1eventlogd_selinux(8)       SELinux Policy eventlogd       eventlogd_selinux(8)
2
3
4

NAME

6       eventlogd_selinux  -  Security  Enhanced Linux Policy for the eventlogd
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the eventlogd  processes  via  flexible
11       mandatory access control.
12
13       The  eventlogd processes execute with the eventlogd_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep eventlogd_t
20
21
22

ENTRYPOINTS

24       The  eventlogd_t  SELinux  type can be entered via the eventlogd_exec_t
25       file type.
26
27       The default entrypoint paths for the eventlogd_t domain are the follow‐
28       ing:
29
30       /usr/sbin/eventlogd, /opt/likewise/sbin/eventlogd
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       eventlogd  policy is very flexible allowing users to setup their event‐
40       logd processes in as secure a method as possible.
41
42       The following process types are defined for eventlogd:
43
44       eventlogd_t
45
46       Note: semanage permissive -a  eventlogd_t  can  be  used  to  make  the
47       process  type  eventlogd_t  permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  event‐
54       logd policy is extremely flexible and has several booleans  that  allow
55       you to manipulate the policy and run eventlogd with the tightest access
56       possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

MANAGED FILES

68       The  SELinux process type eventlogd_t can manage files labeled with the
69       following file types.  The paths listed are the default paths for these
70       file types.  Note the processes UID still need to have DAC permissions.
71
72       cluster_conf_t
73
74            /etc/cluster(/.*)?
75
76       cluster_var_lib_t
77
78            /var/lib/pcsd(/.*)?
79            /var/lib/cluster(/.*)?
80            /var/lib/openais(/.*)?
81            /var/lib/pengine(/.*)?
82            /var/lib/corosync(/.*)?
83            /usr/lib/heartbeat(/.*)?
84            /var/lib/heartbeat(/.*)?
85            /var/lib/pacemaker(/.*)?
86
87       cluster_var_run_t
88
89            /var/run/crm(/.*)?
90            /var/run/cman_.*
91            /var/run/rsctmp(/.*)?
92            /var/run/aisexec.*
93            /var/run/heartbeat(/.*)?
94            /var/run/pcsd-ruby.socket
95            /var/run/corosync-qnetd(/.*)?
96            /var/run/corosync-qdevice(/.*)?
97            /var/run/corosync.pid
98            /var/run/cpglockd.pid
99            /var/run/rgmanager.pid
100            /var/run/cluster/rgmanager.sk
101
102       eventlogd_var_lib_t
103
104            /var/lib/likewise/db/lwi_events.db
105            /var/lib/likewise-open/db/lwi_events.db
106
107       eventlogd_var_run_t
108
109            /var/run/eventlogd.pid
110
111       root_t
112
113            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
114            /
115            /initrd
116
117

FILE CONTEXTS

119       SELinux requires files to have an extended attribute to define the file
120       type.
121
122       You can see the context of a file using the -Z option to ls
123
124       Policy governs the access  confined  processes  have  to  these  files.
125       SELinux eventlogd policy is very flexible allowing users to setup their
126       eventlogd processes in as secure a method as possible.
127
128       STANDARD FILE CONTEXT
129
130       SELinux defines the file context types for the eventlogd, if you wanted
131       to store files with these types in a diffent paths, you need to execute
132       the semanage command to specify alternate labeling  and  then  use  re‐
133       storecon to put the labels on disk.
134
135       semanage  fcontext  -a  -t  eventlogd_var_lib_t  '/srv/myeventlogd_con‐
136       tent(/.*)?'
137       restorecon -R -v /srv/myeventlogd_content
138
139       Note: SELinux often uses regular expressions  to  specify  labels  that
140       match multiple files.
141
142       The following file types are defined for eventlogd:
143
144
145
146       eventlogd_exec_t
147
148       -  Set  files with the eventlogd_exec_t type, if you want to transition
149       an executable to the eventlogd_t domain.
150
151
152       Paths:
153            /usr/sbin/eventlogd, /opt/likewise/sbin/eventlogd
154
155
156       eventlogd_var_lib_t
157
158       - Set files with the eventlogd_var_lib_t type, if you want to store the
159       eventlogd files under the /var/lib directory.
160
161
162       Paths:
163            /var/lib/likewise/db/lwi_events.db,             /var/lib/likewise-
164            open/db/lwi_events.db
165
166
167       eventlogd_var_run_t
168
169       - Set files with the eventlogd_var_run_t type, if you want to store the
170       eventlogd files under the /run or /var/run directory.
171
172
173
174       eventlogd_var_socket_t
175
176       -  Set files with the eventlogd_var_socket_t type, if you want to treat
177       the files as eventlogd var socket data.
178
179
180       Paths:
181            /var/lib/likewise/.eventlog,         /var/lib/likewise/rpc/socket,
182            /var/lib/likewise-open/.eventlog,               /var/lib/likewise-
183            open/rpc/socket
184
185
186       Note: File context can be temporarily modified with the chcon  command.
187       If  you want to permanently change the file context you need to use the
188       semanage fcontext command.  This will modify the SELinux labeling data‐
189       base.  You will need to use restorecon to apply the labels.
190
191

COMMANDS

193       semanage  fcontext  can also be used to manipulate default file context
194       mappings.
195
196       semanage permissive can also be used to manipulate  whether  or  not  a
197       process type is permissive.
198
199       semanage  module can also be used to enable/disable/install/remove pol‐
200       icy modules.
201
202       semanage boolean can also be used to manipulate the booleans
203
204
205       system-config-selinux is a GUI tool available to customize SELinux pol‐
206       icy settings.
207
208

AUTHOR

210       This manual page was auto-generated using sepolicy manpage .
211
212

SEE ALSO

214       selinux(8),  eventlogd(8), semanage(8), restorecon(8), chcon(1), sepol‐
215       icy(8), setsebool(8)
216
217
218
219eventlogd                          21-11-19               eventlogd_selinux(8)
Impressum