1mcelog_selinux(8) SELinux Policy mcelog mcelog_selinux(8)
2
6 mcelog_selinux - Security Enhanced Linux Policy for the mcelog pro‐
7 cesses
8
10 Security-Enhanced Linux secures the mcelog processes via flexible
11 mandatory access control.
12 The mcelog processes execute with the mcelog_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep mcelog_t
20
24 The mcelog_t SELinux type can be entered via the mcelog_exec_t file
25 type.
26 The default entrypoint paths for the mcelog_t domain are the following:
28 /usr/sbin/mcelog
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 mcelog policy is very flexible allowing users to setup their mcelog
39 processes in as secure a method as possible.
40 The following process types are defined for mcelog:
42 mcelog_t
44 Note: semanage permissive -a mcelog_t can be used to make the process
46 type mcelog_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. mcelog
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run mcelog with the tightest access possible.
55 If you want to determine whether mcelog supports client mode, you must
59 turn on the mcelog_client boolean. Disabled by default.
60 setsebool -P mcelog_client 1
62 If you want to determine whether mcelog can use all the user ttys, you
66 must turn on the mcelog_foreground boolean. Disabled by default.
67 setsebool -P mcelog_foreground 1
69 If you want to allow all domains to execute in fips_mode, you must turn
73 on the fips_mode boolean. Enabled by default.
74 setsebool -P fips_mode 1
76 If you want to allow system to run with NIS, you must turn on the
80 nis_enabled boolean. Disabled by default.
81 setsebool -P nis_enabled 1
83
87 The SELinux process type mcelog_t can manage files labeled with the
88 following file types. The paths listed are the default paths for these
89 file types. Note the processes UID still need to have DAC permissions.
90 cluster_conf_t
92 /etc/cluster(/.*)?
94 cluster_var_lib_t
96 /var/lib/pcsd(/.*)?
98 /var/lib/cluster(/.*)?
99 /var/lib/openais(/.*)?
100 /var/lib/pengine(/.*)?
101 /var/lib/corosync(/.*)?
102 /usr/lib/heartbeat(/.*)?
103 /var/lib/heartbeat(/.*)?
104 /var/lib/pacemaker(/.*)?
105 cluster_var_run_t
107 /var/run/crm(/.*)?
109 /var/run/cman_.*
110 /var/run/rsctmp(/.*)?
111 /var/run/aisexec.*
112 /var/run/heartbeat(/.*)?
113 /var/run/pcsd-ruby.socket
114 /var/run/corosync-qnetd(/.*)?
115 /var/run/corosync-qdevice(/.*)?
116 /var/run/corosync.pid
117 /var/run/cpglockd.pid
118 /var/run/rgmanager.pid
119 /var/run/cluster/rgmanager.sk
120 krb5_host_rcache_t
122 /var/tmp/krb5_0.rcache2
124 /var/cache/krb5rcache(/.*)?
125 /var/tmp/nfs_0
126 /var/tmp/DNS_25
127 /var/tmp/host_0
128 /var/tmp/imap_0
129 /var/tmp/HTTP_23
130 /var/tmp/HTTP_48
131 /var/tmp/ldap_55
132 /var/tmp/ldap_487
133 /var/tmp/ldapmap1_0
134 mcelog_var_run_t
136 /var/run/mcelog.*
138 root_t
140 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
142 /
143 /initrd
144 sysfs_t
146 /sys(/.*)?
148
151 SELinux requires files to have an extended attribute to define the file
152 type.
153 You can see the context of a file using the -Z option to ls
155 Policy governs the access confined processes have to these files.
157 SELinux mcelog policy is very flexible allowing users to setup their
158 mcelog processes in as secure a method as possible.
159 STANDARD FILE CONTEXT
161 SELinux defines the file context types for the mcelog, if you wanted to
163 store files with these types in a diffent paths, you need to execute
164 the semanage command to sepecify alternate labeling and then use re‐
165 storecon to put the labels on disk.
166 semanage fcontext -a -t mcelog_var_run_t '/srv/mymcelog_content(/.*)?'
168 restorecon -R -v /srv/mymcelog_content
169 Note: SELinux often uses regular expressions to specify labels that
171 match multiple files.
172 The following file types are defined for mcelog:
174 mcelog_etc_t
178 - Set files with the mcelog_etc_t type, if you want to store mcelog
180 files in the /etc directories.
181 mcelog_exec_t
185 - Set files with the mcelog_exec_t type, if you want to transition an
187 executable to the mcelog_t domain.
188 mcelog_initrc_exec_t
192 - Set files with the mcelog_initrc_exec_t type, if you want to transi‐
194 tion an executable to the mcelog_initrc_t domain.
195 mcelog_log_t
199 - Set files with the mcelog_log_t type, if you want to treat the data
201 as mcelog log data, usually stored under the /var/log directory.
202 mcelog_var_run_t
206 - Set files with the mcelog_var_run_t type, if you want to store the
208 mcelog files under the /run or /var/run directory.
209 Note: File context can be temporarily modified with the chcon command.
213 If you want to permanently change the file context you need to use the
214 semanage fcontext command. This will modify the SELinux labeling data‐
215 base. You will need to use restorecon to apply the labels.
216
219 semanage fcontext can also be used to manipulate default file context
220 mappings.
221 semanage permissive can also be used to manipulate whether or not a
223 process type is permissive.
224 semanage module can also be used to enable/disable/install/remove pol‐
226 icy modules.
227 semanage boolean can also be used to manipulate the booleans
229 system-config-selinux is a GUI tool available to customize SELinux pol‐
232 icy settings.
233
236 This manual page was auto-generated using sepolicy manpage .
237
240 selinux(8), mcelog(8), semanage(8), restorecon(8), chcon(1), sepol‐
241 icy(8), setsebool(8)
242mcelog 21-06-09 mcelog_selinux(8)