dirsrvadmin_selinux(8)

1dirsrvadmin_selinux(8)    SELinux Policy dirsrvadmin    dirsrvadmin_selinux(8)
2
3
4

NAME

6       dirsrvadmin_selinux  - Security Enhanced Linux Policy for the dirsrvad‐
7       min processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the dirsrvadmin processes via  flexible
11       mandatory access control.
12
13       The  dirsrvadmin processes execute with the dirsrvadmin_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep dirsrvadmin_t
20
21
22

ENTRYPOINTS

24       The  dirsrvadmin_t  SELinux  type  can  be  entered  via  the dirsrvad‐
25       min_exec_t, shell_exec_t file types.
26
27       The default entrypoint paths for the dirsrvadmin_t domain are the  fol‐
28       lowing:
29
30       /usr/sbin/stop-ds-admin,  /usr/sbin/start-ds-admin,  /usr/sbin/restart-
31       ds-admin,   /bin/d?ash,   /bin/ksh.*,    /bin/zsh.*,    /usr/bin/d?ash,
32       /usr/bin/ksh.*,   /usr/bin/zsh.*,   /bin/esh,   /bin/bash,   /bin/fish,
33       /bin/mksh, /bin/sash, /bin/tcsh, /bin/yash,  /bin/bash2,  /usr/bin/esh,
34       /sbin/nologin,     /usr/bin/bash,     /usr/bin/fish,     /usr/bin/mksh,
35       /usr/bin/sash,    /usr/bin/tcsh,     /usr/bin/yash,     /usr/bin/bash2,
36       /usr/sbin/sesh,  /usr/sbin/smrsh,  /usr/bin/scponly, /usr/libexec/sesh,
37       /usr/sbin/nologin,       /usr/bin/git-shell,        /usr/sbin/scponlyc,
38       /usr/libexec/sudo/sesh,  /usr/bin/cockpit-bridge, /usr/libexec/cockpit-
39       agent, /usr/libexec/git-core/git-shell
40

PROCESS TYPES

42       SELinux defines process types (domains) for each process running on the
43       system
44
45       You can see the context of a process using the -Z option to ps
46
47       Policy  governs  the  access confined processes have to files.  SELinux
48       dirsrvadmin policy is very  flexible  allowing  users  to  setup  their
49       dirsrvadmin processes in as secure a method as possible.
50
51       The following process types are defined for dirsrvadmin:
52
53       dirsrvadmin_t, dirsrvadmin_unconfined_script_t, dirsrvadmin_script_t
54
55       Note:  semanage  permissive  -a  dirsrvadmin_t  can be used to make the
56       process type dirsrvadmin_t permissive. SELinux does not deny access  to
57       permissive  process  types,  but the AVC (SELinux denials) messages are
58       still generated.
59
60

BOOLEANS

62       SELinux policy is customizable based on least access required.   dirsr‐
63       vadmin policy is extremely flexible and has several booleans that allow
64       you to manipulate the policy and run dirsrvadmin with the tightest  ac‐
65       cess possible.
66
67
68
69       If you want to allow all domains to execute in fips_mode, you must turn
70       on the fips_mode boolean. Enabled by default.
71
72       setsebool -P fips_mode 1
73
74
75

MANAGED FILES

77       The SELinux process type dirsrvadmin_t can manage  files  labeled  with
78       the  following  file types.  The paths listed are the default paths for
79       these file types.  Note the processes UID still need to have  DAC  per‐
80       missions.
81
82       cluster_conf_t
83
84            /etc/cluster(/.*)?
85
86       cluster_var_lib_t
87
88            /var/lib/pcsd(/.*)?
89            /var/lib/cluster(/.*)?
90            /var/lib/openais(/.*)?
91            /var/lib/pengine(/.*)?
92            /var/lib/corosync(/.*)?
93            /usr/lib/heartbeat(/.*)?
94            /var/lib/heartbeat(/.*)?
95            /var/lib/pacemaker(/.*)?
96
97       cluster_var_run_t
98
99            /var/run/crm(/.*)?
100            /var/run/cman_.*
101            /var/run/rsctmp(/.*)?
102            /var/run/aisexec.*
103            /var/run/heartbeat(/.*)?
104            /var/run/pcsd-ruby.socket
105            /var/run/corosync-qnetd(/.*)?
106            /var/run/corosync-qdevice(/.*)?
107            /var/run/corosync.pid
108            /var/run/cpglockd.pid
109            /var/run/rgmanager.pid
110            /var/run/cluster/rgmanager.sk
111
112       dirsrvadmin_tmp_t
113
114
115       root_t
116
117            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
118            /
119            /initrd
120
121

FILE CONTEXTS

123       SELinux requires files to have an extended attribute to define the file
124       type.
125
126       You can see the context of a file using the -Z option to ls
127
128       Policy governs the access  confined  processes  have  to  these  files.
129       SELinux  dirsrvadmin  policy  is  very flexible allowing users to setup
130       their dirsrvadmin processes in as secure a method as possible.
131
132       STANDARD FILE CONTEXT
133
134       SELinux defines the file context types  for  the  dirsrvadmin,  if  you
135       wanted  to store files with these types in a diffent paths, you need to
136       execute the semanage command to sepecify alternate  labeling  and  then
137       use restorecon to put the labels on disk.
138
139       semanage  fcontext  -a  -t  dirsrvadmin_ra_content_t  '/srv/mydirsrvad‐
140       min_content(/.*)?'
141       restorecon -R -v /srv/mydirsrvadmin_content
142
143       Note: SELinux often uses regular expressions  to  specify  labels  that
144       match multiple files.
145
146       The following file types are defined for dirsrvadmin:
147
148
149
150       dirsrvadmin_config_t
151
152       -  Set  files  with the dirsrvadmin_config_t type, if you want to treat
153       the files as dirsrvadmin configuration data, usually stored  under  the
154       /etc directory.
155
156
157       Paths:
158            /etc/dirsrv/dsgw(/.*)?, /etc/dirsrv/admin-serv(/.*)?
159
160
161       dirsrvadmin_content_t
162
163       -  Set  files with the dirsrvadmin_content_t type, if you want to treat
164       the files as dirsrvadmin content.
165
166
167
168       dirsrvadmin_exec_t
169
170       - Set files with the dirsrvadmin_exec_t type, if you want to transition
171       an executable to the dirsrvadmin_t domain.
172
173
174       Paths:
175            /usr/sbin/stop-ds-admin,                 /usr/sbin/start-ds-admin,
176            /usr/sbin/restart-ds-admin
177
178
179       dirsrvadmin_htaccess_t
180
181       - Set files with the dirsrvadmin_htaccess_t type, if you want to  treat
182       the file as a dirsrvadmin access file.
183
184
185
186       dirsrvadmin_lock_t
187
188       -  Set files with the dirsrvadmin_lock_t type, if you want to treat the
189       files as dirsrvadmin lock data, stored under the /var/lock directory
190
191
192
193       dirsrvadmin_ra_content_t
194
195       - Set files with the dirsrvadmin_ra_content_t  type,  if  you  want  to
196       treat the files as dirsrvadmin read/append content.
197
198
199
200       dirsrvadmin_rw_content_t
201
202       -  Set  files  with  the  dirsrvadmin_rw_content_t type, if you want to
203       treat the files as dirsrvadmin read/write content.
204
205
206
207       dirsrvadmin_script_exec_t
208
209       - Set files with the dirsrvadmin_script_exec_t type,  if  you  want  to
210       transition an executable to the dirsrvadmin_script_t domain.
211
212
213       Paths:
214            /usr/lib/dirsrv/cgi-bin(/.*)?, /usr/lib/dirsrv/dsgw-cgi-bin(/.*)?
215
216
217       dirsrvadmin_tmp_t
218
219       -  Set  files  with  the  dirsrvadmin_tmp_t  type, if you want to store
220       dirsrvadmin temporary files in the /tmp directories.
221
222
223
224       dirsrvadmin_unconfined_script_exec_t
225
226       - Set files with the dirsrvadmin_unconfined_script_exec_t type, if  you
227       want to transition an executable to the dirsrvadmin_unconfined_script_t
228       domain.
229
230
231       Paths:
232            /usr/lib/dirsrv/cgi-bin/ds_create,  /usr/lib/dirsrv/cgi-bin/ds_re‐
233            move
234
235
236       dirsrvadmin_unit_file_t
237
238       - Set files with the dirsrvadmin_unit_file_t type, if you want to treat
239       the files as dirsrvadmin unit content.
240
241
242
243       Note: File context can be temporarily modified with the chcon  command.
244       If  you want to permanently change the file context you need to use the
245       semanage fcontext command.  This will modify the SELinux labeling data‐
246       base.  You will need to use restorecon to apply the labels.
247
248

COMMANDS

250       semanage  fcontext  can also be used to manipulate default file context
251       mappings.
252
253       semanage permissive can also be used to manipulate  whether  or  not  a
254       process type is permissive.
255
256       semanage  module can also be used to enable/disable/install/remove pol‐
257       icy modules.
258
259       semanage boolean can also be used to manipulate the booleans
260
261
262       system-config-selinux is a GUI tool available to customize SELinux pol‐
263       icy settings.
264
265

AUTHOR

267       This manual page was auto-generated using sepolicy manpage .
268
269