1firewallgui_selinux(8)    SELinux Policy firewallgui    firewallgui_selinux(8)
2
3
4

NAME

6       firewallgui_selinux  - Security Enhanced Linux Policy for the firewall‐
7       gui processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the firewallgui processes via  flexible
11       mandatory access control.
12
13       The  firewallgui processes execute with the firewallgui_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep firewallgui_t
20
21
22

ENTRYPOINTS

24       The  firewallgui_t  SELinux  type  can  be  entered  via  the firewall‐
25       gui_exec_t file type.
26
27       The default entrypoint paths for the firewallgui_t domain are the  fol‐
28       lowing:
29
30       /usr/share/system-config-firewall/system-config-firewall-mechanism.py
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       firewallgui policy is very flexible allowing users to setup their fire‐
40       wallgui processes in as secure a method as possible.
41
42       The following process types are defined for firewallgui:
43
44       firewallgui_t
45
46       Note: semanage permissive -a firewallgui_t can  be  used  to  make  the
47       process  type firewallgui_t permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy  is customizable based on least access required.  fire‐
54       wallgui policy is extremely flexible and has several booleans that  al‐
55       low  you to manipulate the policy and run firewallgui with the tightest
56       access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type firewallgui_t can manage  files  labeled  with
76       the  following  file types.  The paths listed are the default paths for
77       these file types.  Note the processes UID still need to have  DAC  per‐
78       missions.
79
80       firewallgui_tmp_t
81
82
83       krb5_host_rcache_t
84
85            /var/tmp/krb5_0.rcache2
86            /var/cache/krb5rcache(/.*)?
87            /var/tmp/nfs_0
88            /var/tmp/DNS_25
89            /var/tmp/host_0
90            /var/tmp/imap_0
91            /var/tmp/HTTP_23
92            /var/tmp/HTTP_48
93            /var/tmp/ldap_55
94            /var/tmp/ldap_487
95            /var/tmp/ldapmap1_0
96
97       systemd_passwd_var_run_t
98
99            /var/run/systemd/ask-password(/.*)?
100            /var/run/systemd/ask-password-block(/.*)?
101
102

FILE CONTEXTS

104       SELinux requires files to have an extended attribute to define the file
105       type.
106
107       You can see the context of a file using the -Z option to ls
108
109       Policy governs the access  confined  processes  have  to  these  files.
110       SELinux  firewallgui  policy  is  very flexible allowing users to setup
111       their firewallgui processes in as secure a method as possible.
112
113       STANDARD FILE CONTEXT
114
115       SELinux defines the file context types  for  the  firewallgui,  if  you
116       wanted  to store files with these types in a diffent paths, you need to
117       execute the semanage command to specify alternate labeling and then use
118       restorecon to put the labels on disk.
119
120       semanage  fcontext  -a  -t  firewallgui_tmp_t  '/srv/myfirewallgui_con‐
121       tent(/.*)?'
122       restorecon -R -v /srv/myfirewallgui_content
123
124       Note: SELinux often uses regular expressions  to  specify  labels  that
125       match multiple files.
126
127       The following file types are defined for firewallgui:
128
129
130
131       firewallgui_exec_t
132
133       - Set files with the firewallgui_exec_t type, if you want to transition
134       an executable to the firewallgui_t domain.
135
136
137
138       firewallgui_tmp_t
139
140       - Set files with the firewallgui_tmp_t type, if you want to store fire‐
141       wallgui temporary files in the /tmp directories.
142
143
144
145       Note:  File context can be temporarily modified with the chcon command.
146       If you want to permanently change the file context you need to use  the
147       semanage fcontext command.  This will modify the SELinux labeling data‐
148       base.  You will need to use restorecon to apply the labels.
149
150

COMMANDS

152       semanage fcontext can also be used to manipulate default  file  context
153       mappings.
154
155       semanage  permissive  can  also  be used to manipulate whether or not a
156       process type is permissive.
157
158       semanage module can also be used to enable/disable/install/remove  pol‐
159       icy modules.
160
161       semanage boolean can also be used to manipulate the booleans
162
163
164       system-config-selinux is a GUI tool available to customize SELinux pol‐
165       icy settings.
166
167

AUTHOR

169       This manual page was auto-generated using sepolicy manpage .
170
171

SEE ALSO

173       selinux(8), firewallgui(8), semanage(8), restorecon(8),  chcon(1),  se‐
174       policy(8), setsebool(8)
175
176
177
178firewallgui                        21-11-19             firewallgui_selinux(8)
Impressum