couchdb_selinux(8)

1couchdb_selinux(8)          SELinux Policy couchdb          couchdb_selinux(8)
2
3
4

NAME

6       couchdb_selinux  -  Security Enhanced Linux Policy for the couchdb pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  couchdb  processes  via  flexible
11       mandatory access control.
12
13       The  couchdb processes execute with the couchdb_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep couchdb_t
20
21
22

ENTRYPOINTS

24       The  couchdb_t  SELinux type can be entered via the couchdb_exec_t file
25       type.
26
27       The default entrypoint paths for the couchdb_t domain are  the  follow‐
28       ing:
29
30       /usr/libexec/couchdb
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       couchdb  policy  is very flexible allowing users to setup their couchdb
40       processes in as secure a method as possible.
41
42       The following process types are defined for couchdb:
43
44       couchdb_t
45
46       Note: semanage permissive -a couchdb_t can be used to make the  process
47       type  couchdb_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  couchdb
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run couchdb with the tightest access possi‐
56       ble.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

PORT TYPES

68       SELinux defines port types to represent TCP and UDP ports.
69
70       You  can  see  the  types associated with a port by using the following
71       command:
72
73       semanage port -l
74
75
76       Policy governs the access  confined  processes  have  to  these  ports.
77       SELinux  couchdb  policy is very flexible allowing users to setup their
78       couchdb processes in as secure a method as possible.
79
80       The following port types are defined for couchdb:
81
82
83       couchdb_port_t
84
85
86
87       Default Defined Ports:
88                 tcp 5984,6984
89                 udp 5984,6984
90

MANAGED FILES

92       The SELinux process type couchdb_t can manage files  labeled  with  the
93       following file types.  The paths listed are the default paths for these
94       file types.  Note the processes UID still need to have DAC permissions.
95
96       cluster_conf_t
97
98            /etc/cluster(/.*)?
99
100       cluster_var_lib_t
101
102            /var/lib/pcsd(/.*)?
103            /var/lib/cluster(/.*)?
104            /var/lib/openais(/.*)?
105            /var/lib/pengine(/.*)?
106            /var/lib/corosync(/.*)?
107            /usr/lib/heartbeat(/.*)?
108            /var/lib/heartbeat(/.*)?
109            /var/lib/pacemaker(/.*)?
110
111       cluster_var_run_t
112
113            /var/run/crm(/.*)?
114            /var/run/cman_.*
115            /var/run/rsctmp(/.*)?
116            /var/run/aisexec.*
117            /var/run/heartbeat(/.*)?
118            /var/run/pcsd-ruby.socket
119            /var/run/corosync-qnetd(/.*)?
120            /var/run/corosync-qdevice(/.*)?
121            /var/run/corosync.pid
122            /var/run/cpglockd.pid
123            /var/run/rgmanager.pid
124            /var/run/cluster/rgmanager.sk
125
126       couchdb_conf_t
127
128            /etc/couchdb(/.*)?
129
130       couchdb_tmp_t
131
132
133       couchdb_var_lib_t
134
135            /var/lib/couchdb(/.*)?
136
137       couchdb_var_run_t
138
139            /var/run/couchdb(/.*)?
140
141       krb5_host_rcache_t
142
143            /var/tmp/krb5_0.rcache2
144            /var/cache/krb5rcache(/.*)?
145            /var/tmp/nfs_0
146            /var/tmp/DNS_25
147            /var/tmp/host_0
148            /var/tmp/imap_0
149            /var/tmp/HTTP_23
150            /var/tmp/HTTP_48
151            /var/tmp/ldap_55
152            /var/tmp/ldap_487
153            /var/tmp/ldapmap1_0
154
155       root_t
156
157            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
158            /
159            /initrd
160
161

FILE CONTEXTS

163       SELinux requires files to have an extended attribute to define the file
164       type.
165
166       You can see the context of a file using the -Z option to ls
167
168       Policy  governs  the  access  confined  processes  have to these files.
169       SELinux couchdb policy is very flexible allowing users to  setup  their
170       couchdb processes in as secure a method as possible.
171
172       STANDARD FILE CONTEXT
173
174       SELinux  defines  the file context types for the couchdb, if you wanted
175       to store files with these types in a diffent paths, you need to execute
176       the  semanage  command  to  specify alternate labeling and then use re‐
177       storecon to put the labels on disk.
178
179       semanage  fcontext  -a  -t   couchdb_unit_file_t   '/srv/mycouchdb_con‐
180       tent(/.*)?'
181       restorecon -R -v /srv/mycouchdb_content
182
183       Note:  SELinux  often  uses  regular expressions to specify labels that
184       match multiple files.
185
186       The following file types are defined for couchdb:
187
188
189
190       couchdb_conf_t
191
192       - Set files with the couchdb_conf_t type, if  you  want  to  treat  the
193       files  as couchdb configuration data, usually stored under the /etc di‐
194       rectory.
195
196
197
198       couchdb_exec_t
199
200       - Set files with the couchdb_exec_t type, if you want to transition  an
201       executable to the couchdb_t domain.
202
203
204
205       couchdb_initrc_exec_t
206
207       - Set files with the couchdb_initrc_exec_t type, if you want to transi‐
208       tion an executable to the couchdb_initrc_t domain.
209
210
211
212       couchdb_log_t
213
214       - Set files with the couchdb_log_t type, if you want to treat the  data
215       as couchdb log data, usually stored under the /var/log directory.
216
217
218
219       couchdb_tmp_t
220
221       -  Set  files with the couchdb_tmp_t type, if you want to store couchdb
222       temporary files in the /tmp directories.
223
224
225
226       couchdb_unit_file_t
227
228       - Set files with the couchdb_unit_file_t type, if you want to treat the
229       files as couchdb unit content.
230
231
232
233       couchdb_var_lib_t
234
235       -  Set  files with the couchdb_var_lib_t type, if you want to store the
236       couchdb files under the /var/lib directory.
237
238
239
240       couchdb_var_run_t
241
242       - Set files with the couchdb_var_run_t type, if you want to  store  the
243       couchdb files under the /run or /var/run directory.
244
245
246
247       Note:  File context can be temporarily modified with the chcon command.
248       If you want to permanently change the file context you need to use  the
249       semanage fcontext command.  This will modify the SELinux labeling data‐
250       base.  You will need to use restorecon to apply the labels.
251
252

COMMANDS

254       semanage fcontext can also be used to manipulate default  file  context
255       mappings.
256
257       semanage  permissive  can  also  be used to manipulate whether or not a
258       process type is permissive.
259
260       semanage module can also be used to enable/disable/install/remove  pol‐
261       icy modules.
262
263       semanage port can also be used to manipulate the port definitions
264
265       semanage boolean can also be used to manipulate the booleans
266
267
268       system-config-selinux is a GUI tool available to customize SELinux pol‐
269       icy settings.
270
271

AUTHOR

273       This manual page was auto-generated using sepolicy manpage .
274
275