Pretty-print a chart showing whether one list is a subset of the
194 other.
195 print_subset_chart( [ \@Llist, \@Rlist ] );
197 or
199 print_subset_chart( { lists => [ \@Llist, \@Rlist ] } );
201 • Pretty-print a chart showing whether the two lists are equivalent
203 (same elements found at least once in both).
204 print_equivalence_chart( [ \@Llist, \@Rlist ] );
206 or
208 print_equivalence_chart( { lists => [ \@Llist, \@Rlist ] } );
210 • Determine in which (if any) of the lists a given string can be
212 found. In list context, return a list of those indices in the
213 argument list corresponding to lists holding the string being
214 tested.
215 @memb_arr = is_member_which( [ \@Llist, \@Rlist ] , [ 'abel' ] );
217 or
219 @memb_arr = is_member_which( {
221 lists => [ \@Llist, \@Rlist ], # value is array reference
222 item => 'abel', # value is string
223 } );
224 In the example above, @memb_arr will be:
226 ( 0 )
228 because 'abel' is found only in @Al which holds position 0 in the
230 list of arguments passed to "new()".
231 • As with other List::Compare::Functional functions which return a
233 list, you may wish the above function returned a (scalar) reference
234 to an array holding the list:
235 $memb_arr_ref = is_member_which_ref( [ \@Llist, \@Rlist ] , [ 'baker' ] );
237 or
239 $memb_arr_ref = is_member_which_ref( {
241 lists => [ \@Llist, \@Rlist ], # value is array reference
242 item => 'baker', # value is string
243 } );
244 In the example above, $memb_arr_ref will be:
246 [ 0, 1 ]
248 because 'baker' is found in @Llist and @Rlist, which hold positions
250 0 and 1, respectively, in the list of arguments passed to "new()".
251 Note: functions "is_member_which()" and "is_member_which_ref" test
253 only one string at a time and hence take only one argument. To
254 test more than one string at a time see the next function,
255 "are_members_which()".
256 • Determine in "which" (if any) of the lists passed as arguments one
258 or more given strings can be found. The lists beings searched are
259 placed in an array, a reference to which is the first argument
260 passed to "are_members_which()". The strings to be tested are also
261 placed in an array, a reference to which is the second argument
262 passed to that function.
263 $memb_hash_ref =
265 are_members_which( [ \@Llist, \@Rlist ] ,
266 [ qw| abel baker fargo hilton zebra | ]
267 );
268 or
270 $memb_hash_ref = are_members_which( {
272 lists => [ \@Llist, \@Rlist ], # value is arrayref
273 items => [ qw| abel baker fargo hilton zebra | ], # value is arrayref
274 } );
275 The return value is a reference to a hash of arrays. The key for
277 each element in this hash is the string being tested. Each
278 element's value is a reference to an anonymous array whose elements
279 are those indices in the constructor's argument list corresponding
280 to lists holding the strings being tested. In the examples above,
281 $memb_hash_ref will be:
282 {
284 abel => [ 0 ],
285 baker => [ 0, 1 ],
286 fargo => [ 0, 1 ],
287 hilton => [ 1 ],
288 zebra => [ ],
289 };
290 Note: "are_members_which()" can take more than one argument;
292 "is_member_which()" and "is_member_which_ref()" each take only one
293 argument. Unlike those functions, "are_members_which()" returns a
294 hash reference.
295 • Determine whether a given string can be found in any of the lists
297 passed as arguments. Return 1 if a specified string can be found
298 in any of the lists and 0 if not.
299 $found = is_member_any( [ \@Llist, \@Rlist ] , [ 'abel' ] );
301 or
303 $found = is_member_any( {
305 lists => [ \@Llist, \@Rlist ], # value is array reference
306 item => 'abel', # value is string
307 } );
308 In the example above, $found will be 1 because 'abel' is found in
310 one or more of the lists passed as arguments to "new()".
311 • Determine whether a specified string or strings can be found in any
313 of the lists passed as arguments. The lists beings searched are
314 placed in an array, a reference to which is the first argument
315 passed to "are_members_any()". The strings to be tested are also
316 placed in an array, a reference to which is the second argument
317 passed to that function.
318 $memb_hash_ref =
320 are_members_any( [ \@Llist, \@Rlist ] ,
321 [ qw| abel baker fargo hilton zebra | ]
322 );
323 or
325 $memb_hash_ref = are_members_any( {
327 lists => [ \@Llist, \@Rlist ], # value is arrayref
328 items => [ qw| abel baker fargo hilton zebra | ], # value is arrayref
329 } );
330 The return value is a reference to a hash where an element's key is
332 the string being tested and the element's value is 1 if the string
333 can be found in any of the lists and 0 if not. In the examples
334 above, $memb_hash_ref will be:
335 {
337 abel => 1,
338 baker => 1,
339 fargo => 1,
340 hilton => 1,
341 zebra => 0,
342 };
343 "zebra"'s value is 0 because "zebra" is not found in either of the
345 lists passed as arguments to "are_members_any()".
346 • Return current List::Compare::Functional version number.
348 $vers = get_version;
350 Comparing Three or More Lists Held in Arrays
352 Given five lists:
353 @Al = qw(abel abel baker camera delta edward fargo golfer);
355 @Bob = qw(baker camera delta delta edward fargo golfer hilton);
356 @Carmen = qw(fargo golfer hilton icon icon jerky kappa);
357 @Don = qw(fargo icon jerky);
358 @Ed = qw(fargo icon icon jerky);
359 • Get those items which appear at least once in each list (their
361 intersection).
362 @intersection = get_intersection( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
364 or
366 @intersection = get_intersection( {
368 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
369 } );
370 • Get those items which appear at least once in any of the lists
372 (their union).
373 @union = get_union( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
375 or
377 @union = get_union( {
378 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
379 } );
380 • To get those items which are unique to a particular list, provide
382 "get_unique()" with two array references. The first holds
383 references to the arrays which in turn hold the individual lists
384 being compared. The second holds the index position in the first
385 reference of the particular list under consideration. Example: To
386 get elements unique to @Carmen:
387 @Lonly = get_unique(
389 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
390 [ 2 ]
391 );
392 or
394 @Lonly = get_unique( {
396 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
397 item => 2, # value is number
398 } );
399 If no index position is passed to "get_unique()" it will default to
401 0 and report items unique to the first list passed to the function.
402 Hence,
403 @Lonly = get_unique( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
405 is same as:
407 @Lonly = get_unique( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], [ 0 ] );
409 • Should you need to identify the items unique to each of the lists
411 under consideration, call "get_unique_all" and get a reference to
412 an array of array references:
413 $unique_all_ref = get_unique_all(
415 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ]
416 );
417 or
419 $unique_all_ref = get_unique_all( {
421 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
422 } );
423 • To get those items which appear only in lists other than one
425 particular list, pass two array references to the
426 "get_complement()" function. The first holds references to the
427 arrays which in turn hold the individual lists being compared. The
428 second holds the index position in the first reference of the
429 particular list under consideration. Example: to get all the
430 elements found in lists other than @Don:
431 @Ronly = get_complement(
433 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
434 [ 3 ]
435 );
436 or
438 @Ronly = get_complement( {
440 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
441 item => 3, # value is number
442 } );
443 If no index position is passed to "get_complement()" it will
445 default to 0 and report items found in all lists other than the
446 first list passed to "get_complement()".
447 @Lonly = get_complement( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
449 is same as:
451 @Lonly = get_complement( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], [ 0 ] );
453 • Should you need to identify the items not found in each of the
455 lists under consideration, call "get_complement_all" and get a
456 reference to an array of array references:
457 $complement_all_ref = get_complement_all(
459 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ]
460 );
461 or
463 $complement_all_ref = get_complement_all( {
465 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
466 } );
467 • Get those items which do not appear in more than one of several
469 lists (their symmetric_difference);
470 @LorRonly = get_symmetric_difference( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
472 @LorRonly = get_symdiff( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] ); # alias
473 or
475 @LorRonly = get_symmetric_difference( {
477 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
478 } );
479 • Get those items found in any of several lists which do not appear
481 in "all" of the lists (i.e., all items except those found in the
482 intersection of the lists):
483 @nonintersection = get_nonintersection(
485 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
486 or
488 @nonintersection = get_nonintersection( {
490 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
491 } );
492 • Get those items which appear in more than one of several lists
494 (i.e., all items except those found in their symmetric difference);
495 @shared = get_shared( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
497 or
499 @shared = get_shared( {
501 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
502 } );
503 • Make a bag of every item found in every list. The bag differs from
505 the union of the two lists in that it holds as many copies of
506 individual elements as appear in the original lists.
507 @bag = get_bag( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
509 or
511 @bag = get_bag( {
513 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
514 } );
515 • An alternative approach to the above functions: If you do not
517 immediately require an array as the return value of the function,
518 but simply need a reference to an array, use one of the following
519 parallel functions:
520 $intersection_ref = get_intersection_ref(
522 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
523 $union_ref = get_union_ref(
524 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
525 $Lonly_ref = get_unique_ref(
526 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
527 $Ronly_ref = get_complement_ref(
528 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
529 $LorRonly_ref = get_symmetric_difference_ref(
530 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
531 $LorRonly_ref = get_symdiff_ref( # alias
532 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
533 $nonintersection_ref = get_nonintersection_ref(
534 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
535 $shared_ref = get_shared_ref(
536 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
537 $bag_ref = get_bag_ref(
538 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
539 • To determine whether one particular list is a subset of another of
541 the lists passed to the function, pass to "is_LsubsetR()" two array
542 references. The first of these is a reference to an array of array
543 references, the arrays holding the lists under consideration. The
544 second is a reference to a two-element array consisting of the
545 index of the presumed subset, followed by the index position of the
546 presumed superset. A true value (1) is returned if the first
547 (left-hand) element in the second reference list is a subset of the
548 second (right-hand) element; a false value (0) is returned
549 otherwise.
550 Example: To determine whether @Ed is a subset of @Carmen, call:
552 $LR = is_LsubsetR(
554 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
555 [ 4, 2 ]
556 );
557 or
559 $LR = is_LsubsetR( {
561 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
562 pair => [ 4, 2 ], # value is arrayref
563 } );
564 If only the first reference (to the array of lists) is passed to
566 "is_LsubsetR", then the function's second argument defaults to
567 "(0,1)" and compares the first two lists passed to the constructor.
568 So,
569 $LR = is_LsubsetR([ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
571 ... is equivalent to:
573 $LR = is_LsubsetR([ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], [0,1] );
575 • To reverse the order in which the particular lists are evaluated
577 for superset/subset status, call "is_RsubsetL":
578 $RL = is_RsubsetL([ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], [2,4] );
580 or
582 $RL = is_RsubsetL( {
584 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
585 pair => [ 2, 4 ],
586 } );
587 • List::Compare::Functional considers two lists to be equivalent if
589 every element in one list appears at least once in R and vice
590 versa. To determine whether one particular list passed to the
591 function is equivalent to another of the lists passed to the
592 function, provide "is_LequivalentR()" with two array references.
593 The first is a reference to an array of array references, the
594 arrays holding the lists under consideration. The second of these
595 is a reference to a two-element array consisting of the two lists
596 being tested for equivalence. A true value (1) is returned if the
597 lists are equivalent; a false value (0) is returned otherwise.
598 Example: To determine whether @Don and @Ed are equivalent, call:
600 $eqv = is_LequivalentR(
602 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
603 [3,4]
604 );
605 $eqv = is_LeqvlntR( # alias
607 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
608 [3,4]
609 );
610 or
612 $eqv = is_LequivalentR( {
614 items => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
615 pair => [3,4],
616 } );
617 If no arguments are passed, "is_LequivalentR" defaults to "[0,1]"
619 and compares the first two lists passed to the function. So,
620 $eqv = is_LequivalentR( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
622 ... translates to:
624 $eqv = is_LequivalentR( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], [0,1] );
626 • To determine whether any two of the lists passed to the function
628 are disjoint from one another (i.e., have no common members),
629 provide "is_LdisjointR()" with two array references. The first is
630 a reference to an array of array references, the arrays holding the
631 lists under consideration. The second of these is a reference to a
632 two-element array consisting of the two lists being tested for
633 disjointedness. A true value (1) is returned if the lists are
634 disjoint; a false value (0) is returned otherwise.
635 Example: To determine whether @Don and @Ed are disjoint, call:
637 $disj = is_LdisjointR(
639 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
640 [3,4]
641 );
642 or
644 $disj = is_LdisjointR( {
646 items => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
647 pair => [3,4]
648 } );
649 • Pretty-print a chart showing the subset relationships among the
651 various source lists:
652 print_subset_chart( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
654 or
656 print_subset_chart( { lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] } );
658 • Pretty-print a chart showing the equivalence relationships among
660 the various source lists:
661 print_equivalence_chart( [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] );
663 or
665 print_equivalence_chart( { lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ] } );
667 • Determine in which (if any) of several lists a given string can be
669 found. Pass two array references, the first of which holds
670 references to arrays holding the lists under consideration, and the
671 second of which holds a single-item list consisting of the string
672 being tested.
673 @memb_arr = is_member_which(
675 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
676 [ 'abel' ]
677 );
678 or
680 @memb_arr = is_member_which( {
682 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
683 item => 'abel', # value is string
684 } );
685 In list context, return a list of those indices in the function's
687 argument list corresponding to lists holding the string being
688 tested. In the example above, @memb_arr will be:
689 ( 0 )
691 because 'abel' is found only in @Al which holds position 0 in the
693 list of arguments passed to "is_member_which()".
694 • As with other List::Compare::Functional functions which return a
696 list, you may wish the above function returned a reference to an
697 array holding the list:
698 $memb_arr_ref = is_member_which_ref(
700 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
701 [ 'jerky' ]
702 );
703 or
705 $memb_arr_ref = is_member_which_ref( {
707 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
708 item => 'jerky', # value is string
709 } );
710 In the example above, $memb_arr_ref will be:
712 [ 3, 4 ]
714 because 'jerky' is found in @Don and @Ed, which hold positions 3
716 and 4, respectively, in the list of arguments passed to
717 "is_member_which()".
718 Note: functions "is_member_which()" and "is_member_which_ref" test
720 only one string at a time and hence take only one element in the
721 second array reference argument. To test more than one string at a
722 time see the next function, "are_members_which()".
723 • Determine in "which" (if any) of several lists one or more given
725 strings can be found. Pass two array references, the first of
726 which holds references to arrays holding the lists under
727 consideration, and the second of which holds a list of the strings
728 being tested.
729 $memb_hash_ref = are_members_which(
731 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
732 [ qw| abel baker fargo hilton zebra | ]
733 );
734 or
736 $memb_hash_ref = are_members_which( {
738 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
739 items => [ qw| abel baker fargo hilton zebra | ], # value is arrayref
740 } );
741 The return valus is a reference to a hash of arrays. In this hash,
743 each element's value is a reference to an anonymous array whose
744 elements are those indices in the argument list corresponding to
745 lists holding the strings being tested. In the two examples above,
746 $memb_hash_ref will be:
747 {
749 abel => [ 0 ],
750 baker => [ 0, 1 ],
751 fargo => [ 0, 1, 2, 3, 4 ],
752 hilton => [ 1, 2 ],
753 zebra => [ ],
754 };
755 Note: "are_members_which()" tests more than one string at a time.
757 Hence, its second array reference argument can take more than one
758 element. "is_member_which()" and "is_member_which_ref()" each take
759 only one element in their second array reference arguments.
760 "are_members_which()" returns a hash reference; the other functions
761 return either a list or a reference to an array holding that list,
762 depending on context.
763 • Determine whether a given string can be found in any of several
765 lists. Pass two array references, the first of which holds
766 references to arrays holding the lists under consideration, and the
767 second of which holds a single-item list of the string being
768 tested.
769 $found = is_member_any(
771 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
772 [ 'abel' ]
773 );
774 or
776 $found = is_member_any( {
778 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
779 item => 'abel', # value is string
780 } );
781 The return value is 1 if a specified string can be found in any of
783 the lists and 0 if not. In the example above, $found will be 1
784 because "abel" is found in one or more of the lists passed as
785 arguments to "is_member_any()".
786 • Determine whether a specified string or strings can be found in any
788 of several lists. Pass two array references, the first of which
789 holds references to arrays holding the lists under consideration,
790 and the second of which holds a list of the strings being tested.
791 $memb_hash_ref = are_members_any(
793 [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ],
794 [ qw| abel baker fargo hilton zebra | ]
795 );
796 or
798 $memb_hash_ref = are_members_any( {
800 lists => [ \@Al, \@Bob, \@Carmen, \@Don, \@Ed ], # value is arrayref
801 items => [ qw| abel baker fargo hilton zebra | ], # value is arrayref
802 } );
803 The return value is a reference to a hash where an element's key is
805 the string being tested and the element's value is 1 if the string
806 can be found in any of the lists and 0 if not. In the example
807 above, $memb_hash_ref will be:
808 {
810 abel => 1,
811 baker => 1,
812 fargo => 1,
813 hilton => 1,
814 zebra => 0,
815 };
816 "zebra"'s value is 0 because "zebra" is not found in any of the
818 lists passed as arguments to "are_members_any()".
819 • Return current List::Compare::Functional version number:
821 $vers = get_version;
823 Comparing Lists Held in Seen-Hashes
825 What is a seen-hash? A seen-hash is a typical Perl implementation of a
826 look-up table: a hash where the value for a given element represents
827 the number of times the element's key is observed in a list. For the
828 purposes of List::Compare::Functional, what is crucial is whether an
829 item is observed in a list or not; how many times the item occurs in a
830 list is, with one exception, irrelevant. (That exception is the
831 "get_bag()" function and its fraternal twin "get_bag_ref()". In this
832 case only, the key in each element of the seen-hash is placed in the
833 bag the number of times indicated by the value of that element.) The
834 value of an element in a List::Compare seen-hash must be a positive
835 integer, but whether that integer is 1 or 1,000,001 is immaterial for
836 all List::Compare::Functional functions except forming a bag.
837 The two lists compared above were represented by arrays; references to
839 those arrays were passed to the various List::Compare::Functional
840 functions. They could, however, have been represented by seen-hashes
841 such as the following and passed in exactly the same manner to the
842 various functions.
843 %Llist = (
845 abel => 2,
846 baker => 1,
847 camera => 1,
848 delta => 1,
849 edward => 1,
850 fargo => 1,
851 golfer => 1,
852 );
853 %Rlist = (
854 baker => 1,
855 camera => 1,
856 delta => 2,
857 edward => 1,
858 fargo => 1,
859 golfer => 1,
860 hilton => 1,
861 );
862 @intersection = get_intersection( [ \%Llist, \%Rlist ] );
864 @union = get_union( [ \%Llist, \%Rlist ] );
865 @complement = get_complement( [ \%Llist, \%Rlist ] );
866 and so forth.
868 To compare three or more lists simultaneously, provide the appropriate
870 List::Compare::Functional function with a first array reference holding
871 a list of three or more references to seen-hashes. Thus,
872 @union = get_intersection( [ \%Alpha, \%Beta, \%Gamma ] );
874 The 'single hashref' format for List::Compare::Functional functions is
876 also available when passing seen-hashes as arguments. Examples:
877 @intersection = get_intersection( {
879 lists => [ \%Alpha, \%Beta, \%Gamma ],
880 } );
881 @Ronly = get_complement( {
883 lists => [ \%Alpha, \%Beta, \%Gamma ],
884 item => 3,
885 } );
886 $LR = is_LsubsetR( {
888 lists => [ \%Alpha, \%Beta, \%Gamma ],
889 pair => [ 4, 2 ],
890 } );
891 $memb_hash_ref = are_members_any( {
893 lists => [ \%Alpha, \%Beta, \%Gamma ],
894 items => [ qw| abel baker fargo hilton zebra | ],
895 } );
896 Faster Results with the Unsorted Option
898 By default, List::Compare::Function functions return lists sorted in
899 Perl's default ASCII-betical mode. Sorting entails a performance cost,
900 and if you do not need a sorted list and do not wish to pay this
901 performance cost, you may call the following List::Compare::Function
902 functions with the 'unsorted' option:
903 @intersection = get_intersection( '-u', [ \@Llist, \@Rlist ] );
905 @union = get_union( '-u', [ \@Llist, \@Rlist ] );
906 @Lonly = get_unique( '-u', [ \@Llist, \@Rlist ] );
907 @Ronly = get_complement( '-u', [ \@Llist, \@Rlist ] );
908 @LorRonly = get_symmetric_difference('-u', [ \@Llist, \@Rlist ] );
909 @bag = get_bag( '-u', [ \@Llist, \@Rlist ] );
910 For greater readability, the option may be spelled out:
912 @intersection = get_intersection('--unsorted', [ \@Llist, \@Rlist ] );
914 or
916 @intersection = get_intersection( {
918 unsorted => 1,
919 lists => [ \@Llist, \@Rlist ],
920 } );
921 Should you need a reference to an unsorted list as the return value,
923 you may call the unsorted option as follows:
924 $intersection_ref = get_intersection_ref(
926 '-u', [ \@Llist, \@Rlist ] );
927 $intersection_ref = get_intersection_ref(
928 '--unsorted', [ \@Llist, \@Rlist ] );
929
931 General Comments
932 List::Compare::Functional is a non-object-oriented implementation of
933 very common Perl code used to determine interesting relationships
934 between two or more lists at a time. List::Compare::Functional is
935 based on the same author's List::Compare module found in the same CPAN
936 distribution. List::Compare::Functional is closely modeled on the
937 ''Accelerated'' mode in List::Compare.
938 For a discussion of the antecedents of this module, see the discussion
940 of the history and development of this module in the documentation to
941 List::Compare.
942 List::Compare::Functional's Export Tag Groups
944 By default, List::Compare::Functional exports no functions. You may
945 import individual functions into your main package but may find it more
946 convenient to import via export tag groups. Four such groups are
947 currently defined:
948 use List::Compare::Functional qw(:main)
950 use List::Compare::Functional qw(:mainrefs)
951 use List::Compare::Functional qw(:originals)
952 use List::Compare::Functional qw(:aliases)
953 • Tag group ":main" includes what, in the author's opinion, are the
955 six List::Compare::Functional subroutines mostly likely to be used:
956 get_intersection()
958 get_union()
959 get_unique()
960 get_complement()
961 get_symmetric_difference()
962 is_LsubsetR()
963 • Tag group ":mainrefs" includes five of the six subroutines found in
965 ":main" -- all except "is_LsubsetR()" -- in the form in which they
966 return references to arrays rather than arrays proper:
967 get_intersection_ref()
969 get_union_ref()
970 get_unique_ref()
971 get_complement_ref()
972 get_symmetric_difference_ref()
973 • Tag group ":originals" includes all List::Compare::Functional
975 subroutines in their 'original' form, i.e., no aliases for those
976 subroutines:
977 get_intersection
979 get_intersection_ref
980 get_union
981 get_union_ref
982 get_unique
983 get_unique_ref
984 get_unique_all
985 get_complement
986 get_complement_ref
987 get_complement_all
988 get_symmetric_difference
989 get_symmetric_difference_ref
990 get_shared
991 get_shared_ref
992 get_nonintersection
993 get_nonintersection_ref
994 is_LsubsetR
995 is_RsubsetL
996 is_LequivalentR
997 is_LdisjointR
998 is_member_which
999 is_member_which_ref
1000 are_members_which
1001 is_member_any
1002 are_members_any
1003 print_subset_chart
1004 print_equivalence_chart
1005 get_bag
1006 get_bag_ref
1007 • Tag group ":aliases" contains all List::Compare::Functional
1009 subroutines which are aliases for subroutines found in tag group
1010 ":originals". These are provided simply for less typing.
1011 get_symdiff
1013 get_symdiff_ref
1014 is_LeqvlntR
1015 April 2004 Change of Interface
1017 Note: You can skip this section unless you used
1018 List::Compare::Functional prior to the release of Version 0.25 in April
1019 2004.
1020 Version 0.25 initiated a significant change in the interface to this
1022 module's various functions. In order to be able to accommodate
1023 comparisons among more than two lists, it was necessary to change the
1024 type of arguments passed to the various functions. Whereas previously
1025 a typical List::Compare::Functional function would be called like this:
1026 @intersection = get_intersection( \@Llist, \@Rlist ); # SUPERSEDED
1028 ... now the references to the lists being compared must now be placed
1030 within a wrapper array (anonymous or named), a reference to which is
1031 now passed to the function, like so:
1032 @intersection = get_intersection( [ \@Llist, \@Rlist ] );
1034 ... or, alternatively:
1036 @to_be_compared = (\@Llist, \@Rlist);
1038 @intersection = get_intersection( \@to_be_compared );
1039 In a similar manner, List::Compare::Functional functions could
1041 previously take arguments in the form of references to 'seen-hashes'
1042 instead of references to arrays:
1043 @intersection = get_intersection( \%h0, \%h1 );
1045 (See above for discussion of seen-hashes.) Now, those references to
1047 seen-hashes must be placed within a wrapper array (anonymous or named),
1048 a reference to which is passed to the function, like so:
1049 @intersection = get_intersection( [ \%h0, \%h1 ] );
1051 Also, in a similar manner, some List::Compare::Functional functions
1053 previously took arguments in addition to the lists being compared.
1054 These arguments were simply passed as scalars, like this:
1055 @memb_arr = is_member_which(\@Llist, \@Rlist, 'abel');
1057 Now these arguments must also be placed within a wrapper array
1059 (anonymous or named), a reference to which is now passed to the
1060 function, like so:
1061 @memb_arr = is_member_which( [ \@Llist, \@Rlist ], [ 'abel' ] );
1063 ... or, alternatively:
1065 @to_be_compared = (\@Llist, \@Rlist);
1067 @opts = ( 'abel' );
1068 @memb_arr = is_member_which( \@to_be_compared, \@opts );
1069 As in previous versions, for a speed boost the user may provide the
1071 '-u' or '--unsorted' option as the first argument to some
1072 List::Compare::Functional functions. Using this option, the
1073 "get_intersection()" function above would appear as:
1074 @intersection = get_intersection( '-u', [ \@Llist, \@Rlist ] );
1076 ... or, alternatively:
1078 @intersection = get_intersection( '--unsorted', [ \@Llist, \@Rlist ] );
1080 The arguments to any List::Compare::Functional function will therefore
1082 consist possibly of the unsorted option, and then of either one or two
1083 references to arrays, the first of which is a reference to an array of
1084 arrays or an array of seen-hashes.
1085
1087 James E. Keenan (jkeenan@cpan.org). When sending correspondence,
1088 please include 'List::Compare::Functional' or 'List-Compare-Functional'
1089 in your subject line.
1090 Creation date: May 20, 2002. Last modification date: August 16 2020.
1092 Copyright (c) 2002-20 James E. Keenan. United States. All rights
1093 reserved. This is free software and may be distributed under the same
1094 terms as Perl itself.
1095perl v5.32.1 2021-01-27 List::Compare::Functional(3)