1UBERTOOTH-SPECAN(1)              User Commands             UBERTOOTH-SPECAN(1)
2
3
4

NAME

6       ubertooth-specan(1) - a spectrum analyzer for Ubertooth
7
8

SYNOPSIS

10       ubertooth-specan [-l <freq>] [-u <freq>] [-g|G]
11
12

DESCRIPTION

14       ubertooth-specan(1)  is  a  tool for using Ubertooth as a spectrum ana‐
15       lyzer in the 2.4GHz band. It is often used as a helper for  GUI  tools,
16       such  as  ubertooth-specan-ui  or Spectools. It can also produce output
17       suitable for user with the feedgnuplot tool.
18
19
20       Other options allow upper and lower bounds to be set on the frequencies
21       monitored. Refer to the [OPTIONS][] section for full details.
22
23

OPTIONS

25       Options:
26
27       · -l : lower frequency (default 2402)
28
29       · -u : upper frequency (default 2480)
30
31       · -g : format output for feedgnuplot
32
33       · -G : format output for 3D feedgnuplot
34
35       · -d<filename> : output to file <filename>
36
37       · -v : print verbose output to stderr
38
39       · -U<0-7> : set ubertooth device to use
40
41
42       ##EXAMPLES
43
44
45       To monitor the 2.4GHz band and produce a file suitable for feedgnuplot:
46
47
48       ubertooth-specan -g -d output.dat
49
50
51       To monitor the upper half of the 2.4GHz band, use:
52
53
54       ubertooth-specan -l 2440
55
56

SEE ALSO

58       ubertooth(7): overview of Project Ubertooth
59
60

AUTHOR

62       This manual page was written by Dominic Spill.
63
64

66       ubertooth-specan(1)  is  Copyright (c) 2010-2017. This tool is released
67       under the GPLv2. Refer to COPYING for further details.
68
69
70
71Project Ubertooth                 March 2017               UBERTOOTH-SPECAN(1)
Impressum